References
- O. F. Ochonogor et al., Effects of Ti and TiC ceramic powder on laser-cladded Ti-6Al-4V in situ intermetallic composite, Appl. Surf. Sci. 263, 591 (2012). DOI: https://doi.org/10.1016/j.apsusc.2012.09.114.
- Z. D. Liu et al., In situ synthesis of TiN/Ti3Al intermetallic matrix composite coatings on Ti6Al4V alloy, Mater. Des. 37, 268 (2012). DOI: https://doi.org/10.1016/j.matdes.2011.12.008.
- A. P. I. Popoola et al., In-situ formation of laser Ti6Al4V-TiB composite coatings on Ti6Al4V alloy for biomedical application, Surf. Coat. Technol. 285, 161 (2016). DOI: https://doi.org/10.1016/j.surfcoat.2015.10.079.
- M. Das et al., In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: Microstructure, tribological and in-vitro biocompatibility, J. Mech. Behav. Biomed. Mater. 29, 259 (2014). DOI: https://doi.org/10.1016/j.jmbbm.2013.09.006.
- T. N. Baker and M. S. Selamat, Surface engineering of Ti–6Al–4V by nitriding and powder alloying using CW CO2 laser, Mater. Sci. Technol. 24 (2), 189 (2008). DOI: https://doi.org/10.1179/174328407X226563.
- S. Liu et al., Ti-based composite coatings with gradient TiCx reinforcements on TC4 titanium alloy prepared by laser cladding, Sci. China Technol. Sci. 57 (7), 1454 (2014). DOI: https://doi.org/10.1007/s11431-014-5566-5.
- G. Lian and M. Jean, Microstructural evolution and wear behavior of HVOF spraying WC/Co coatings produced by laser cladding, Acta Phys. Pol. A 134 (1), 93 (2018). DOI: https://doi.org/10.12693/APhysPolA.134.93.
- Y. Yao et al., Effect of three different electrolyte additives on corrosion resistance of micro-arc oxidation coating of NiTi alloy in simulated body fluid, Int. J. Electrochem. Sci. 15, 11845 (2020). DOI: https://doi.org/10.20964/2020.12.13.
- D. H. Kim et al., Characterization of diamond-like carbon films deposited on commercially pure Ti and Ti-6Al-4V, Mater. Sci. Eng. C 22 (1), 9 (2002). DOI: https://doi.org/10.1016/S0928-4931(02)00106-6.
- F. Weng, C. Chen, and H. Yu, Research status of laser cladding on titanium and its alloys: A review, Mater. Des. 58, 412 (2014). DOI: https://doi.org/10.1016/j.matdes.2014.01.077.
- C. Li et al., Microstructure and wear behaviors of WC-Ni coatings fabricated by laser cladding under high frequency micro-vibration, Appl. Surf. Sci. 485, 513 (2019). DOI: https://doi.org/10.1016/j.apsusc.2019.04.245.
- L. Y. Fang et al., Reactive fabrication and effect of NbC on microstructure and tribological properties of CrS Co-based self-lubricating coatings by laser cladding, Materials 11 (1), 44 (2017). DOI: https://doi.org/10.3390/ma11010044.
- C. C. Qu et al., Effects of the content of MoS2 on microstructural evolution and wear behaviors of the laser-clad coatings, Surf. Coat. Technol. 357, 811 (2019). DOI: https://doi.org/10.1016/j.surfcoat.2018.10.100.
- X.-B. Liu et al., Effects of aging treatment on microstructure and tribological properties of nickel-based high-temperature self-lubrication wear resistant composite coatings by laser cladding, Mater. Chem. Phys. 143 (2), 616 (2014). DOI: https://doi.org/10.1016/j.matchemphys.2013.09.043.
- L. Yanan et al., Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings, Opt. Lasers Eng. 120, 84 (2019). DOI: https://doi.org/10.1016/j.optlaseng.2019.03.001.
- X.-B. Liu et al., A comparative study of laser cladding high temperature wear-resistant composite coating with the addition of self-lubricating WS2 and WS2/(Ni-P) encapsulation, J. Mater. Process. Technol. 213 (1), 51 (2013). DOI: https://doi.org/10.1016/j.jmatprotec.2012.07.017.
- K. Wang et al., Microstructure and properties of WC reinforced Ni-based composite coatings with Y2O3 addition on titanium alloy by laser cladding, Sci. Technol. Weld. Join. 24 (5), 517 (2019). DOI: https://doi.org/10.1080/13621718.2019.1580441.
- H. Torres et al., Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications, Tribol. Int. 126, 153 (2018). DOI: https://doi.org/10.1016/j.triboint.2018.05.015.