References
- X. H. Zhang et al., Review of nano-phase effects in high strength and conductivity copper alloys, Nanotechnol. Rev. 8 (1), 383 (2019). DOI: https://doi.org/10.1515/ntrev-2019-0034.
- T. Li et al., High strength and conductivity copper matrix composites reinforced by in-situ graphene through severe plastic deformation processes, J. Alloys Compd. 851, 156703 (2021). DOI: https://doi.org/10.1016/j.jallcom.2020.156703.
- D. K. Rajak, and P. L. Menezes, Application of metal matrix composites in engineering sectors, in Reference Module in Materials Science and Materials Engineering (Elsevier, New York, 2021). DOI: https://doi.org/10.1016/b978-0-12-803581-8.11832-6.
- A. Jamwal et al., Towards sustainable copper matrix composites: manufacturing routes with structural, mechanical, electrical and corrosion behaviour, J. Compos. Mater. 54 (19), 2635 (2020). DOI: https://doi.org/10.1177/0021998319900655.
- E. Botcharova, J. Freudenberger, and L. Schultz, Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu-Nb alloys, Acta Mater. 54 (12), 3333 (2006). DOI: https://doi.org/10.1016/j.actamat.2006.03.021.
- L. P. Deng et al., Thermal stability of Cu-Nb microcomposite wires, Acta Mater. 101, 181 (2015). DOI: https://doi.org/10.1016/j.actamat.2015.08.032.
- N. Jia, D. Raabe, and X. Zhao, Crystal plasticity modeling of size effects in rolled multilayered Cu-Nb composites, Acta Mater. 111, 116 (2016). DOI: https://doi.org/10.1016/j.actamat.2016.03.055.
- S. I. Hong, and M. A. Hill, Microstructural stability and mechanical response of Cu-Ag microcomposite wires, Acta Mater. 46 (12), 4111 (1998). DOI: https://doi.org/10.1016/S1359-6454(98)00106-2.
- Y. Sakai, and H. J. SchneiderMuntau, Ultra-high strength, high conductivity Cu-Ag alloy wires, Acta Mater. 45 (3), 1017 (1997). DOI: https://doi.org/10.1016/S1359-6454(96)00248-0.
- Y. Z. Tian et al., Microstructural evolution and mechanical properties of a two-phase Cu-Ag alloy processed by high-pressure torsion to ultrahigh strains, Acta Mater. 59 (7), 2783 (2011). DOI: https://doi.org/10.1016/j.actamat.2011.01.017.
- S. Curiotto et al., Effect of cooling rate on the solidification of CU58CO42, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process 449–451, 644 (2007). DOI: https://doi.org/10.1016/j.msea.2006.02.375.
- Y. Zhang et al., Effect of undercooling on particle size distribution in phase separated Cu75Co25 − xMx (M = Ni, Fe) alloys with low M content, J. Alloys Compd. 596, 55 (2014). DOI: https://doi.org/10.1016/j.jallcom.2014.01.182.
- Z. G. Zhang et al., Characterization and tribological properties of graphene/copper composites fabricated by electroless plating and powder metallurgy, Acta Metall. Sin. (Engl. Lett.) 33 (7), 903 (2020). DOI: https://doi.org/10.1007/s40195-020-01025-z.
- X. Zhang et al., A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites, Nat. Commun. 11 (1), 2775 (2020). DOI: https://doi.org/10.1038/s41467-020-16490-4.
- Y. L. Li et al., Study on preparation of CNTs-Cu composites materials by hydrazine hydrate reduction-solid state sintering process, Ferroelectrics 521, 32 (2017). DOI: https://doi.org/10.1080/00150193.2017.1390992.
- Y. L. Li et al., Study on preparation of CNTs-Cu composites materials by chemical coprecipitation hydrogen reduction solid state sintering process, Integr. Ferroelectr. 183, 210 (2017). DOI: https://doi.org/10.1080/10584587.2017.1330067.
- S. F. Moustafa, Z. Abdel-Hamid, and A. M. Abd-Elhay, Copper matrix SiC and Al2O3 particulate composites by powder metallurgy technique, Mater. Lett. 53 (4–5), 244 (2002). DOI: https://doi.org/10.1016/S0167-577X(01)00485-2.
- B. H. Tian et al., Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process 435–436, 705 (2006). DOI: https://doi.org/10.1016/j.msea.2006.07.129.
- M. Elmahdy, G. Abouelmagd, and A. A. E. Mazen, Microstructure and properties of Cu-ZrO2 nanocomposites synthesized by in situ processing, Mat. Res. 21 (1), e20170387 (2017). DOI: https://doi.org/10.1590/1980-5373-mr-2017-0387.
- A. Abu-Oqail et al., Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites, Ceram. Int. 45 (5), 5866 (2019). DOI: https://doi.org/10.1016/j.ceramint.2018.12.053.
- E. B. Moustafa, and M. A. Taha, Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying, Int. J. Miner. Metall. Mater. 28, 475 (2020). DOI: https://doi.org/10.1007/s12613-020-2176-z.
- S. C. Liu et al., Solidification microstructure evolution and its corresponding mechanism of metastable immiscible Cu80Fe20 alloy with different cooling conditions, J. Alloys Compd. 742, 99 (2018). DOI: https://doi.org/10.1016/j.jallcom.2018.01.306.
- A. S. Lozhkomoev et al., The formation of Fe-Cu composite based on bimetallic nanoparticles, Vacuum 159, 441 (2019). DOI: https://doi.org/10.1016/j.vacuum.2018.10.078.
- F. L. Wang et al., Study of microstructure evolution and properties of Cu-Fe microcomposites produced by a pre-alloyed powder method, Mater. Des. 126, 64 (2017). DOI: https://doi.org/10.1016/j.matdes.2017.04.017.
- W. A. Spitzig et al., Effect of temperature on the strength and conductivity of a deformation processed Cu-20%Fe composite, J. Mater. Sci. 27 (8), 2005 (1992). DOI: https://doi.org/10.1007/BF01117911.
- J. D. Verhoeven, S. C. Chueh, and E. D. Gibson, Strength and conductivity of in situ Cu-Fe alloys, J. Mater. Sci. 24 (5), 1748 (1989). DOI: https://doi.org/10.1007/BF01105700.
- H. Y. Gao et al., Effect of Ag on the microstructure and properties of Cu-Fe in situ composites, Scripta Mater. 53 (10), 1105 (2005). DOI: https://doi.org/10.1016/j.scriptamat.2005.07.028.
- Z. W. Wu, Y. Chen, and L. Meng, Effects of rare earth elements on annealing characteristics of Cu-6 wt.% Fe composites, J. Alloys Compd. 477, 198 (2009). DOI: https://doi.org/10.1016/j.jallcom.2008.10.047.
- L. Qu et al., Experiment and simulation on the thermal instability of a heavily deformed Cu-Fe composite, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process 528 (6), 2532 (2011). DOI: https://doi.org/10.1016/j.msea.2010.12.015.
- Y. L. Bai et al., Uniformly dispersed nano-SiO2 particles reinforced copper matrix by chemical coprecipitation method, Integr. Ferroelectr. 207 (1), 148 (2020). DOI: https://doi.org/10.1080/10584587.2020.1728674.
- M. J. Liu et al., Uniformly dispersed nano-Al2O3 particles reinforced copper matrix by chemical coprecipitation method, Ferroelectrics 546 (1), 129 (2019). DOI: https://doi.org/10.1080/00150193.2019.1592465.