134
Views
0
CrossRef citations to date
0
Altmetric
Section A

Alumina-supported CuO–CeO2–ZrO2 Catalysts for CO Oxidation – Preparation and Characterization

, &
Pages 271-282 | Published online: 06 Nov 2013

References

  • Yu, X. and Ye, S., “Recent Advances in Activity and Durability Enhancement of Pt/C Catalytic Cathode in PEMFC: Part II: Degradation Mechanism and Durability Enhancement of Carbon Supported Platinum Catalyst”, J. Power Sour. 172, p. 145 (2007).
  • Pillai, U.R. and Deevi, S., “Room Temperature Oxidation of Carbon Monoxide Over Copper Oxide Catalyst”, Appl. Catal. B. Environ., 64, pp. 146–151 (2006).
  • Cole, K.J., Carley, A.F., Crudace, M.J., Clarke, M., Taylor, S.H. and Hutchings, G.J., “Copper Manganese Oxide Catalysts Modified by Gold Deposition: The Influence on Activity for Ambient Temperature Carbon Monoxide Oxidation”, Catal. Lett., 138, pp. 143–147 (2010).
  • Harrison, P.G., Ball, I.K., Azelee, W., Daniell, W. and Goldfarb, D., “Nature and Surface Redox Properties of Copper(II)-promoted Cerium(IV) Oxide CO-oxidation Catalysts”, Chem. Mater., 12, pp. 3715–3725 (2000).
  • Mariñ, O.F., Descormr, C. and Duprez, D., “Supported Base Metal Catalysts for the Preferential Oxidation of Carbon Monoxide in the Presence of Excess Hydrogen (PROX)”, Appl Catal. B, 58, pp. 175 (2005).
  • Liu, Y., Fu, Q. and Stephanopoulos, M.F., “Preferential Oxidation of CO in H2 over CuOCeO2 Catalysts”, Catal. Today, 93, pp. 241–246 (2004).
  • Liu, W. and Flytzani-Stephanopoulos, M., “Total Oxidation of Carbon Monoxide and Methane over Transition Metal Fluorite Oxide Composite Catalysts: I. Catalyst Composition and Activity”, Journal of Catalysis, 153(2), pp. 304–316 (1995).
  • Moretti, E., Lenarda, M., Storaro, L., Talon, A., Frattini, R., Polizzi, S., Rodrlguez-Castellon, E. and Jimenez-Lopez, A., “Catalytic Purification of Hydrogen Streams by PROX on Cu Supported on an Organized Mesoporous Ceria-Modified Alumina”, Appl. Catal. B: Environ., 72, pp. 149–156. (2007)
  • Kusar H., Hocevar S. and Levec J., “Kinetics of the Water–Gas Shift Reaction over Nanostructured Copper–Ceria Catalysts”, Appl. Catal. B: Environ., 63, pp. 194–200 (2006).
  • Zheng, X., Zhang, X., Wang, X., Wang, S. and Wu, S., “Preparation and Characterization of CuO/CeO2 Catalysts and their Application in Low-Temperature CO Oxidation”, Appl. Catal. A: Gen., 295, pp. 142–149 (2005).
  • Bera, P., Aruna, S.T., Patil, K.C. and Hegde, M.S. “Studies on Cu/CeO2: A New NO Reduction Catalyst”, J. Catal., 186, pp. 36–44 (1999).
  • Wang, J.B., Tsai, D.H. and Huang, T.J. “Synergistic Catalysis of Carbon Monoxide Oxidation over Copper Oxide Supported on Samaria-Doped Ceria”, J. Catal., 208, pp. 370–380 (2002).
  • Tang, X., Zhang, B., Li, Y., Xu, Y., Xin, Q. and Shen, W., “CuO/CeO2 Catalysts: Redox Features and Catalytic Behaviours”, Appl. Catal. A: Gen., 288, pp. 116–125 (2005).
  • Martínez-Arias A., Fernández-García M., Soria J. and Conesa J.C., “Spectroscopic Study of a Cu/CeO2 Catalyst Submitted to Redox Treatments in CO and O2”. J. Catal., 182, p. 367 (1999).
  • Skårman, B., Nakayama, T., Grandjean, D., Benfield, R.E., Olsson, E., Niihara, K. and Wallenberg, L.R., “Morphology and Structure of CuOx/CeO2 Nanocomposite Catalysts Produced by Inert Gas Condensation: An HREM, EFTEM, XPS and High-Energy Diffraction Study”, Chem. Mater., 24, pp. 3686–3699 (2002).
  • Di Monte, R. and KaŠpar, J., “Nanostructured CeO2–ZrO2 Mixed Oxides”, J. Mater. Chem., 15, pp. 633–648 (2005).
  • Kaspar, J., Fornasiero, P. and Hickey, N., “Automotive Catalytic Converters: Current Status and Some Perspectives”, Catal. Today, 77, pp. 419–449 (2003).
  • Kapoor M.P., Raj, A. and Matsumura Y., “Methanol Decomposition over Palladium Supported Mesoporous CeO2–ZrO2 Mixed Oxides”, Microporous Mesoporous Mater., 44, pp. 565–572 (2001).
  • Shinjoh H., “Rare Earth Metals for Automotive Exhaust Catalysts”, J. Alloys Compounds, 408, pp. 1061–1064 (2006).
  • Trovarelli, A., Zamar, F., Llorca, J., de Lietenburg, Dolcetti and Kiss, G.J.T., “Nanophase Fluorite-structured CeO2–ZrO2 Catalyst Prepared by High-energy Mechanical Milling”, J. Catal., 169, pp. 490–502 (1997).
  • Rattan, G. and Prasad, R., “Effect of Preparation Method and Calcinations Temperature on Low Temperature CO Oxidation over CuO–CeO2 Catalysts. Paper presented in International Conference”, Chemcon-2009, 27–30 December, Andhra University, Visakhapatnam, India (2009).
  • Trovarelli A., Leitenburg C.D., Boaro M. and Dolcetti G., “The Utilization of Ceria in Industrial Catalysis”, Catal. Today, 50, pp. 353–367 (1999).
  • Hori, C.E., Permana, H., Ng, K.Y.S., Brenner, A., More, K., Rahmoeller, K.M. and Belton, D., “Thermal Stability of Oxygen Storage Properties in a Mixed CeO2–ZrO2 system”, Appl. Catal. Environ., 16, pp. 105–117 (1998).
  • Di Monte, R. and Kašpar, J., “Nanostructured CeO2–ZrO2 Mixed Oxides”, J. Mater. Chem., 15, pp. 633–648 (2005).
  • Balducci, G., Fornasiero, P., Monte, R. Di, Kaspar, J., Meriani, S. and Graziani, M., “An Unusual Promotion of the Redox Behaviour of CeO2–ZrO2 Solid Solutions Upon Sintering at High Temperature”, Catal. Lett., 33, pp. 193–200 (1995).
  • Cao, J.-L., Wang, Y., Zhang, T.-Y., Wu, S.-H. and Yuan, Z.-Y., “Preparation, Characterization and Catalytic Behavior of Nanostructured Mesoporous CuO/Ce0.8Zr0.2O2 Catalysts for Low-temperature CO Oxidation”, Appl. Catal. B: Environ., 78, pp. 120–128 (2008).
  • Ayastuy J.L., Gurbani A., González-Marcos M.P. and Gutiérrez-Ortiz M.A., “CO Oxidation on CeXZr1-XO2-supported CuO Catalysts: Correlation Between Activity and Support Composition”, Appl. Catal. A: Gen., 387, pp. 119–128 (2010).
  • Aguila, G., Gracia, F. and Araya, P., “CuO and CeO2 Catalysts Supported on Al2O3, ZrO2 and SiO2 in the Oxidation of CO at Low Temperature”, Appl. Catal. A: Gen., 343(1–2), pp. 16–24 (2008).
  • Huber, F., Venvik, H., Rønning, M., Walmsley, J. and Holmen, A., “Preparation and Characterization of Nanocrystalline, High-surface Area Cu Ce Zr Mixed Oxide Catalysts from Homogeneous Co-precipitation”, Chem. Eng. J., 137, pp. 686–702 (2008).
  • Qin, J., Lu, J., Cao, M. and Hu, Y., “Synthesis of Porous CuO–CeO2 Nanospheres With an Enhanced Low-temperature CO Oxidation Activity”, Nanoscale, 2, pp. 2739–2743 (2010).
  • Prasad, R. and Rattan, G., “Preparation Methods and Applications of CuO–CeO2 Catalysts: A Short Review”, Bull. Chem. React. Eng. Catal., 5(1), pp. 7–30, (2010).
  • Liang, Q., Wu, X., Weng, D. and Lu, Z., “Selective Oxidation of Soot over Cu Doped Ceria/ Ceria–Zirconia Catalysts”, Catal. Commun., 9, pp. 202–206 (2008).
  • Avgouropoulos, G. and Ioannides, T., “Selective CO Oxidation over CuO–CeO2 Catalysts Prepared via the Urea–Nitrate Combustion Method”, Appl. Catal. A: Gen., 244, pp. 155–167 (2003).
  • Liu, Y., Fu, Q. and Stephanopoulos, M.F., “Preferential Oxidation of CO in H2 over CuOCeO2 Catalysts”, Catal. Today, 93, pp. 241–246 (2004).
  • Prasad, R. and Rattan, Gaurav, “Design of a Compact and Versatile Bench Scale Tubular Reactor”, Bull. Chem. React. Eng. Catal., 4(1), pp. 5–9 (2009).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.