Optimisation and performance evaluation of an environmentally friendly rocket composite propellant

References

• Ramesh, K., Jawalkar, S.N., Sachdeva, S. and Bhattacharya, B., “Development of a Composite Propellant Formulation with a High Performance Index Using a Pressure Casting Technique”, Cent. Eur. J. Energ. Mater., 9(1), pp. 49–58 (2012).
   Google Scholar
• Shekhar, H., “Mathematical Formulation and Validation of Muraour’s Linear Burning Rate Law for Solid Rocket Propellants”, Cent. Eur. J Energ. Mater., 9(4), pp. 353–364 (2012).
   Google Scholar
• Rodić, V. and Petrić, M., “The Effect of Additives on Solid Rocket Propellant Characteristics”, Scienti. Tech. Rev., 54(3–4), pp. 9–14 (2004).
   Google Scholar
• Lempert, D., Manelis, G. and Nechiporenko, G., “The Ways for Development of Environmentally Safe Solid Composite Propellants”, Prog. Prop. Phys., 1, pp. 63–80 (2009). doi: 10.1051/eucass/200901063
   Google Scholar
• Bose, P., Pandey, K. and Reddy, K., “CFD Analysis of Solid Fuel Scramjet Combustors”, Glob. J. Res. Eng., 12(7-A), pp. 1–11 (2013).
   Google Scholar
• Lilley, J.S., Method for Burning Rate Characterization of Solid Propellants, Google Patents United States patent US 4,554,823 (1985).
   Google Scholar
• Dennis, J.E., John, E. and Torczon, V., “Direct Search Methods on Parallel Machines”, SIAM J. Optim., 1(4), pp. 448–474 (1991). doi: 10.1137/0801027
   Web of Science ®Google Scholar
• Aziz, A. and Ali, W.K.W., “The Study of Burning Characteristics of AP/HTPB/AL Basic Components of a Composite Propellant”, J. Aeros. Eng. Technol., 1(1), pp. 21–26 (2011).
   Google Scholar
• Miller, T. and Herr, J., Green rocket propulsion by reaction of Al and Mg powders and water. in 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit (2004).
   Google Scholar
• Brill, T. and Budenz, B., “Flash Pyrolysis of Ammonium Perchlorate-Hydroxyl-Terminated-Polybutadiene Mixtures Including Selected Additives”, Solid Propell. Chem. Combust. Motor Int. Ballist., 185, pp. 3–32 (2000). doi: 10.2514/5.9781600866562.0003.0032
   Google Scholar
• Vyazovkin, S. and Wight, C.A., “Thermal Decomposition of Ammonium Dinitramide at Moderate and High Temperatures”, J. Phys. Chem. A, 101(39), pp. 7217–7221 (1997). doi: 10.1021/jp963116j
   Web of Science ®Google Scholar
• Rahm, M. and Brinck, T., “Kinetic Stability and Propellant Performance of Green Energetic Materials”, Chemist. Europ. J., 16(22), pp. 6590–6600 (2010). doi: 10.1002/chem.201000413
   PubMed Web of Science ®Google Scholar
• Agrawal, J.P., High Energy Materials: Propellants, Explosives and Pyrotechnics, Wiley VCH Verlag GmbH & Co., Weinheim, Germany (2010).
   Google Scholar
• Greatrix, D., Parametric Evaluation of Solid Rocket Motor Internal Ballistics. in 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. 2010.
   Google Scholar
• Ogunleye, O.O., Hammed, J.O. and Alagbe, S.O., “Optimization of Potassium Nitrate Based Solid Propellant Grains Formulation Using Response Surface Methodology”, Advan. Sci. Technol. Resear. J., 9(27), pp. 123–134 (2015). doi: 10.12913/22998624/59094
   Web of Science ®Google Scholar
• Myers, R. and Montgonery, D., DC Process and Product Optimization Using Designed Experiments, Montgomery Wiley, New York (2002).
   Google Scholar
• Hainline, R., Design Optimization Of Solid Rocket Motor Grains For Internal Ballistic Performance, Missouri State University, Springfield, MO (2006).
   Google Scholar
• Minto, C. and Vuyk, J., Response Surface Modelling of Drug Interactions, in Advances in Modelling and Clinical Application of Intravenous Anaesthesia, Springer, Boston, MA, pp. 35–43 (2003).
   Google Scholar
• Bezerra, M.A., Oliveira, E.P., Villar, L.S. and Escaleira, L.A., “Response Surface Methodology (RSM) as a Tool for Optimization in Analytical Chemistry”, Talanta, 76(5), pp. 965–977 (2008). doi: 10.1016/j.talanta.2008.05.019
   PubMed Web of Science ®Google Scholar
• Oehlert, G.W., Design and Analysis of Experiments: Response Surface Design, W.H. Freeman and Company, New York (2000).
   Google Scholar
• Olajide, J., Afolabi, T. and Adeniran, J., “Optimization of oil Yield From Groundnut Kernel (Arachis Hypogeae) in an Hydraulic Press Using Response Surface Methodology”, J Scient. Res. Report., 3(14), pp. 1916–1926 (2014).
   Google Scholar
• Olajide, J.O., Afolabi, T.J. and Adeniran, J.A., “Optimization of oil Yield From Shea Kernels Using Response Surface Methodology and Adaptive Neuro Fuzzy Inference System (ANFIS)”, Int. J. Eng., 3(8), pp. 1916–1926 (2014).
   Google Scholar
• Rahmat, M.Z.Y., Jaafar, M.N., Abdul-Latif, A., Wan Ali, W.K., Yajid, Z.M. and Kimsin, I.N., Propellant Development For Small Rockets, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia (2005).
   Google Scholar
• Yang, V., Solid Propellant Chemistry Combustion and Motor Interior Ballistics 1999, Vol. 185, Aerospace Research Central, Reston, VA (2000).
   Google Scholar
• Kurian, A., et al., Evaluation of pot life of HTPB propellant using different isocyanates as curatives. in 3rd International High Energy Materials Conference and Exhibit (2000).
   Google Scholar
• Arkhipov, V.A. and Korotkikh, A.G., “The Influence of Aluminum Powder Dispersity on Composite Solid Propellants Ignitability by Laser Radiation”, Combust. Flame, 159(1), pp. 409–415 (2012). doi: 10.1016/j.combustflame.2011.06.020
   Web of Science ®Google Scholar
• Hadzik, J., Koślik, P., Wilk, Z., Frodyma, A. and Habera, Ł., “Experimental Study on Ammonium Nitrate (V)-Based Solid Propellants for Fracturing Wells”, Cent. Europ. J. Energ. Mater., 14(3), pp. 660–674 (2017). doi: 10.22211/cejem/76721
   Web of Science ®Google Scholar
• Oommen, C. and Jain, S., “Ammonium Nitrate: a Promising Rocket Propellant Oxidizer”, J. Hazard. Mater., 67(3), pp. 253–281 (1999). doi: 10.1016/S0304-3894(99)00039-4
   PubMed Web of Science ®Google Scholar
• Carro, R., Stephens, M., Arvanetes, J., Powell, A., Petersen, E. and Smith, C., High-pressure testing of composite solid propellant mixtures: Burner facility characterization. in 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (2005).
   Google Scholar
• Stephens, M., Sammet, T., Carro, R., LePage, A., Reid, D., Seal, S. and Petersen, E., New additives for modifying the burn rate of composite solid propellants. in 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (2006).
   Google Scholar
• Hooper, J., Hamshere, B. and Kilpin, D., AMRL Study of Composite Propellants for IR Decoy Application, Technical Report, DSTO-TR-0044, Aeronautical and Maritime Research Laboratory, Australia (1994).
   Google Scholar
• Gupta, G., Jawale, L., Maurya, M. and Bhattacharya, B. “Various Methods for the Determination of the Burning Rates of Solid Propellants: an Overview”, Central Eur. J Energ Mater., 12(3), pp. 593–620 (2015).
   Google Scholar
• Fry, R., Solid Propellant Subscale Burning Rate Analysis Methods for US and Selected NATO Facilities, The Johns Hopkins University, Whiting School of Engineering, Columbia, MY (2002).
   Google Scholar
• DeLuca, L.T., Highlights of Solid Rocket Propulsion History, in Chemical Rocket Propulsion, Springer, Cham, Cambodia, pp. 1015–1032 (2017).
   Google Scholar
• López, R., Rosa, O., Salazar, A. and Rodríguez, J., “Structural Integrity of Aged Hydroxyl-Terminated Polybutadiene Solid Rocket Propellant”, J. Propul. Power, 34(1), pp. 75–84 (2017). doi: 10.2514/1.B36496
   Web of Science ®Google Scholar
• Rajesh, S., Suresh, G. and Mohan, R.C., “A Review on Material Selection and Fabrication of Composite Solid Rocket Motor (SRM) Casing”, Int. J Mech. Solid, 9(1), pp. 125–138 (2017).
   Google Scholar
• Talik, J., Luce, J., Froelich, J., Shang, M., Rasheed, R.M. and Roland, J.S., Electric Propellant Feed System for Amateur Class High Altitude Sounding Rockets. in AIAA SPACE and Astronautics Forum and Exposition (2017).
   Google Scholar
• Nguyen, B., Faruqui, K., Robles, L.R., Ho, J., Wagner, G., Surmi, J., Carter, A., Hinz, T., Kakish, F., Zousel, Z., Matthys, K. and Piacenza, J., Overview of Current Hybrid Propulsion Research and Development. in ASME 2017 International Mechanical Engineering Congress and Exposition, Volume 1: Advances in Aerospace Technology, Tampa, FL, American Society of Mechanical Engineers (2017).
   Google Scholar
• Chauhan, M.D., Effect of Green Compact Density on 3Ni-Al and 3Ni-Al-CNT Composite Synthesis Through Electro-Thermal Explosion, San Diego State University, San Diego, CA (2018).
   Google Scholar
• Midi, H., Sarkar, S. and Rana, S., “Collinearity Diagnostics of Binary Logistic Regression Model”, J. Interdisc. Mathem., 13(3), pp. 253–267 (2010). doi: 10.1080/09720502.2010.10700699
   Google Scholar
• Vilares, I. and Kording, K., “Bayesian Models: the Structure of the World, Uncertainty, Behavior, and the Brain”, Ann. N. Y. Acad. Sci., 1224(1), pp. 22–39 (2011). doi: 10.1111/j.1749-6632.2011.05965.x
   PubMed Web of Science ®Google Scholar
• Amiri, S., Jozani, M.J. and Modarres, R., “Randomly Selected Order Statistics in Ranked set Sampling: A Less Expensive Comparable Alternative to Simple Random Sampling”, Environ. Ecol. Stat., 25(2), pp. 1–20 (2018). doi: 10.1007/s10651-018-0402-x
   Web of Science ®Google Scholar
• Neter, J., Kutner, M.H., Natchtsheim, C.J. and Li, W., Applied Linear Statistical Models, Vol. 4, Irwin Chicago, Chicago, IL, (1996).
   Google Scholar
• Tsakiridis, P., “Aluminium Salt Slag Characterization and Utilization–A Review”, J. Hazard. Mater., 217-218, pp. 1–10 (2012). doi: 10.1016/j.jhazmat.2012.03.052
   PubMed Web of Science ®Google Scholar
• Shrestha, G., Traina, S.J. and Swanston, C.W., “Black Carbon’s Properties and Role in the Environment: a Comprehensive Review”, Sustainability, 2(1), pp. 294–320 (2010). doi: 10.3390/su2010294
   Google Scholar