References
- Larminie, J., Dicks, A. and McDonald, M.S. Fuel Cell Systems Explained, Vol. 2, Wiley, New York (2003).
- Pukrushpan, J.T., Stefanopoulou, A.G. and Peng, H., Control of Fuel Cell Power Systems: Principles, Modeling, Analysis and Feedback Design, Springer, London (2004).
- Suh, K.W., Modeling, Analysis and Control of Fuel Cell Hybrid Power Systems, Ph.D. Dissertation, Dept. Mech. Eng., Univ. Michigan, Ann Arbor (2006).
- Pukrushpan, J.T., Stefanopoulou, A. and Peng, H., “Control of Fuel Cell Breathing,” IEEE Control Syst. Mag., 24, pp. 30–46 (2004).
- Niknezhadi, A., Allúe-Fantova, M., Kunusch, C. and Ocampo-Martìnez, C. “Design and Implementation of LQR/LQG Strategies for Oxygen Stoichiometry Control in PEM Fuel Cells Based Systems,” J. Power Sources, 196(9), pp. 4277–4282 (2011). doi: 10.1016/j.jpowsour.2010.11.059
- Kunusch, C., Puleston, P., Mayosky, M. and Riera, J., “Sliding Mode Strategy for PEM Fuel Cells Stacks Breathing Control Using a Super-Twisting Algorithm,” IEEE Trans. Control Syst. Technol., 17(1), pp. 167–174, (2009). doi: 10.1109/TCST.2008.922504
- Baroud, Z., Benmiloud, M. and Benalia, A., “Sliding Mode Controller for Breathing Subsystem on a PEM Fuel Cell System,” in: 3rd International Conference on Control and Engineering Information Technology (CEIT), pp. 1–6 (2015).
- Gruber, J.K., Doll, M. and Bordons, C., “Design and Experimental Validation of a Constrained MPC for the Air Feed of a Fuel Cell,” Control. Eng. Pract., 17(8), pp. 875–885 (2009). doi: 10.1016/j.conengprac.2009.02.006
- Gruber, J.K., Bordons, C. and Oliva, A., “Nonlinear MPC for the Airflow in a PEM Fuel Cell Using a Volterra Series Model,” Control. Eng. Pract., 20(2), pp. 205–217 (2012). doi: 10.1016/j.conengprac.2011.10.014
- Sundaresan, K.R. and Krishnaswamy, P.R., “Estimation of Time Delay Time Constant Parameters in Time, Frequency, and Laplace Domains,” Can. J. Chem. Eng., 56(2): pp. 257–262 (1978). doi: 10.1002/cjce.5450560215
- Gruber, J., Bordons, C. and Dorado, F., “Nonlinear Control of the Air Feed of a Fuel Cell,” in: American Control Conference, pp. 1121–1126 (2008).
- Baroud, Z., Benmiloud, M. and Benalia, A., “Modelling and Analysis of Proton Exchange Membrane Fuel Cell System,” in: 3rd International Conference on, Information Processing and Electrical Engineering (ICIPEE), pp. 1–6 (2014).
- Seborg, D.E, Edgar, T.F., Mellichamp, D.A. and Doyle, F.J., Process Dynamics and Control, 3rd ed. Wiley, New York (2011).
- Sigurd Skogestad, “Simple Analytic Rules for Model Reduction and PID Controller Tuning,” J. Process Control, 13(4): pp. 291–309 (2003). doi: 10.1016/S0959-1524(02)00062-8
- Bemporad, A., Morari, M. and Ricker, N.L. “Model Predictive Control Toolbox for Matlab” – User’s Guide. Mathworks (2004).
- Saeed Tavakoli et al., “Tuning of Decentralised PI (PID) Controllers for TITO Processes,” Control. Eng. Pract., 14: pp. 1069–1080 (2006). doi: 10.1016/j.conengprac.2005.06.006
- Sourdillef, P. and O’Dwyer, A., “Implementation of New Modified Smith Predictor Designs,” Proceedings of the Irish Signals and Systems Conference, Queens University, Belfast, pp. 284–289 (2004).
- Smith, O.J.M. “Closer Control of Loops with Dead Time”. Chem. Eng. Prog., 53, pp. 217–219 (1957).