Wear prediction of die coatings in strip ironing by finite element simulation

References

• R. Kuziak, R. Kawalla and S. Waengler: ‘Advanced high strength steels for automotive industry’, Arch. Civil Mech. Eng., 2008, 8, (2), 103–117. doi: 10.1016/S1644-9665(12)60197-6
   Web of Science ®Google Scholar
• E. Schedin: ‘Control of friction in sheet metal forming can result in more stable production’, Mater. Des., 1993, 14, (2), 127–129. doi: 10.1016/0261-3069(93)90006-H
   Google Scholar
• P. Groche and T. Callies: ‘Tribology in sheet metal forming with regard to challenges in lightweight construction’, Adv. Mater. Res., 2005, 6–8, 93–100. doi: 10.4028/www.scientific.net/AMR.6-8.93
   Google Scholar
• K. Osakada and R. Matsumoto: ‘Fundamental study of dry metal forming with coated tools’, CIRP Ann.-Manuf. Technol., 2000, 49, 161–164. doi: 10.1016/S0007-8506(07)62919-9
   Google Scholar
• E. Lugscheider, K. Bobzin, C. Piñero, F. Klocke and T. Massmann: ‘Development of a superlattice (Ti,Hf,Cr)N coating for cold metal forming applications’, Surf. Coat. Technol., 2004, 177–178, 616–622. doi: 10.1016/S0257-8972(03)00935-6
   Web of Science ®Google Scholar
• B. Podgornik, S. Hogmark and O. Sandberg: ‘Influence of surface roughness and coating type on the galling properties of coated forming tool steel’, Surf. Coat. Technol., 2004, 184, (2–3), 338–348. doi: 10.1016/j.surfcoat.2003.11.002
   Web of Science ®Google Scholar
• B. Podgornik, S. Hogmark and O. Sandberg: ‘Proper coating selection for improved galling performance of forming tool steel’, Wear, 2006, 261, (1), 15–21. doi: 10.1016/j.wear.2005.09.005
   Web of Science ®Google Scholar
• K. Holmberg, H. Ronkainen, A. Laukkanen and K. Wallin: ‘Friction and wear of coated surfaces – scales, modelling and simulation of tribomechanisms’, Surf. Coat. Technol., 2007, 202, (4–7), 1034–1049. doi: 10.1016/j.surfcoat.2007.07.105
   Web of Science ®Google Scholar
• F. Clarysse, W. Lauwerens and M. Vermeulen: ‘Tribological properties of PVD tool coatings in forming operations of steel sheet’, Wear, 2008, 264, (5–6), 400–404. doi: 10.1016/j.wear.2006.08.031
   Web of Science ®Google Scholar
• H. Kim, S. Han, Q. Yan and T. Altan: ‘Evaluation of tool materials, coatings and lubricants in forming galvanized advanced high strength steels (AHSS)’, CIRP Ann. Manuf. Technol., 2008, 57, (1), 299–304. doi: 10.1016/j.cirp.2008.03.029
   Web of Science ®Google Scholar
• V. Severo, L. Vilhena, P. N. Silva, J. P. Dias, D. Becker, S. Wagner and A. Cavaleiro: ‘Tribological behaviour of W–Ti–N coatings in semi-industrial strip-drawing tests’, J. Mater. Process. Technol., 2009, 209, (10), 4662–4667. doi: 10.1016/j.jmatprotec.2008.11.040
   Web of Science ®Google Scholar
• B. Sresomroeng, V. Premanond, P. Kaewtatip, A. Khantachawana, N. Koga and S. Watanabe: ‘Anti-adhesion performance of various nitride and DLC films against high strength steel in metal forming operation’, Diam. Relat. Mater., 2010, 19, (7–9), 833–836. doi: 10.1016/j.diamond.2010.02.008
   Web of Science ®Google Scholar
• J. Eriksson and M. Olsson: ‘Tribological testing of commercial CrN, (Ti,Al)N and CrC/C PVD coatings – evaluation of galling and wear characteristics against different high strength steels’, Surf. Coat. Technol., 2011, 205, (16), 4045–4051. doi: 10.1016/j.surfcoat.2011.02.053
   Web of Science ®Google Scholar
• B. Sresomroeng, V. Premanond, P. Kaewtatip, A. Khantachawana, A. Kurosawa and N. Koga: ‘Performance of CrN radical nitrided tools on deep drawing of advanced high strength steel’, Surf. Coat. Technol., 2011, 205, (17–18), 4198–4204. doi: 10.1016/j.surfcoat.2011.03.010
   Web of Science ®Google Scholar
• A. Ghiotti and S. Bruschi: ‘Tribological behaviour of DLC coatings for sheet metal forming tools’, Wear, 2011, 271, (9–10), 2454–2458. doi: 10.1016/j.wear.2010.12.043
   Web of Science ®Google Scholar
• Ã. N. Cora, A. Ag˘cayazı, K. Namiki, H. Sofuog˘lu and M. Koç: ‘Die wear in stamping of advanced high strength steels – investigations on the effects of substrate material and hard-coatings’, Tribol. Int., 2012, 52, 50–60. doi: 10.1016/j.triboint.2012.02.016
   Web of Science ®Google Scholar
• C. Wang, B. Guo, D. Shan and X. Bai: ‘Tribological behaviors of DLC film deposited on female die used in strip drawing’, J. Mater. Process. Technol., 2013, 213, (3), 323–329. doi: 10.1016/j.jmatprotec.2012.10.011
   Web of Science ®Google Scholar
• H. Mori and H. Tachikawa: ‘Increased adhesion of diamond-like carbon–Si coatings and its tribological properties’, Surf. Coat. Technol., 2002, 149, (2–3), 224–229. doi: 10.1016/S0257-8972(01)01449-9
   Google Scholar
• E. M. Bortoleto, A. C. Rovani, V. Seriacopi, F. J. Profito, D. C. Zachariadis, I. F. Machado, A. Sinatora and R. M. Souza: ‘Experimental and numerical analysis of dry contact in the pin on disc test’, Wear, 2013, 301, (1–2), 19–26. doi: 10.1016/j.wear.2012.12.005
   Web of Science ®Google Scholar
• T. J. Rupert and C. A. Schuh: ‘Sliding wear of nanocrystalline Ni–W: structural evolution and the apparent breakdown of Archard scaling’, Acta Mater., 2010, 58, (12), 4137–4148. doi: 10.1016/j.actamat.2010.04.005
   Web of Science ®Google Scholar
• J. F. Archard: ‘Contact and rubbing of flat surfaces’, J. Appl. Phys., 1953, 24, (8), 981–988. doi: 10.1063/1.1721448
   Web of Science ®Google Scholar
• J. H. Kang, I. W. Park, J. S. Jae and S. S. Kang: ‘A study on a die wear model considering thermal softening: (I) Construction of the wear model’, J. Mater. Process. Technol., 1999, 96, (1–3), 53–58. doi: 10.1016/S0924-0136(99)00103-X
   Web of Science ®Google Scholar
• J. H. Kang, I. W. Park, J. S. Jae and S. S. Kang: ‘A study on die wear model considering thermal softening (II): application of the suggested wear model’, J. Mater. Process. Technol., 1999, 94, (2–3), 183–188. doi: 10.1016/S0924-0136(99)00104-1
   Web of Science ®Google Scholar
• R. Liu and D. Y. Li: ‘Modification of Archard's equation by taking account of elastic/pseudoelastic properties of materials’, Wear, 2001, 251, (1–12), 956–964. doi: 10.1016/S0043-1648(01)00711-6
   Web of Science ®Google Scholar
• Z. Wang, K. Dohda and Y. Jeong: ‘FEM simulation of surface smoothing in the ironing process’, J. Mater. Process. Technol., 2001, 113, (1–3), 705–709. doi: 10.1016/S0924-0136(01)00615-X
   Web of Science ®Google Scholar
• H. Kim, T. Altan and Q. Yan: ‘Evaluation of stamping lubricants in forming advanced high strength steels (AHSS) using deep drawing and ironing tests’, J. Mater. Process. Technol., 2009, 209, (8), 4122–4133. doi: 10.1016/j.jmatprotec.2008.10.007
   Web of Science ®Google Scholar
• J. Chen, B. Young and B. Uy: ‘Behavior of high strength structural steel at elevated temperatures’, J. Struct. Eng., 2006, 132, (12), 1948–1954. doi: 10.1061/(ASCE)0733-9445(2006)132:12(1948)
   Web of Science ®Google Scholar
• D. Adamovic, V. Mandic, Z. Jurkovic, B. Grizel, M. Stefanovic, T. Marinkovic and S. Aleksandrovic: ‘An experimental modelling and numerical FE analysis of steel-strip ironing process’, Tech. Gazette., 2010, 17, (4), 435–444.
   Google Scholar
• A. P. Ehiasarian, P. E. Hovsepian, L. Hultman and U. Helmersson: ‘Comparison of microstructure and mechanical properties of chromium nitride-based coatings deposited by high power impulse magnetron sputtering and by the combined steered cathodic arc/unbalanced magnetron technique’, Thin Solid Films, 2004, 457, (2), 270–277. doi: 10.1016/j.tsf.2003.11.113
   Web of Science ®Google Scholar
• W. L. Pan, G. P. Yu and J. H. Huang: ‘Mechanical properties of ion-plated TiN films on AISI D2 steel’, Surf. Coat. Technol., 1998, 110, (1–2), 111–119. doi: 10.1016/S0257-8972(98)00680-X
   Web of Science ®Google Scholar