References
- V. Kuklík and J. Kudláček: ‘Hot-Dip galvanising of steel structures, Butterworth-Heinemann’, (2016). 234 pp. doi:10.1016/C2014-0-03512-5.
- R. Siostrzonek, D. Pavelková, L. Koldová, J. Podjuklová, and P. Strzyž: Mater. Sci. Forum., 2015, 818, 162–166. doi:10.4028/www.scientific.net/MSF.818.162.
- ISO 14713-2, Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 2: Hot dip galvanising, (2009).
- P. Mohyla, Z. Kubon, R. Cep, A. Janasek, and I. Samardzic: Metalurgija, 2014, 53, 25–28. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84879547284&partnerID=40&md5=7cedcc616bc5f0daa1c3ab2a1092137d.
- ISO 2178:2016, Non-magnetic coatings on magnetic substrates – Measurement of coating thickness – Magnetic method, 2016.
- J. Vontorová, D. Beneš, P. Mohyla, and L. Havelka: Magnetic-inductive measurement of the zinc layer on the non-alloy steel sheet, in: Met. 2015 - 24th Int. Conf. Metall. Mater. Conf. Proc., 2015.
- J. Angeli, A. Bengtson, A. Bogaerts, V. Hoffmann, V.-D. Hodoroaba, and E. Steers: J. Anal. At. Spectrom., 2003, 18, 670–679. doi:10.1039/b301293j.
- J. Vontorová and P. Váňová: AIMS Mater. Sci., 2018, 5, 34–43. doi:10.3934/matersci.2018.1.34.
- J. Vontorová, V. Dobiáš, and P. Mohyla: Chem. Pap., 2017, 71, 1507–1514. doi:10.1007/s11696-017-0145-4.
- Y. Liu, W. Jian, J.Y. Wang, S. Hofmann, and K. Shimizu: Appl. Surf. Sci., 2015, 331, 140–149. doi:10.1016/j.apsusc.2015.01.065.
- J. Vontorová, P. Mohyla, and X. Ševčíková: Influence of CMT and MIG soldering on zinc layer thickness, in: Met. 2012 - Conf. Proceedings, 21st Int. Conf. Metall. Mater., 2012.
- N. Fukumuro, J. Nishiyama, K. Shigeta, H. Takagami, S. Yae, and H. Matsuda: Trans. IMF, 2007, 85, 111–112. doi:10.1179/174591907X179866.
- R. Escobar Galindo, E. Forniés, and J.M. Albella: Surf. Coat. Technol., 2006, 200, 6185–6189. doi:10.1016/j.surfcoat.2005.11.064.
- P. Maaß and P. Peißker: Handbook of Hot-Dip Galvanisation, 2011. doi:10.1002/9783527636884.
- P. Rajak, U. Tewary, S. Das, B. Bhattacharya, and N. Chakraborti: Comput. Mater. Sci., 2011, 50, 2502–2516. doi:10.1016/j.commatsci.2011.03.034.
- V. Kuklík: Procedia Eng., 2012. 241–246. doi:10.1016/j.proeng.2012.07.087.
- A.R. Marder: Prog. Mater. Sci., 2000, 45, 191–271. doi:10.1016/S0079-6425(98)00006-1.
- S. Sepper, P. Peetsalu, P. Kulu, M. Saarna, and V. Mikli: Proc. Est. Acad. Sci., 2016, 65, 159–165. doi:10.3176/proc.2016.2.11.
- C.-S. Che, J.-T. Lu, and G. Kong: Trans. Nonferrous Met. Soc. China (English Ed.), 2005, 15, 1275–1279.
- C. Che, J. Lu, G. Kong, and Q. Xu: Acta Metall. Sin. (English Lett.), 2009, 22, 138–145. doi:10.1016/S1006-7191(08)60081-2.
- BS EN 10025-2:2004, Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels, Brit. Stand. 2 (2004). doi:10.3403/30206727.
- ISO 1463:2003, Metallic and oxide coatings – Measurement of coating thickness – Microscopical method, 2003. https://www.iso.org/standard/31239.html.