References
- G. Aktas Celik, S. Polat and S. Hakan Atapek: Trans. Ind. Inst. Met., 2018, 71, 411. doi: 10.1007/s12666-017-1171-1
- F. Nasri, M. Zouari, M. Kharrat, M. Dammak, F. Vacandio and M. Eyraud: Trans. IMF, 2018, 96, 220. doi: 10.1080/00202967.2018.1494876
- G. W. Sawyer, K. D. Freudenberg, P. Bhimaraj and L. S. Schadler: Wear, 2003, 254, 573. doi: 10.1016/S0043-1648(03)00252-7
- D. Barnes, S. Johnson, R. Snell and S. Best: J. Mech. Behavior Biomed. Mater., 2012, 6, 128. doi: 10.1016/j.jmbbm.2011.10.010
- N. M. Renevier, J. Hamphire, V. C. Fox, J. Witts, T. Allen and D. G. Teer: Surf. Coat. Technol., 2001, 142, 67. doi: 10.1016/S0257-8972(01)01108-2
- H. Ichimur and A. Rodrigo: Surf. Coat. Technol., 2000, 126, 152. doi: 10.1016/S0257-8972(00)00541-7
- J. G. Buijnsters, P. Shankar, W. J. P. Enckevort, J. J. Schermer and J. J. Meulena: Thin Solid Films, 2005, 474, 186. doi: 10.1016/j.tsf.2004.09.021
- H. Ichimur and Y. Ishii: Surf. Coat. Technol., 2003, 165, 1. doi: 10.1016/S0257-8972(02)00718-1
- M. Solar, H. Meyer, C. Gauthier, O. Benzerara, R. Schirrer and J. Baschnagel: Wear, 2011, 271, 2751. doi: 10.1016/j.wear.2011.05.026
- M. Barletta, G. Bolelli, A. Gisario and L. Lusvarghi: Prog. Org. Coat., 2008, 61, 262. doi: 10.1016/j.porgcoat.2007.09.029
- M. Barletta, L. Lusvarghi, F. Pighetti Mantini and G. Rubino: Surf. Coat. Technol., 2007, 201, 7479. doi: 10.1016/j.surfcoat.2007.02.017
- S. J. Shaffer and M. J. Rogers: Wear, 2007, 263, 1281. doi: 10.1016/j.wear.2007.01.115
- M. Zouari, M. Kharrat and M. Dammak: Surf. Coat. Technol., 2010, 204, 2593. doi: 10.1016/j.surfcoat.2010.02.001
- M. Zouari, M. Kharrat, M. Dammak and M. Barletta: Prog. Org. Coat., 2014, 77, 1408. doi: 10.1016/j.porgcoat.2014.04.023
- S. Sanli, M. D. Cömlekoglu, E. Cömlekoglu, M. Sonugelen, T. Pamir and B. W. Darvel: Dent. Mater., 2015, 31, (6), 657. doi: 10.1016/j.dental.2015.03.004
- W. Hongqi, Y. Yinping, C. Lei and Z. Huidi: Tribol. Trans., 2016, 59, 889. doi: 10.1080/10402004.2015.1118585
- ISO 8502-3: Preparation of steel substrates before application of paints and related products – Tests to assess the cleanliness of a surface. Part 3: Assessment of dust on steel surfaces prepared for painting (Pressure sensitive tape method).
- NF EN ISO 8502-6: Preparation of steel substrates before application of paint and related products – Tests to assess the cleanliness of a surface. Part 6 – Extraction of soluble contaminants for analysis.
- ISO 8502-6 and 9: Procedure for the detection of water-soluble contaminants.
- ISO 2409: Paints and varnishes: Grid test.
- K. Delbé: Contribution à la compréhension des propriétés tribologiques intrinsèques de composés lamellaires : Application aux composés d'interaction de graphite, PhD thesis, Université des Antilles et de la Guyane, 200 8.
- T. Kagnaya: Contribution à l'identification des mécanismes d'usure d'un WC-6% Co en usinage et par une approche tribologique et thermique, PhD thesis, Mines Paris Tech., 200 9.
- Q. Guo and W. Luo: Wear, 2001, 249, 924. doi: 10.1016/S0043-1648(01)00827-4
- X. Zhang, G. Liao, Q. Jin, X. Feng and X. Jian: Tribol. Int., 2008, 41, 195. doi: 10.1016/j.triboint.2007.08.003