References
- A. Ronen, I. Etsion, and Y. Kligerman: Tribol. Trans., 2001, 44(3), 359–366.
- A. Janssen, M. Dadgar and W. Wietheger: Tribol. Trans., 2019, 62(3), 443–451.
- G. Ryk, Y. Kligerman and I. Etsion: Tribol. Trans., 2002, 45(4), 444–449.
- G. Ryk, Y. Kligerman, I. Etsion and A. Shinkarenko: Tribol. Trans., 2005, 48(4), 583–588.
- G. Ryk and I. Etsion: Wear, 2006, 261(7–8), 792–796.
- R. Bathe, V. S. Krishna, S. Nikumb and G. Padmanabham: Appl. Phys. A, 2014, 117(1), 117–123.
- P. Mishra and P. Ramkumar: Effect of micro texture on tribological performance of piston ring-cylinder liner system under different lubrication regimes, 2018, SAE International.
- Y. Mabuchi, T. Yamashita, H. Izumi, T. Sekikawa, K. Nishimura, S. Hirano and Y. Moriguchi: Tribol. Trans., 2017, 60(6), 1088–1098.
- J. K. Katiyar, S. Bhattacharya, V. K. Patel, and V. Kumar: ‘Introduction of Automotive Tribology’, in ‘Automotive tribology’, 3–13; 2019, Singapore, Springer.
- C. E. Beal and S. Brennan: Veh. Syst. Dyn., 2021, 59(3), 1–27.
- H. Ritchie and M. Roser: ‘Fossil fuels’, 2018. https://ourworldindata.org/fossil-fuels.
- B. Dudley: ‘BP statistical review of world energy’, 2017. 66th edition, p.1. BP plc, London https://www.bp.com/en/global/corporate/energy-economics/statistical-review-of-world-energy.html.
- V. Nagarajan and T. Subramaniam: Int. J. Nanoparticles, 2017, 9(4), 234–243.
- S. Srihari, S. Thirumalini and K. Prashanth: Renew. Energy, 2017, 107, 440–447.
- B. Raj, Y. Jyothi, P. Kanasani and D. Siva Gangadhar: Energy Sources A: Recovery Util. Environ. Eff., 2020, 42(22), 2731–2741. doi:10.1080/15567036.2019.1618985.
- R. York: Soc. Nat. Resour., 2010, 23(12), 1244–1252.
- A. C. Rule: J. Geosci. Educ., 2005, 53(3), 309–318.
- N. Moradi Nasab, M. R. Amin-Naseri, T. J. Behbahani and I. Nakhai Kamal Abadi: Energy Sources B: Econ. Plan. Policy, 2016, 11(7), 651–664.
- A. N. Menegaki and I. Ozturk: Energy Sources B: Econ. Plan. Policy, 2016, 11(9), 824–829.
- G. Fenske. Friction/wear – parasitic energy losses, DOE Vehicle Technologies Program Annual Merit Review, Chicago, 2008.
- A. Z. Szeri: ‘Tribology: friction, lubrication, and wear’; 1980, New York, McGraw-Hill.
- I. Hutchings and P. Shipway: ‘Tribology: friction and wear of engineering materials’; 2017, Oxford, UK, Butterworth-Heinemann.
- F. P. Bowden, D. Tabor, and R. Bruderer: ‘Friction: an introduction to tribology’; 1973, Garden City, NY, Anchor Press.
- P. J. Blau, Friction and wear transitions of materials, 1989.
- A. Arslan, H. H. Masjuki, M. A. Kalam, M. Varman, R. A. Mufti, M. H. Mosarof, L. S. Khuong and M. M. Quazi: Crit. Rev. Solid State Mater. Sci., 2016, 41(6), 447–481.
- R. Ferreira, J. Martins, Ó. Carvalho, L. Sobral, S. Carvalho, and F. Silva, Mater. Manuf. Process., 2020, 35(5), 498–520. doi:10.1080/10426914.2019.1692352
- D. B. Hamilton, J. A. Walowit and C. M. Allen: J. Basic Eng., 1966, 88(1), 177–185.
- I. Etsion: ‘Surface texturing for in-cylinder friction reduction’, in ‘Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends’, (ed. H. Rahnejat) 458-469; 2010, Cambridge, UK, Woodhead Publishing.
- I. Etsion: J. Tribol., 2005, 127(1), 248–253.
- R. Zhou, J. Cao, K. Ehmann, and C. Xu: ‘An investigation on deformation-based micro surface texturing’, ‘Proc. ASME 2011 International Manufacturing Science and Engineering Conference’, Oregon, USA, 13–17 June 2011(paper 44304), 613–619.
- Y. G. Schneider: Precis. Eng., 1984, 6(4), 219–225.
- I. D. Marinescu, W. B. Rowe, B. Dimitrov, and I. Inaski: ‘Tribology of abrasive machining processes’; 2004, Norwich, New York, Elsevier.
- B. Gorowitz and R. J. Saia: ‘Reactive ion etching’, in ‘VLSI electronics microstructure science’, (eds. N. G. Einspruch and D. M. Brown) 297–339; 1984, USA, Elsevier.
- J. A. Wahab, M. J. Ghazali, W. M. W. Yusoff and Z. Sajuri: Trans. IMF, 2016, 94(4), 193–198.
- W. M. Steen: Trans. IMF, 1989, 67(1), 124–126.
- M. M. Mathew, R. N. Bathe, G. Padmanabham, R. Padmanaban, and S. Thirumalini: Int. J. Adv. Manuf. Technol., 2019, 104, 3239–3249. doi:10.1007/s00170-017-1454-z
- M. Arivarasu, P. Roshith, R. Padmanaban, S. Thirumalini, K. V. Phani Prabhakar and G. Padmanabham: Can. Metall. Q., 2017, 56(2), 232–244.
- G. Padmanabham and R. Bathe: Proc. Natl Acad. Sci. India A: Phys. Sci., 2018, 88, 359–374.
- J. D. Majumdar: Surf. Eng., 2007, 23(2), 73–75.
- I. Etsion and E. Sher: Tribol. Internat., 2009, 42(4), 542–547.
- V. Ezhilmaran, L. Vijayaraghavan, N. J. Vasa, S. Ganesan, and N. K. Cherian: J. Laser Micro Nanoeng., 2016, 11(2), 179–184.
- T. Qin, C. Tadokoro, and S. Sasaki: Key Eng. Mater., 2017, 739, 36–41. doi:10.4028/www.scientific.net/KEM.739.36
- C. Shen and M. M. Khonsari: Tribol. Lett., 2016, 64(2). Article 26. DOI 10.1007/s11249-0160757-9
- C. Shen and M. M. Khonsari: Tribol. Int., 2016, 101, 273-283.
- Y. Zhang, C. Yang, Y. Fu, J. Zhou, X. Hua, and N. Ji: Key Eng. Mater., 2008, 359–360, 340–343. doi:10.4028/www.scientific.net/KEM.359-360.340
- A. Viscusi, A. Astarita, S. Genna, and C. Leone: Trans. IMF, 2018, 96(1), 34–40.
- D. A. Aktürk, P. Liu, J. Cao, Q. J. Wang, Z. C. Xia, R. Talwar, D. Grzina, and M. Merklein: Tribol. Int., 2015, 81, 333–340.
- K. Kiran Kumar, G. L. Samuel and M. S. Shunmugam: J. Mater. Proc. Technol., 2019, 263, 266–275.
- K. W. Guo: Ironmak. Steelmak., 2009, 36(1), 63–74.
- M. M. Mathew, R. N. Bathe, G. Padmanabham, R. Padmanaban and S. Thirumalini: Int. J. Adv. Manuf. Technol., 2019, 104(9), 3239–3249.
- Q. Y. Chang, X. L. Zheng, and Q. Liu: Adv. Mater. Res., 2011, 199–200, 734–738.
- O. V. Mannapova, O. D. Sokolov, A. P. Olik, A. I. Kostrzhyts'Kyi and V. I. Tverdokhlib: Mater. Sci., 2008, 44(2), 298–300.
- A. Senatore and D. Aleksendric: Recent Pat. Eng., 2013, 7(1), 51–67.
- A. Senatore and D. Aleksendric: Ind. Lubric. Tribol., 2014, 66(2), 298–305.
- Y. Zhang, X. Zhang, T. Wu and Y. B. Xie: Ind. Lubric. Tribol., 2016, 68(2), 158–169.
- W. Grabon, W. Koszela, P. Pawlus and S. Ochwat: Tribol. Int., 2013, 61, 102–108.
- Z. Guo, C. Yuan, P. Liu, Z. Peng and X. Yan: Tribol. Lett., 2013, 51(1), 9–23.
- J. Jocsak, Y. Li, T. Tian and V. W. Wong: ‘Analyzing the effects of three-dimensional cylinder liner surface texture on ring-pack performance with a focus on honing groove cross-hatch angle’, ‘2005 Fall Technical Conference of the ASME Internal Combustion Engine Division’, 2005, 621–632.
- S. Johansson, P. H. Nilsson, R. Ohlsson, C. Anderberg and B. G. Rosén: Tribol. Int., 2008, 41(9–10), 854–859.
- R. Ma, S. A. Mohamad, X. Lu, and W. Li: ‘Numerical analysis and experimental evaluation of cylinder liner macro-scale surface texturing’, ‘ASME 2015 Internal Combustion Engine Division Fall Technical Conference, ICEF 2015’, 2015.
- S. A. Mohamad, Q. Zheng, and X. Q. Lu: Appl. Mech. Mater., 2014, 620, 278–284. doi:10.4028/www.scientific.net/AMM.620.278
- R. Rahmani, A. Shirvani, and H. Shirvani: ‘Optimised textured surfaces with application in piston ring/cylinder liner contact’, in ‘Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends’, (ed. H. Rahnejat) 470–517; 2010, Cambridge, UK, Woodhead Publishing.
- A. Spencer, A. Almqvist and R. Larsson: Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 2011, 225(7), 683–689.
- B. Yin, X. Li, Y. Fu and W. Yun: Lubric. Sci., 2012, 24(7), 293–312.
- Y. Zhou, H. Zhu, W. Tang, C. Ma and W. Zhang: Tribol. Int., 2012, 52, 1–6.
- K. N. Prasad, I. Syed and S. K. Subbu: Austral. J. Mech. Eng., 2019, 1–16. doi:10.1080/14484846.2019.1705533.
- V. K. Patel and B. M. Ramani: Int. J. Ambient Energy, 2019, 1–6. doi:10.1080/01430750.2019.1693424.
- J. Li, D. Xiong, H. Wu, Z. Huang, J. Dai and R. Tyagi: Tribol. Trans., 2010, 53(2), 195–202.
- B. Mao, A. Siddaiah, Y. Liao and P. L. Menezes: J. Manuf. Proc., 2020, 53, 153–173.
- D. J. W. Barrell and M. Priest: Tribol. Ser., 2004, 43, 807–814.
- Anon: ‘4 hydrodynamic lubrication, in ‘Tribology series’, (eds. G. W. Stachowiak et al.), 121–240; 1993, Amsterdam, Elsevier.
- R. V. Vignesh, R. Padmanaban and M. Govindaraju: Surf. Topogr.: Metrol. Prop., 2019, 7(2), 025020.
- R. Vaira Vignesh, R. Padmanaban, M. Govindaraju and G. Suganya Priyadharshini: Trans. IMF, 2019, 97(5), 261–270.
- E. Tomanik, F. J. Profito and D. C. Zachariadis: Tribol. Int., 2013, 59, 90–96.
- C. Gachot, A. Rosenkranz, S. Hsu and H. Costa: Wear, 2017, 372, 21–41.
- S.-C. Vlădescu, A. Ciniero, K. Tufail, A. Gangopadhyay and T. Reddyhoff: Tribol. Int., 2017, 115, 140–153.
- D. N. Basha, G. Padmanabham, and R. Bathe: Tribological behavior of surface textured gray cast iron at different texture density by ultrafast laser, materials performance and characterization, 2019.
- Y. Kligerman, I. Etsion and A. Shinkarenko: J. Tribol., 2005, 127(3), 632–638.
- X. Liang, X. Wang, Y. Liu, X. Wang, G. Shu and Z. Zhang: Tribol. Trans., 2020, 63(2), 371–381.
- I. Etsion: Tribol. Lett., 2004, 17(4), 733–737.
- Y. Kligerman and A. Shinkarenko: Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 2015, 229(4), 336–349.
- H. Bouassida, N. Biboulet, P. Sainsot, and A. A. Lubrecht: Piston ring load carrying capacity: influence of cross-hatching parameters, American Society of Mechanical Engineers, Tribology Division, TRIB, 53–55; 2012.
- G. B. Gadeschi, K. Backhaus and G. Knoll: J. Tribol., 2012, 134(4). 041702 (8 pages).
- C. Gu, X. Meng, Y. Xie and P. Li: Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 2016, 230(4), 452–471.
- A. Usman and C. W. Park: Tribol. Int., 2016, 99, 224–236.
- H. M. Checo, R. F. Ausas, M. Jai, J.-P. Cadalen, F. Choukroun and G. C. Buscaglia: Tribol. Int., 2014, 72, 131–142.
- D. Gropper, L. Wang and T. J. Harvey: Tribol. Int., 2016, 94, 509–529.
- D. K. Srivastava and A. K. Agarwal: Experimental investigations on the effect of liner surface properties on wear in non-firing engine simulator, SAE Technical Papers, 2004.
- A. Zavos and P. G. Nikolakopoulos: Int. J. Struct. Integr., 2015, 6(2), 300–324.
- C. S. Liu: Appl. Mech. Mater., 2014, 443, 141–144. doi:10.4028/www.scientific.net/AMM.443.141
- J. Zhan and M. Yang: Tribol. Trans., 2012, 55(5), 693–697.
- J. Zhan and M. Yang: Ind. Lubric. Tribol., 2014, 66(3), 387–392.
- J. Zhan and M. J. Yang: Lasers Eng., 2014, 29(1–2), 123–131.
- S. C. Vlǎdescu, S. Medina, A. V. Olver, I. G. Pegg, and T. Reddyhoff: Tribol. Lett., 2016, 62(2). Article 19, doi:10.1007/s11249-016-0669-8
- S. C. Vlădescu, A. V. Olver, I. G. Pegg and T. Reddyhoff: Wear, 2016, 358–359, 51–61.
- Y. Xu, Y. Peng, K. D. Dearn, T. You, J. Geng and X. Hu: Surf. Coat. Technol., 2017, 313, 391–401.
- B. Yin, B. Xu, H. Jia, H. Zhou, Y. Fu and X. Hua: Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 2017, 232(7), 871–881.
- S. Mezghani, I. Demirci, H. Zahouani and M. El Mansori: Precis. Eng., 2012, 36(2), 210–217.