References
- Choi, J. W., & Sul, S. K. (1995). A new compensation strategy reducing voltage/current distortion in PWM VSI systems operating with low output voltage. IEEE Transactions on Industry Applications, 31, 1001–1008.
- Choi, J. W., & Sul, S. K. (1996). Inverter output voltage synthesis using novel dead-time compensation. IEEE Transactions on Power Electronics, 11, 221–227.
- Franklin, G. F., Powell, J. D., & Emami-Naeini, A. (1986). Feedback control of dynamic systems. Reading, MA: Addison-Wesley.
- Hong K., & Nam, K. (1998). A load torque compensation scheme under the speed measurement delay. IEEE Transactions on Industrial Electronics, 45, 283–290.
- Iwasaki, M., & Matsui, N. (1993). Robust speed control of IM with torque feed-forward control. IEEE Transactions on Industrial Electronics, 40, 553–560.
- Jeong, S. G., & Park, M. H. (1991). The analysis and compensation of dead-time effects in PWM inverters. IEEE Transactions on Industrial Electronics, 38, 108–114.
- Kim, H. S., Moon, H. T., & Youn, M. J. (2003) . On-line dead-time compensation technique for open-loop PWM-VSI drives. The IEEE Transactions on Control Systems Technology, 11, 279–285.
- Kim, H. W., Youn, M. J., & Cho, K. Y. (2005) . New voltage distortion observer of PWM VSI for PMSM. IEEE Transactions on Industry Applications, 52, 1188–1192.
- Kim, K.-H. (2012). On-line estimation and compensation scheme for dead time and inverter nonlinearity independent of parameter variations in PMSM drive. International Journal of Electronics, 99, 1651–1674.
- Kim, S.-Y., & Park S.-Y. (2007). Compensation of dead-time effects based on adaptive harmonic filtering in the vector-controlled AC motor drives. IEEE Transactions on Industrial Electronics, 54, 1768–1777.
- Munoz-Garcia, A., & Lipo, T. A. (1998). On-line dead-time compensation technique for open-loop PWM-VSI drives. IEEE Transactions on Power Electronics, 14, 95–100.
- Murai, Y., Watanabe, T., & Iwasaki, H. (1987). Waveform distortion and correction circuit for PWM inverter with switching lag-times. IEEE Transactions on Industry Applications, 23, 881–886.
- Ohishi, K., Ohnishi, K., & Miyachi, K. (1988). Adaptive DC servo drive control taking force disturbance suppression into account. IEEE Transactions on Industry Applications, 24, 171–176.
- Sukegawa, T., Kamiyama, K., Mizuno, K., Matsui, T., & Okuyama, T. (1991). Fully digital, vector-controlled PWM VSI-fed ac drives with an inverter dead-time compensation strategy. IEEE Transactions on Industry Applications, 27, 552–559.
- Umeno, T., & Hori, Y. (1991). Robust speed control of DC servomotors using modern two degrees-of-freedom controller design. IEEE Transactions on Industrial Electronics, 38, 363–368.
- Umeno, T., Kaneko, T., & Hori, Y. (1993). Robust servosystem design with two degrees of freedom and its application to novel motion control of robot manipulators. IEEE Transactions on Industrial Electronics, 40, 473–485.