New hybrid active power filter for harmonic current suppression and reactive power compensation

References

• Abdusalam, M., Poure, P., Karimia, S., & Saadate, S. (2009). New digital reference current generation for shunt active power filter under distorted voltage conditions. Electric Power Systems Research, 79, 759–776. doi:10.1016/j.epsr.2008.10.009
   Web of Science ®Google Scholar
• Abdusalam, M., Poure, P., & Saadate, S. (2007). A new control scheme of hybrid active filter using self-tuning-filter. In International conference on power engineering, energy and electrical drives, POWERENG 2007 (pp.35–40). Portugal: IEEE. doi:10.1109/POWERENG.2007.4380095
   Google Scholar
• Abdusalam, M., Poure, P., & Saadate, S. (2008). Hardware implementation of a three-phase active filter system with harmonic isolation based on self-tuning-filter. In Power electronics specialists conference, PESC 2008. Rhodes: IEEE. doi:10.1109/PESC.2008.4592385
   Google Scholar
• Akagi, H. (1996). New trends in active filters for power conditioning. IEEE Transactions on Industry Applications, 32(6), 1312–1322. doi:10.1109/28.556633
   Web of Science ®Google Scholar
• Akagi, H. (2000). Active and hybrid filters for power conditioning. In Proceedings of the 2000 IEEE international symposium on industrial electronics, ISIE 2000 (pp.TU26–TU36). Puebla: IEEE. doi:10.1109/ISIE.2000.930470
   Google Scholar
• Akagi, H., Kanazawa, Y., & Nabae, A. (1984). Instantaneous reactive power compensators comprising switching devices without energy storage components. IEEE Transactions on Industry Applications, 20(3), 625–630. doi:10.1109/TIA.1984.4504460
   Web of Science ®Google Scholar
• Benchaita, L., Saadate, S., & Salem, A. (1999). A comparison of voltage source and current source shunt active filter by simulation and experimentation. IEEE Transactions on Power Systems, 14(2), 642–647. doi:10.1109/59.761892
   Web of Science ®Google Scholar
• Biricik, S. (2013). A novel hybrid active power filter topology for harmonic current suppression and reactive power compensation (PhD Thesis). Nicosia: Near East University.
   Google Scholar
• Biricik, S., & Ozerdem, O. C. (2010). Investigation of switched capacitors effect on harmonic distortion levels and performance analysis with active power filter. Journal of Electrical Review, Przeglad Elektrotechniczny, 11a(86), 13–17.
   Google Scholar
• Biricik, S., & Ozerdem, O. C. (2011). Harmonic distortion comparison of switched capacitors with active power filter for reactive power compensation. In EEEIC 9th international conference on environment and electrical engineering (pp. 269–272). Prague, Check Republic: IEEE. doi:10.1109/EEEIC.2010.5489949
   Google Scholar
• Biricik, S., Ozerdem, O. C., Redif, S., & Kmail, M. O. I. (2012). Novel hybrid active power filter structure to compensate harmonic currents and reactive power. In 16th IEEE Mediterranean Electrotechnical Conference, (pp. 597-601). Tunisia: IEEE. doi:10.1109/MELCON.2012.6196503.
   Google Scholar
• Biricik, S., Ozerdem, O. C., Redif, S., & Kmail., M. O. I. (2013). Performance improvement of active power filter under distorted and unbalanced grid voltage conditions. Journal of Electronics and Electrical Engineering (Elektronika Ir Elektrotechnika), 19(1), 35–39. http://dx.doi.org/10.5755/j01.eee.19.1.3247
   Web of Science ®Google Scholar
• Biricik, S., Redif, S., Ozerdem, O. C., Khadem, S. K., & Basu, M. (2014). Real-time control of shunt active power filter under distorted grid voltage and unbalanced load condition using self tuning filter. IET Power Electronics, 7(7), 1895–1905. doi:10.1049/iet-pel.2013.0924
   Web of Science ®Google Scholar
• Buso, S., Malesani, L., & Mattavelli, P. (1998). Comparison of current control techniques for active filter applications. IEEE Transactions on Industrial Electronics, 45(5), IEEE, 722–729. doi:10.1109/41.720328
   Web of Science ®Google Scholar
• Chatterjee, K., Fernandes, B. G., & Dubey, G. K. (1999). An instantaneous reactive volt-ampere compensator and harmonic suppressor system. IEEE Transactions on Power Electronics, 14(2), 381–392. doi:10.1109/63.750192
   Web of Science ®Google Scholar
• Chen, Q., Chenl, Z., & McCotmick, M. (2004). The application and optimization of C-type filter in a combined harmonic power filter. In 35th Annual IEEE power electronics specialists conference. (pp. 1041–1045). Aachen, Germany: IEEE. doi:10.1109/PESC.2004.1355564
   Google Scholar
• Fujita, H., & Akagi, H. (1991). Design strategy for the combined system of shunt passive and series active filters. In IEEE industry applications society annual meeting. (pp. 898–903). Dearborn, MI: IEEE, doi:10.1109/IAS.1991.178344
   Google Scholar
• Ghamri, A., Benchouia, M. T., & Golea, A. (2012). Sliding-mode control based three-phase shunt active power filter: Simulation and experimentation. Electric Power Components and Systems, 40(4), 383–398. doi:10.1080/15325008.2011.639127
   Web of Science ®Google Scholar
• Grady, W. M., & Santoso, S. (2001). Understanding power system harmonics. IEEE Power Engineering Review, 21(11), IEEE, 8–11. doi:10.1109/MPER.2001.961997
   Google Scholar
• Kale, M., & Özdemir, E. (2005). Harmonic and reactive power compensation with shunt active power filter under non-ideal mains voltage. Electric Power Systems Research, 74(3), 363–370. doi:10.1016/j.epsr.2004.10.014
   Web of Science ®Google Scholar
• Khadem, S. K., Basu, M., & Conlon, M. F. (2013). Harmonic power compensation capacity of shunt active power filter and its relationship with design parameters. IET Power Electronics, 7(2), 418–430. doi:10.1049/iet-pel.2013.0098
   Web of Science ®Google Scholar
• Moran, L. A., Dixon, J. W., & Wallace, R. R. (1995). A three-phase active power filter operating with fixed switching frequency for reactive power and current harmonic compensation. IEEE Transactions on Industrial Electronics, 42(4), 402–408. doi:10.1109/41.402480
   Web of Science ®Google Scholar
• Nassif, A. B., Wilsun, X., & Walmir, F. (2009). An investigation on the selection of filter topologies for passive filter applications. IEEE Transactions on Power Delivery, 24(3), 1710–1718. doi:10.1109/TPWRD.2009.2016824
   Web of Science ®Google Scholar
• Ozerdem, O. C., & Biricik, S. (2009). A research and solution proposal for reactive power problems in North Cyprus Industries. In 6th International conference on electrical and electronics engineering (ELECO 2009). (pp. I-85-I-87). Bursa, Turkey: IEEE.
   Google Scholar
• Rahmani, S., Hamadi, A. B., & Al-Haddad, K. (2012). A comprehensive analysis of hybrid active power filter for power quality enhancement. In 38th Annual Conference on IEEE Industrial Electronics Society (IECON 2012). (pp. 6258–6267). Montreal: IEEE.
   Google Scholar
• Singh, B. N. (2002). Implementation of a hybrid filter with a potential application to adjustable speed compressor drives for air quality control. Electric Power Components and Systems, 30(11), 1091–1126. doi:10.1080/15325000290085406
   Web of Science ®Google Scholar
• Singh, B., Al-Haddad, K., & Chandra, A. (1999). A review of active filters for power quality improvement. IEEE Transactions on Industrial Electronics, 46(5), 960–971, IEEE. doi:10.1109/41.793345
   Web of Science ®Google Scholar
• Singh, G. K., Singh, A. K., & Mitra, R. (2007). A simple fuzzy logic based robust active power filter for harmonics minimization under random load variation. Electric Power Systems Research, 77(8), 1101–1111. doi:10.1016/j.epsr.2006.09.006
   Web of Science ®Google Scholar
• Ucar, M., & Ozdemir, E. (2008). Control of a 3-phase 4-leg active power filter under non-ideal mains voltage condition. Electric Power Systems Research, 78(1), 58-73. doi:10.1016/j.epsr.2006.12.008
   Web of Science ®Google Scholar
• Venkatesh, C., Sarma, D. V. S. S., & Sydulu, M. (2009). S-transform-based hybrid active filter for mitigation of current harmonics. Electric Power Components and Systems, 37(12), 1305–1320. doi:10.1080/15325000903054977
   Web of Science ®Google Scholar
• Wildi, T. (2006). Electrical machines, drives, and power systems. Upper Saddle River, NJ: Prentice Hall.
   Google Scholar
• Yacamini, R. (1995). Power system harmonics. Part 3: Problems caused by distorted supplies. IET Power Engineering Journal, 9(5), 233–238. doi:10.1049/pe:19950507
   Web of Science ®Google Scholar