115
Views
16
CrossRef citations to date
0
Altmetric
Original Articles

Recovery of nano-calcium fluoride and ammonium bisulphate from phosphogypsum waste

ORCID Icon, ORCID Icon & ORCID Icon

References

  • Saadaoui, E., Ghazel, N., Ben Romdhane, C., and Massoudi, N., 2017, Phosphogypsum: Potential uses and problems–a review. International Journal of Environmental Studies 74(4), 558–567. doi: 10.1080/00207233.2017.1330582.
  • Lu, S.Q., Lan, P.Q., and Wu, S.F., 2016, Preparation of nano-CaCO3 from phosphogypsum by gas–liquid–solid reaction for CO2 sorption. Industrial & Engineering Chemistry Research 55(38), 10172–10177. doi: 10.1021/acs.iecr.6b02551.
  • Ghazel, N., Saadaoui, E., Ben Romdhane, C., Abbès, N., Grira, M., Abdelkebir, S., Aydi, S., Abdallah, L., and Mars, M., 2018, Assessment of phosphogypsum use in a nursery for plant propagation. International Journal of Environmental Studies 75(2), 284–293. doi: 10.1080/00207233.2017.1356631.
  • Martin, D.F., Dooris, P.M., and Sumpter, D., 2001, Environmental impacts of phosphogypsum vs. borrow pits in roadfill construction. Journal of Environmental Science and Health, Part A 36(10), 1975–1982. doi: 10.1081/ESE-100107441.
  • Ennaciri, Y., Zdah, I., El Alaoui-Belghiti, H., and Bettach, M., 2019, Characterization and purification of waste phosphogypsum to make it suitable for use in the plaster and the cement industry. Chemical Engineering Communications 207(3), 382–392. doi: 10.1080/00986445.2019.1599865.
  • Ilić, M., Miletić, S., and Munitlak, R., 1999, Utilization of the waste phosphogypsum for the Portland cement clinker production. Toxicological & Environmental Chemistry 69(1–2), 201–207. doi: 10.1080/02772249909358701.
  • Ennaciri, Y., Mouahid, F.E., Bendriss, A., and Bettach, M., 2013, Conversion of phosphogypsum to potassium sulfate and calcium carbonate in aqueous solution. MATEC Web of Conferences 5, 04006. doi: 10.1051/matecconf/20130504006.
  • Contreras, M., Pérez-López, R., Gázquez, M.J., Morales-Flórez, V., Santos, A., Esquivias, L., and Bolívar, J.P., 2015, Fractionation and fluxes of metals and radionuclides during the recycling process of phosphogypsum wastes applied to mineral CO2 sequestration. Waste Management 45, 412–419. doi: 10.1016/j.wasman.2015.06.046.
  • Ennaciri, Y., Bettach, M., Cherrat, A., and Zegzouti, A., 2016, Conversion of phosphogypsum to sodium sulfate and calcium carbonate in aqueous solution. Journal of Materials and Environmental Science 7(6), 1925–1933.
  • Burnett, W.C., Schultz, M.K., and Hull, C.D., 1996, Radionuclide flow during the conversion of phosphogypsum to ammonium sulfate. Journal of Environmental Radioactivity 32(1–2), 33–51. doi: 10.1016/0265-931X(95)00078-O.
  • Mohr, A.C., Obrecht, R.P., Campbell, R.G., and Messenger, A.L., 1966, U.S. Patent N° 3,257,167 (Washington, DC: U.S. Patent and Trademark Office).
  • Lailach, G., Bulan, A., and Buss, G., 2001, U.S. Patent N°. 6,251,358 (Washington, DC: U.S. Patent and Trademark Office).
  • Zinke, R.K. and Werkheiser, W.H., 2018, Mineral Commodity Summaries 2018 (Reston: US Geological Survey).
  • Samrane, K., Al-hjouj, M., Doudin, F., and Kossir, A., 2011, Fluosilicic acid: recovery system and aluminium fluoride production. Arab Fertilizer Association Publication 11, 1–20.
  • European Commission, 2007, Reference document on best available techniques for the manufacture of large volume inorganic chemicals – ammonia, acids and fertilisers. Official Journal of the European Union C 202/2, 257–282.
  • Gouider, M., Feki, M., and Sayadi, S., 2009, Separative recovery with lime of phosphate and fluoride from an acidic effluent containing H3PO4, HF and/or H2SiF6. Journal of Hazardous Materials 170(2–3), 962–968. doi: 10.1016/j.jhazmat.2009.05.067.
  • Matta, S., Stephan, K., Stephan, J., Lteif, R., Goutaudier, C., and Saab, J., 2017, Phosphoric acid production by attacking phosphate rock with recycled hexafluosilicic acid. International Journal of Mineral Processing 161, 21–27. doi: 10.1016/j.minpro.2017.02.008.
  • Górecki, H.J., 1994, Utilization of fluorine from phosphate fertilizer plants. In: C.A. Hodge (Ed.) Pollution Control in Fertilizer Production (New York: CRC Press), pp. 299–335.
  • Kowalski, Z. and Paszek, A., 1999, Production of synthetic fluorspar from waste calcium fluoride slurry. Polish Journal of Environmental Studies 8, 125–128.
  • Rezvani, M. and Farahinia, L., 2015, Structure and optical band gap study of transparent oxyfluoride glass-ceramics containing CaF2 nanocrystals. Materials & Design 88, 252–257. doi: 10.1016/j.matdes.2015.08.159.
  • Zhou, L.S., Ming, D.Z., Li, Z.X., and Li, H.P., 2013, The mechanism of thermal decomposition for ammonium sulfate and ammonium bisulfate via addition of ferric oxide. In: J.C.M. Kao, W.P. Sung, and R. Chen (Eds) Advanced Materials Research (Stafa-Zurich: Trans Tech Publications Ltd), pp. 68–71.
  • Apodaca, L., 2016, US geological survey minerals yearbook: nitrogen (Advance release). US Geological Survey.
  • Almeida, R.M. and Pantano, C.G., 1990, Structural investigation of silica gel films by infrared spectroscopy. Journal of Applied Physics 68(8), 4225–4232. doi: 10.1063/1.346213.
  • Boer, G.J., Sokolik, I.N., and Martin, S.T., 2007, Infrared optical constants of aqueous sulfate–nitrate–ammonium multi-component tropospheric aerosols from attenuated total reflectance measurements-Part I: results and analysis of spectral absorbing features. Journal of Quantitative Spectroscopy and Radiative Transfer 108(1), 17–38. doi: 10.1016/j.jqsrt.2007.02.017.
  • Krost, K.J. and McClenny, W.A., 1994, FT-IR transmission spectroscopy for quantitation of ammonium bisulfate in fine-particulate matter collected on Teflon® filters. Applied\Spectroscopy 48(6), 702–705.
  • Gopalan, R., 2009, Inorganic chemistry for undergraduates, Universities Press (Hyderabad: Universities Press (India) Private Limited).
  • Liske, Y., Kapila, S., Flanigan, V., Nam, P., and Lorbert, S., 1999, Evaluation of combustion processes for production of feedstock chemicals from ammonium sulfate and ammonium bisulfate. Journal of Hazardous Substance Research 2(1), 8–17. doi: 10.4148/1090-7025.1018.
  • Zhou, L., 2018, Preparation of calcium fluoride using phosphogypsum by orthogonal experiment. Open Chemistry 16(1), 864–868. doi: 10.1515/chem-2018-0093.
  • Ennaciri, Y. and Bettach, M., 2018, Procedure to convert phosphogypsum waste into valuable products. Materials and Manufacturing Processes 33(16), 1727–1733. doi: 10.1080/10426914.2018.1476763.
  • Ennaciri, Y., El Alaoui-Belghiti, H., and Bettach, M., 2019, Comparative study of K2SO4 production by wet conversion from phosphogypsum and synthetic gypsum. Journal of Materials Research and Technology 8(3), 2586–2596. doi: 10.1016/j.jmrt.2019.02.013.
  • Lamzougui, G., Nafai, H., Bouhaouss, A., and Bchitou, R., 2016, Determination of the maximum content of heavy metals in the phosphogypsum. Journal of Materials and Environmental Science 7(6), 2161–2169.
  • Macías, F., Pérez-López, R., Cánovas, C.R., Carrero, S., and Cruz-Hernandez, P., 2017, Environmental assessment and management of phosphogypsum according to European and United States of America regulations. Procedia Earth and Planetary Science 17, 666–669. doi: 10.1016/j.proeps.2016.12.178.
  • Azouazi, M., Ouahidi, Y., Fakhi, S., Andres, Y., Abbe, J.C., and Benmansour, M., 2001, Natural radioactivity in phosphates, phosphogypsum and natural waters in Morocco. Journal of Environmental Radioactivity 54(2), 231–242. doi: 10.1016/S0265-931X(00)00153-3.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.