Experimental and numerical analysis of a tribo-electrostatic separation process of micronized plastic particles using rotating disk electrodes

References

• Brett-Crowther, M.R., 2010, Review, climate change: the science, impacts and solutions. International Journal of Environmental Studies 67(2), 268–269. doi:10.1080/00207231003588888
   Google Scholar
• Bendimerad, S., Tilmatine, A., Ziane, M., and Dascalescu, L., 2009, Plastic wastes recovery using free-fall triboelectric separator. International Journal of Environmental Studies 66(5), 529–538. doi:10.1080/00207230902722838
   Google Scholar
• Mahi, I., Messafeur, R., Belgacem, A., Bellebna, Y., Louati, H., and Tilmatine, A., 2018, New separation method of metal/plastic micronized particles using travelling wave conveyors. International Journal of Environmental Studies 75(5), 788–799. doi:10.1080/00207233.2018.1433917
   Google Scholar
• Tilmatine, A. and Dascalescu, L., 2010, Set-point identification of a free-fall triboelectrostatic separation process for plastic particles. International Journal of Environmental Studies 67(1), 27–40. doi:10.1080/00207230902883960
   Google Scholar
• Tilmatine, A., Bendimerad, S., Boukhoulda, F., Medles, K., and Dascalescu, L., 2009, Electrostatic separators of particles. Application to plastic/metal, metal/metal and plastic/plastic mixtures. Waste Management 29(1), 228–232. doi:10.1016/j.wasman.2008.06.008
   PubMed Web of Science ®Google Scholar
• Dascalescu, L., Samuila, A., Mihalcioiu, A., Bente, S., and Tilmatine, A., 2005, Robust design of electrostatic separation processes. IEEE Transactions on Industry Applications 41(3), 715–720. doi:10.1109/TIA.2005.847308
   Web of Science ®Google Scholar
• Mazuda, S., Toragushi, M., Takahashi, T., and Haga, K., 1983, Electrostatic beneficiation of coal, using a cyclone-tribocharger. IEEE Transactions on Industry Applications 19(5), 789–793. doi:10.1109/TIA.1983.4504289
   Web of Science ®Google Scholar
• Kelly, E.G. and Spottiswood, D.J., 1989, The theory of electrostatic separations: A review, Part I. Fundamentals. Minerals Engineering 2(1), 33–46. doi:10.1016/0892-6875(89)90063-0
   Web of Science ®Google Scholar
• Nagatomo, H., 2004, Design-for-recycling of household appliances using a simple design-for-disassembly method. Mitsubishi Electric Advance 96, 22–24.
   Google Scholar
• Ongondo, F.O., Williams, I.D., and Cherrett, T.J., 2011, How are WEEE doing? A global review of the management of electrical and electronic wastes. Waste Management 31, 714–730. doi:10.1016/j.wasman.2010.10.023
   PubMed Web of Science ®Google Scholar
• Kang, H.Y. and Schoenung, J.M., 2005, Electronic waste recycling: A review of U.S. infrastructure and technology options. Resources, Conservation and Recycling 45, 368–400. doi:10.1016/j.resconrec.2005.06.001
   Web of Science ®Google Scholar
• Aizawa, H., Yoshida, H., and Sakai, S., 2008, Current results and future perspectives for Japanese recycling of home electrical appliances. Resources, Conservation and Recycling 52, 1399–1410. doi:10.1016/j.resconrec.2008.07.013
   Web of Science ®Google Scholar
• Li, J. and Xu, Z.M., 2010, Environmental-friendly automatic line for recovering metal from waste printed circuit boards. Environmental Science and Technology 44, 1418–1423. doi:10.1021/es903242t
   PubMed Web of Science ®Google Scholar
• Li, J., Lu, H.Z., Guo, J., Xu, Z.M., and Zhou, Y.H., 2007, Recycle technology for recovering resources and products from waste printed circuit boards. Environmental Science and Technology 41, 1995–2000. doi:10.1021/es0618245
   PubMed Web of Science ®Google Scholar
• Li, J., Lu, H., Liu, S., and Xu, Z., 2008, Optimizing the operating parameters of corona electrostatic separation for recycling waste scraped printed circuit boards by computer simulation of electric field. Journal of Hazardous Materials 153(1–2), 269–275. doi:10.1016/j.jhazmat.2007.08.047
   PubMed Web of Science ®Google Scholar
• Miloudi, M., Medles, K., Tilmatine, A., Brahami, M., and Dascalescu, L., 2011, Optimisation of belt-type electrostatic separation of granular plastic mixtures tribocharged in a propeller-type device. Journal of Physics: Conference Series, 301(1), 012067. Presented at 13th international conference of electrostatics, Bangor, Wales, UK, 10–14 April.
   Google Scholar
• Lungu, M., 2004, Electrical separation of plastic materials using the triboelectric effect. Minerals Engineering 17, 69–75. doi:10.1016/j.mineng.2003.10.010
   Web of Science ®Google Scholar
• Miloudi, M., Medles, K., Tilmatine, A., Brahami, M., and Dascalescu, L., 2011, Modeling and optimization of a propeller-type tribocharger for granular materials. Journal of Electrostatics l(69), 631–637. doi:10.1016/j.elstat.2011.08.010
   Google Scholar
• Buda, G., Samuila, A., Atroune, S., Bilici, M., and Dascalescu, L., 2013, Set point identification of a tribocharging process for mixed granular solids. Journal of Electrostatics 71, 407–412. doi:10.1016/j.elstat.2012.11.026
   Web of Science ®Google Scholar
• Tilmatine, A., Medles, K., Younes, M., Bendaoud, A., and Dascalescu, L., 2010, Roll-type versus free-fall electrostatic separation of tribocharged plastic particles. IEEE Transactions on Industry Applications 46(4), 1564–1569. doi:10.1109/TIA.2010.2049553
   Web of Science ®Google Scholar
• Park, C.H., Jeon, H.S., and Park, J.K., 2007, PVC removal from mixed plastics by triboelectrostatic separation. Journal of Hazardous Materials 144(1–2), 470–476. doi:10.1016/j.jhazmat.2006.10.060
   PubMed Web of Science ®Google Scholar
• Fekir, D.E., Miloudi, M., Miloua, F., Medles, K., and Dascalescu, L., 2017, New propeller-type tribocharging device with application to the electrostatic separation of granular insulating materials. IEEE Transactions on Industry Applications 53(3), 2416–2422. doi:10.1109/TIA.2017.2647802
   Web of Science ®Google Scholar
• Calin, L., Mihalcioiu, A., Iuga, A., and Dascalescu, L., 2007, Fluidized bed device for plastic granules triboelectrification. Particulate Science and Technology 25, 205–211. doi:10.1080/02726350701257782
   Web of Science ®Google Scholar
• Pearse, M.J. and Hickey, T.J., 1978, The separation of mixed plastics using a dry triboelectric technique. Resources Conservation and Recycling 3, 179–190.
   Web of Science ®Google Scholar
• Yanar, D.K. and Kwetkus, B.A., 1995, Electrostatic separation of polymer powders. Journal of Electrostatics 35, 257–266. doi:10.1016/0304-3886(94)00044-W
   Web of Science ®Google Scholar
• Inculet, I.I., Castle, G.S.P., and Brown, J.D., 1998, Electrostatic separation of plastics for recycling. Particulate Science and Technology: An International Journal 16, 91–100.
   Web of Science ®Google Scholar
• Benhafssa, A.M., Zeghloul, T., Aksa, W., Medles, K., and Dascalescu, L., 2018, Continuous operation of a fluidized-bed disk-type electrostatic separator for micronized plastic waste. Waste Management 79, 763–769. doi:10.1016/j.wasman.2018.08.044
   PubMed Web of Science ®Google Scholar
• Zeghloul, T., Benhafssa, A.M., Richard, G., Medles, K., and Dascalescu, L., 2017, Effect of particle size on the tribo-aero-electrostatic separation of plastics. Journal of Electrostatics 88, 24–28. doi:10.1016/j.elstat.2016.12.003
   Web of Science ®Google Scholar
• Bouhamri, N., Zelmat, M.E., and Tilmatine, A., 2019, Micronized plastic waste recycling using two-disc tribo-electrostatic separation process. Advanced Powder Technology 30(3), 625–631. doi:10.1016/j.apt.2018.12.012
   Web of Science ®Google Scholar