- ANDERSSON , H. , AXSÄTER , S. and JÖNSSON , H. 1981 . Hierarchical material requirements planning . International Journal of Production Research , 19 : 45 – 57 .
- BECHTE , W. 1988 . Theory and practice of load-oriented manufacturing control . International Journal of Production Research , 26 : 375 – 395 .
- BERGAMASCHI , D. , CIGOLINI , R. , PERONA , M. and PORTOLI , A. 1997 . Order review and release strategies in a job shop environment a review and a classification . International Journal of Production Research , 35 : 399
- BERTRAND , J. W. M. and VAN OOIJEN , H. P. G. 1996 . Integrating material coordination and capacity load smoothing in multi-product multi-phase production systems . International Journal of Production Economics , 46-47 : 1 – 12 .
- BERTRAND , J. W. M. , WORTMANN , J. C. and WIJNGAARD , J. 1990 . Production Control: A Structural and Design Oriented Approach , Amsterdam : Elsevier .
- BITRAN , G. R. , HAAS , E. A. and HAX , A. C. 1982 . Hierarchical production planning: a two-stage system . Operations Research , 30 : 232 – 251 .
- CHEN , H. and MANDELBAUM , A. 1994 . “ Hierarchical modeling of stochastic networks, Part I: Fluid models ” . In Stochastic Modeling and Analysis of Manufacturing Systems , Edited by: Yao , D. D. 47 – 105 . New York : Springer .
- DE KOK , A. G. 1989 . A moment-iteration method for approximating the waiting-time characteristics of the GI/G/1 queue . Probability in the Engineering and Information Sciences , 3 : 273 – 287 .
- ERDLENBRUCH , B. 1984 . Grundlagen neuer Auftragssteuerungsverfahren für die Werkstattfertigung , Düsseldorf : VDI-Z Reihe 2 No. 71 .
- ERDLENBRUCH , B. 1986 . “ Aufbau eines Fertigungssteuerungssystens zur Kapazitäts-, Durchlaufzeit-und Bestandsplanung ” . In Praxis der belastungsor-ientierten Fertigungssteuerung , Edited by: Wiendahl , H.-P. 181 – 195 . Hannover : IFA .
- FINE , C. H. and GRAVES , S. C. 1989 . A tactical planning model for manufacturing subcomponents of mainframe computers . Journal of Manufacturing and Operations Management , 2 : 4 – 34 .
- FORRESTER , J. W. 1961 . Industrial Dynamics , Cambridge, MA : MIT Press .
- FREDENDALL , L. D. and MELNYK , S. A. 1995 . Assessing the impact of reducing demand variance through improved planning on the performance of a dual resource constrained job shop . International Journal of Production Research , 33 : 1521 – 1534 .
- GRAVES , S. C. 1986 . A tactical planning model for a job shop . Operations Research , 34 : 522 – 533 .
- HASAN , C. N. and SPEARMAN , M. L. 1999 . Optimal material release times in stochastic production environments . International Journal of Production Research , 37 : 1201 – 1216 .
- HAX , A. C. and MEAL , H. C. 1975 . “ Hierarchical integration of production planning and scheduling ” . In Logistics: TMS Studies in the Management Sciences , Edited by: Geister , M. A. 53 – 69 . Amsterdam : North-Holland .
- HOMEM-DE-MELLO , T. , SHAPIRO , A. and SPEARMAN , M. L. 1999 . Finding optimal material release times using simulation-based optimization . Management Science , 45 : 86 – 102 .
- KARMARKAR , U. S. 1989 . Capacity loading and release planning with work-in-progress (WIP) and leadtimes . Journal of Manufacturing and Operations Management , 2 : 105 – 123 .
- KARMARKAR , U. S. 1993 . “ Manufacturing lead times, order release and capacity loading ” . In Logistics of Production and Inventory: Handbooks in OR & MS , Edited by: Graves , S. C. , Rinnoy Kan , A. H. G. and Zipkin , P. H. vol. 4 , 287 – 329 . Amsterdam : North-Holland .
- KLEINROCK , L. 1976 . Queueing Systems, Vol. II: Computer System Applications , Vol. II , New York : Wiley .
- LEE , H. L. and BILLINGTON , C. 1995 . The evolution of supply-chain-management models and practice at Hewlett-Packard . Interfaces , 25 : 42 – 63 .
- LIN , L. and COCHRAN , J. K. 1990 . Metamodels of production line transient behaviour for sudden machine breakdowns . International Journal of Production Research , 28 : 1791 – 1806 .
- LIN , G. , ETTL , M. , BUCKLEY , S. , BAGCHI , S. , YAO , D. , NACCARATO , B. L. , ALLAN , R. , KIM , K. and KOENIG , L. 2000 . Extended-enterprise supply-chain-management at IBM Personal Systems Group and other divisions . Interfaces , 30 : 7 – 25 .
- MISSBAUER , H. 1991 . Bestimmung veränderlicher Parameter der belastungsorientierten Auftragsfreigabe mit Hilfe eines aggregjerten Grobplanungsmodells , Working Paper 3/91 University of Linz, Institute of Industry and Production Management .
- MISSBAUER , H. 1997 . Order release and sequence-dependent setup times . International Journal of Production Economics , 49 : 131 – 143 .
- MISSBAUER , H. 1998 . Bestandsregelung als Basis für eine Neugestaltung von PPS-Systemen , Heidelberg : Physica .
- MISSBAUER , H. Models of production units for planning the aggregate material flow . Paper to be presented at the 11th International Working Seminar on Production Economics . IgIs.
- ODONI , A. R. and ROTH , E. 1983 . An empirical investigation of the transient behavior of stationary queueing systems . Operations Research , 31 : 432 – 455 .
- PARRISH , S. H. 1987 . Extensions to a model for tactical planning in a job shop environment , Operations Research Centre, MIT . SM thesis,
- PERONA , M. and PORTIOLI , A. 1998 . The impact of parameters setting in load oriented manufacturing control . International Journal of Production Economics , 55 : 133 – 142 .
- PHILIPOOM , R. R. and FRY , T. D. 1992 . Capacity based order review/release strategies to improve manufacturing performance . International Journal of Production Research , 30 : 2559 – 2572 .
- SPOLSKI , E. W. 1967 . Atomphysik II Berlin
- STADTLER , H. 2000 . “ Supply chain management--an overview ” . In Supply Chain Management and Advanced Planning , Edited by: Stadtler , H. and Kilger , C. 7 – 28 . Berlin : Springer .
- STAHLMAN , E. J. and COCHRAN , J. K. 1998 . Dynamic metamodelling in capacity planning . International Journal of Production Research , 36 : 197 – 209 .
- STOOP , P. P. M. 1996 . “ Performance management in manufacturing ” . TU Eindhoven . Thesis,
- TATSIOPOULOS , I. P. and KINGSMAN , B. G. 1983 . Lead time management . European Journal of Operational Research , 14 : 351 – 358 .
- VERNADAT , F. and XIE , X.-L. 2001 . Guest Editorial: Modelling specification and analysis of manufacturing systems . International Journal of Production Research , 39 : 159 – 162 .
- WESTON , R. H. , CLEMENTS , P. E. , SHORTER , D. N. , CARROTT , A. J. , HODGSON , A. and WEST , A. A. 2001 . On the explicit modelling of systems of human resources . International Journal of Production Research , 39 : 185 – 204 .
- WIENDAHL , H.-P. 1995 . Load-Oriented Manufacturing Control , Berlin : Springer .
- WIENDAHL , H.-P. 1997 . Fertigungsregelung , Munich : Hanser .
- YU , B. and POPPLEWELL , K. 1994 . Metamodels in manufacturing a review . International Journal of Production Research , 32 : 787 – 796 .
- ZAPFEL , G. 1991 . Modell einer Grobplanung und ihr Zusammenhang zur belastungsorientierten Auftragsfreigabe , Working Paper 1/91 University of Linz, Institute of Industry and Production Management .
- ZAPFEL , G. and MISSBAUER , H. 1993a . Production planning and control systems including load-oriented order release-problems and research perspectives . International Journal of Production Economics , 30-31 : 107 – 122 .
- ZAPFEL , G. and MISSBAUER , H. 1993b . New concepts for production planning and control . European Journal of Operational Research , 67 : 297 – 320 .
- ZUM , W. H. M. 2000 . Towards intelligent manufacturing planning and control systems . OR Spektrum , 22 : 313 – 345 .
- ZWICKER , E. 1980 . System dynamics in inventory and production planning . OR Spektrum , 1 : 143 – 168 .
- ZWICKER , E. 1981 . Simulation und Analyse dynamischer Systeme , Berlin : de Gruyter .
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.