- ARCHIBALD , I. and BRADLEY , Q . Manufacturing applications for a triangular surface mesh generated from 3D digitized data . SPIE International Symposium on Intelligent Systems and Advanced Manufacturing . Vol. 3204 , Pittsburgh, PA
- AUSTIN , S. P. , JERARD , R. B. and DRYSDALE , R. L. 1997 . Comparison of discretization algorithms for NURBS surfaces with application to numerically controlled machining . Computer-Aided Design , 29 (1) : 71 – 83 .
- BALASUBRAMANIAM , M. , LAXMIPRASAD , P. , SARMA , S. and SHAIKH , Z. 2000 . Generating 5-axis NC roughing paths directly from a tessellated representation . Computer-Aided Design , 32 (4) : 261 – 277 .
- CHOI , B. K. 1991 . Surface modelling for CAD/CAM , New York : Elsevier .
- CHOI , B. K. and JERARD , R. B. 1999 . Sculptured Surface Machining , Boston, MA : Kluwer Academic .
- CHOI , B. K. , KIM , D. and JERARD , R. B. 1997 . C-space approach to tool-path generation for die and mould machining . Computer-Aided Design , 29 (9) : 657 – 669 .
- CHOI , B. K. , PARK , J. W. and JUN , Q S. 1993 . Cutter-location data optimisation in 5-axis surface machining . Computer-Aided Design , 25 (6) : 377 – 386 .
- ELBER , G. and COHEN , E. 1999 . A unified approach to verification in 5-axis freeform milling environments . Computer-Aided Design , 31 (11) : 795 – 804 .
- GAN , J. G. 1992 . Set-up orientations of workpieces for machining by three-axis numerical control machines . Journal of Design and Manufacturing , 2 : 59 – 69 .
- KANG , J. K. and SUH , S. H. 1997 . Machinability and set-up orientation for 5-axis numerically machining of free surfaces . International Journal of Advanced Manufacturing Technology , 13 : 311 – 325 .
- LEE , Y. S. and CHANG , T.C. 1995 . 2-phase approach to global tool interference avoidance in 5-axis machining . Computer-Aided Design , 27 (10) : 715 – 729 .
- LEE , Y. S. and CHANG , J. C. 1996 . Machined surface error analysis for 5-axis machining . International Journal of Production Research , 34 (1) : 111 – 135 .
- Li , S. X. and JERARD , R. B. 1994 . 5-axis machining of sculptured surface with a flat-end cutter . Computer-Aided Design , 26 (3) : 165 – 178 .
- MARSHALL , S. and GRIFFITHS , J. G. 1994 . A new cutter-path topology for milling machines . Computer-Aided Design , 26 (3) : 204 – 214 .
- MILROY , M. , WEIR , D. J. , BRADLEY , C. and VICKERS , Q. w. 1996 . Reverse engineering employing a 3-D laser scanner a case study . The International Journal of Advanced Manufacturing Technology , 12 : 111 – 121 .
- MORISHIGE , K. , KASE , K. and TAKEUSHI , Y. 1997 . Collision-free tool path generation using 2-dimensional C-space for 5-axis control machining . International Journal of Advanced Manufacturing Technology , 13 : 393 – 400 .
- MORISHIGE , K. and TAKEUSHI , Y. 5-axis control rough cutting of an impeller with efficiency and accuracy . Proceedings of the 1997 IEEE International Conference on Robotics and Automation . pp. 1241 – 1246 .
- PIEGL , L. and TILLER , W. 1995 . The NURBS Book , Springer-Verlag .
- SARMA , R. and DUTTA , D. 1997 . The geometry and generation of NC tool paths . Journal of Mechanical Design , 119 (6) : 253 – 258 .
- SUH , S. H. and KANG , J. K. 1995 . Process planning for multi-axis NC machining of free surfaces . International Journal of Production Research , 33 (10) : 2723 – 2738 .
- SUH , Y. S. and LEE , K. 1990 . NC milling tool path generation for arbitrary pockets defined by sculptured surfaces . Computer-Aided Design , 22 (5) : 273 – 284 .
- SUN , W. , BRADLEY , C. , ZHANG , Y. F. and LOH , H. T. 2001 . Cloud data modelling employing a unified, non-redundant triangular mesh . Computer-Aided Design , 33 : 183 – 193 .
- VICKERS , G. W. and BRADLEY , Q . 1992 . Curved surface machining through circular arc interpolation . Computers in Industry , 19 (3) : 329 – 337 .
- Woo , T. C. 1994 . Visibility maps and spherical algorithms . Computer-Aided Design , 26 (1) : 6 – 16 .
Tool-path generation for five-axis machining of free-form surfaces based on accessibility analysis
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.