Haptic modeling for a virtual coordinate measuring machine

References

• Balasubramaniam , M , Ho , S , Sarma , S and Adachi , Y . 2002 . Generation of collision-free 5-axis tool paths using a haptic surface . Comput.-Aided Design , 34 : 267 – 279 .
   Web of Science ®Google Scholar
• Beg , J and Shunmugam , MS . 2003 . Application of fuzzy logic in the selection of part orientation and probe orientation sequencing for prismatic parts . Int. J Prod. Res. , 41 : 2799 – 2815 .
   Web of Science ®Google Scholar
• Chen E Six degree-of-freedom haptic system for desktop virtual prototyping applications Proceedings of the First International Workshop on Virtual Reality and Prototyping, Laval, France 1999 pp. 97–106
   Google Scholar
• Cheng Y Wang BC Shinshi T Shimokohbe A Virtual-CMM for fast probing using FEM approach Proceedings of the 15th IMEKO Work Congress, Osaka, Japan 1999 pp. 107–114
   Google Scholar
• Durlach NI Mavor AS Virtual Reality: Scientific and Technological Challenges 1995 National Academy Press Washington DC
   Google Scholar
• ElMaraghy , H and Gu , P . 1987 . Expert system for inspection planning . Ann. CIRP , 36 : 85 – 89 .
   Google Scholar
• Gutierrez T Barabero JI Aizpitarte M Cariilo AR Eguidazu A Assembly simulation through haptic virtual prototypes Proceedings of the 3rd Phantom Users Group Workshop, Dedham, MA, USA 1998
   Google Scholar
• Lu CG Morton D Myler P Wu MH Artificial intelligent (AI) inspection path management for multiple tasks measurement on co-ordinate measuring machine (CMM): an application of neural network technology Proceedings of the 1995 IEEE Annual International Engineering Management Conference, Singapore 1995 pp. 353–357
   Google Scholar
• Lu , CG , Morton , D , Wu , MH and Myler , P . 1999 . Genetic algorithm modelling and solution of inspection path planning on a coordinate measuring machine (CMM) . Int. J. Adv. Manuf. Technol. , 15 : 409 – 416 .
   Web of Science ®Google Scholar
• Medeiros , DJ , Thomas , G , Ratkus , AB and Cannon , D . 1994 . Off-line programming of coordinate measuring machines using a hand-held stylus . J. Manuf. Syst. , 13 : 401 – 411 .
   Web of Science ®Google Scholar
• Menq , CH , Yau , HT and Wong , CL . 1992 . An intelligent planning environment for automated dimensional inspection using coordinate measuring machines . J. Eng. Ind., Trans., ASME , 114 : 222 – 230 .
   Web of Science ®Google Scholar
• Pahk , HJ , Burdekin , M and Peggs , GN . 1998 . Development of virtual coordinate measuring machines incorporating probe errors . Proceedings of the Institution of Mechanical Engineers, Part B: J. Eng. Manuf. , 212 : 533 – 548 .
   Web of Science ®Google Scholar
• Pavlik P Zeiler W Reliable parts programming through PC simulation of CMM runs The Magazine of Carl Zeiss, Special Edition: Innovation 2001 20 21
   Google Scholar
• Roy , U , Xu , Y and Wang , L . 1994 . Development of an intelligent inspection planning system in an object oriented programming environment . Comput. Integ. Manuf. Syst. , 7 : 240 – 246 .
   Web of Science ®Google Scholar
• SensAble 2003 Available online at:, http://www.sensable.com/
   Google Scholar
• Van Dorp , B , Haitjema , H , Delbressine , F , Bergmans , R and Schellekens , P . 2001 . Virtual CMM using Monte Carlo methods based on frequency content of the error signal . Proceedings of SPIE , 4401 : 158 – 167 .
   Google Scholar
• VMS Lab 2003 Available online at:, http://bezier.kaist.ac.kr/products/vfs.htm
   Google Scholar
• Yau , HT and Menq , CH . 1995 . Automated CMM path planning for dimensional inspection of dies and molds having complex surfaces . Int. J. Mach. Tools Manuf. , 35 : 861 – 876 .
   Web of Science ®Google Scholar
• Zhang , SG , Ajmal , A , Wootton , J and Chisholm , A . 2000 . Feature-based inspection process planning system for co-ordinate measuring machine (CMM) . J. Mater. Proc. Technol. , 107 : 111 – 118 .
   Web of Science ®Google Scholar