References
- Albers, W. 2011. “Control Charts for Health Care Monitoring under Overdispersion.” Metrika 74: 67–83.10.1007/s00184-009-0290-z
- Bounds, G. M. 1988. “Success in Implementing Statistical Process Control as a Function of Contextual Variables in 20 Manufacturing Organizations.” PhD diss., University of Tennessee at Knoxville, TN.
- Bourke, P. D. 1991. “Detecting a Shift in Fraction Nonconforming Using Run-length Control Charts with 100% Inspection.” Journal of Quality Technology 23: 225–238.
- Bourke, P. D. 2001. “Sample Size and the Binomial CUSUM Control Chart: The Case of 100% Inspection.” Metrika 53: 51–70.10.1007/PL00003986
- British Standard Institution. 1985. Quality Management Systems: Quality Control. Vol. 24 of BSI Handbook. London: British Standard Institution.
- Cannon, J., P. A. Krokhmal, Y. Chen, and R. Murphey. 2012. “Detection of Temporal Changes in Psychophysiological Data Using Statistical Process Control Methods.” Computer Methods and Programs in Biomedicine 107: 367–381.10.1016/j.cmpb.2011.01.003
- Castillo, E. D. 1995. “Relations Between X-bar Control Chart Design Variables and Production Control.” International Journal of Production Research. 33: 2709–2721.
- Chen, H. C., A. B. Yeh, C. L. Yen, and L. A. Chen. 2012. “The Density Control Chart: A General Approach for Constructing a Single Chart for Simultaneously Monitoring Multiple Parameters.” International Journal of Production Research. 50: 3904–3919.10.1080/00207543.2011.604050
- Dondero, C. 1991. “SPC Hits the Road.” Quality Progress 24: 43–44.
- Duncan, A. J. 1956. “The Economic Design of X Charts Used to Maintain Current Control of a Process.” Journal of American Statistical Association 51: 228–242.
- Duncan, A. J. 1986. Quality Control and Industrial Statistics. Homewood, IL: Richard, D. Irwin.
- Epprecht, E. K., A. F. B. Costa, and F. C. T. Mendes. 2003. “Adaptive Control Charts for Attributes.” IIE Transactions 35: 567–582.10.1080/07408170304427
- Epprecht, E. K., B. F. T. Simões, and F. C. T. Mendes. 2010. “A Variable Sampling Interval EWMA Chart for Attributes.” The International Journal of Advanced Manufacturing Technology 49: 281–292.10.1007/s00170-009-2390-3
- Gan, F. F. 1993. “An Optimal Design of CUSUM Control Charts for Binomial Counts.” Journal of Applied Statistics 20: 445–460.10.1080/02664769300000045
- Haridy, S., Z. Wu, and J. Flaig. 2012. “Chi-squared Control Chart for Multiple Attributes.” International Journal of Industrial and Systems Engineering 12: 316–330.10.1504/IJISE.2012.049414
- Haridy, S., Z. Wu, M. B. C. Khoo, and F. J. Yu. 2012. “A Combined Synthetic and np Scheme for Detecting Increases in Fraction Nonconforming.” Computers and Industrial Engineering 62: 979–988.10.1016/j.cie.2011.12.024
- Haridy, S., Z. Wu, C. K. Lee, and N. Bhuiyan. 2013. “Optimal Average Sample Number of the SPRT Chart for Monitoring Fraction Nonconforming.” European Journal of Operational Research 229: 411–421.10.1016/j.ejor.2013.03.026
- Haridy, S., Z. Wu, F.-J. Yu, and M. Shamsuzzaman. 2013. “An Optimisation Design of the Combined np-CUSUM Scheme for Attributes.” European Journal of Industrial Engineering 7: 16–37.10.1504/EJIE.2013.051598
- Hawkins, D. M., and D. H. Olwell. 1998. Cumulative Sum Charts and Charting for Quality Improvement. New York: Springer-Verlag.10.1007/978-1-4612-1686-5
- Kemp, K. W. 1962. “The Use of Cumulative Sums for Sampling Inspection Schemes.” Applied Statistics 11: 16–31.10.2307/2985287
- Knoth, S., and S. Steinmetz. 2013. “EWMA p Charts Under Sampling by Variables.” International Journal of Production Research 51: 3795–3807.10.1080/00207543.2012.746799
- Lee, J., Y. Hur, S. H. Kim, and J. R. Wilson. 2012. “Monitoring Nonlinear Profiles Using a Wavelet-based Distribution-free CUSUM Chart.” International Journal of Production Research 50: 6574–6594.10.1080/00207543.2012.655865
- Lim, T. O., A. Soraya, L. M. Ding, and Z. Morad. 2002. “Assessing Doctors’ Competence: Application of CUSUM Technique in Monitoring Doctors’ Performance.” International Journal for Quality in Health Care 14: 251–258.10.1093/oxfordjournals.intqhc.a002616
- Lucas, J. M. 1985a. “Counted Data CUSUM’s.” Technometrics 27: 129–144.10.1080/00401706.1985.10488030
- Lucas, J. M. 1985b. “Cumulative Sum (CUSUM) Control Schemes.” Communications in Statistics – Theory and Methods 14: 2689–2704.10.1080/03610928508829070
- Lucas, J. M. 1989. “Control Schemes for Low Count Levels.” Journal of Quality Technology 21: 199–201.
- Montgomery, D. C. 2009. Introduction to Statistical Quality Control. 6th ed. New York: Wiley.
- Mousavi, S., and M. R. Reynolds Jr. 2009. “A CUSUM Chart for Monitoring a Proportion with Autocorrelated Binary Observations.” Journal of Quality Technology 41: 401–414.
- Page, E. S. 1954. “Continuous Inspection Schemes.” Biometrika 41: 100–115.
- Perry, M. B., and J. J. Pignatiello. 2011. “Estimating the Time of Step Change with Poisson CUSUM and EWMA Control Charts.” International Journal of Production Research 49: 2857–2871.10.1080/00207541003690082
- Pignatiello Jr, J. J., and T. R. Samuel. 2001. “Estimation of the Change Point of a Normal Process Mean in SPC Applications.” Journal of Quality Technology 33: 82–95.
- Radaelli, G. 1994. “Poisson and Negative Binomial Dynamics for Counted Data under CUSUM-type Charts.” Journal of Applied Statistics 21: 347–356.10.1080/757584012
- Reynolds Jr., M. R., and Z. G. Stoumbos. 1999. “A CUSUM Chart for Monitoring a Proportion When Inspecting Continuously.” Journal of Quality Technology 31: 87–108.
- Reynolds Jr., M. R., and Z. G. Stoumbos. 2004. “Should Observations be Grounded for Effective Process Monitoring.” Journal of Quality Technology 36: 343–366.
- Saniga, E. M., D. J. Davis, and T. P. Mcwilliams. 1995. “Economic, Statistical, and Economic-statistical Design of Attribute Charts.” Journal of Quality Technology 27: 56–73.
- Serel, D. A., and H. Moskowitz. 2008. “Joint Economic Design of EWMA Control Charts for Mean and Variance.” European Journal of Operational Research 184: 157–168.10.1016/j.ejor.2006.09.084
- Shu, M. H., B. M. Hsu, and M. C. Hu. 2012. “Optimal Combination of Soldering Conditions of BGA for Halogen-free and Lead-free SMT-green Processes.” Microelectronics Reliability 52: 2690–2700.10.1016/j.microrel.2012.06.033
- Shu, L., W. Jiang, and K. L. Tsui. 2008. “A Weighted CUSUM Chart for Detecting Patterned Means Shifts.” Journal of Quality Technology 40: 194–213.
- Tannock, J. D. T. 2003. “A Fuzzy Control Charting Method for Individuals.” International Journal of Production Research 41: 1017–1032.10.1080/0020754021000049808
- Tao, Z., F. Liu, F. Shen, M. Suh, and D. Booth. 2012. “A New Control Chart Based on the Loess Smooth Applied to Information System Quality Performance.” International Journal of Operational Research 15: 74–93.10.1504/IJOR.2012.048293
- Wang, S., T. Wu, S.-J. Weng, and J. Fowler. 2012. “A Control Chart Based Approach to Monitoring Supply Network Dynamics Using Kalman Filtering.” International Journal of Production Research 50: 3137–3151.10.1080/00207543.2011.597788
- White, C. L., J. B. Keats, and J. Stanley. 1997. “Poisson CUSUM vs. c Chart for Defect Data.” Quality Engineering 9: 673–679.10.1080/08982119708919089
- Woodall, W. H. 1997. “Control Charts Based on Attribute Data: Bibliography and Review.” Journal of Quality Technology 29: 172–183.
- Wu, Z., J. Jiao, and Y. Liu. 2008. “A Binomial CUSUM Chart for Detecting Large Shifts in Fraction Nonconforming.” Journal of Applied Statistics 35: 1267–1276.10.1080/02664760802320533
- Wu, Z., H. Luo, and X. Zhang. 2006. “Optimal np Control Chart with Curtailment.” European Journal of Operational Research 174: 1723–1741.10.1016/j.ejor.2005.03.038
- Wu, Z., and Y. Tian. 2005. “Weighted-loss-function CUSUM Chart for Monitoring Mean and Variance of a Production Process.” International Journal of Production Research 43: 3027–3044.10.1080/00207540500057639
- Wu, Z., M. Xie, and Y. Tian. 2002. “Optimization Design of the X & S Charts for Monitoring Process Capability.” Journal of Manufacturing Systems 21: 83–92.10.1016/S0278-6125(02)80002-4
- Wu, Z., S. H. Yeo, and T. A. Spedding. 2001. “A Synthetic Control Chart for Detecting Fraction Nonconforming Increases.” Journal of Quality Technology 33: 104–111.
- Yang, M., Z. Wu, K. M. Lee, and M. B. C. Khoo. 2012. “The X Control Chart for Monitoring Process Shifts in Mean and Variance.” International Journal of Production Research 50: 893–907.10.1080/00207543.2010.539283
- Yu, J., and J. Liu. 2011. “LRProb Control Chart Based on Logistic Regression for Monitoring Mean Shifts of Auto-correlated Manufacturing Processes.” International Journal of Production Research 49: 2301–2326.10.1080/00207541003694803