References
- Choi, B. K., C. S. Lee, J. S. Hwang, and C. S. Jun. 1988. “Compound Surface Modelling and Machining.” Computer-Aided Design 20: 127–136.10.1016/0010-4485(88)90020-6
- Ding, S., M. A. Mannan, A. N. Poo, D. C. H. Yang, and Z. Han. 2003. “Adaptive Iso-planar Tool Path Generation for Machining of Free-form Surfaces.” Computer-Aided Design 35: 141–153.10.1016/S0010-4485(02)00048-9
- Elber, G., and E. Cohen. 1994. “Toolpath Generation for Freeform Surface Models.” Computer-Aided Design 26: 490–496.10.1016/0010-4485(94)90070-1
- Feng, H. Y., and Z. Teng. 2005. “Iso-planar Piecewise Linear NC Tool Path Generation from Discrete Measured Data Points.” Computer-Aided Design 37: 55–64.10.1016/j.cad.2004.04.001
- Huang, Y., and J. H. Oliver. 1994. “Non-constant Parameter NC Tool Path Generation on Sculptured Surfaces.” The International Journal of Advanced Manufacturing Technology 9: 281–290.10.1007/BF01781282
- Kim, B. H., and B. K. Choi. 2000. “Guide Surface Based Tool Path Generation in 3-axis Milling: An Extension of the Guide Plane Method.” Computer-Aided Design 32: 191–199.10.1016/S0010-4485(99)00086-X
- Kim, B. H., and B. K. Choi. 2002. “Machining Efficiency Comparison Direction-parallel Tool Path with Contour-parallel Tool Path.” Computer-Aided Design 34: 89–95.10.1016/S0010-4485(00)00139-1
- Kumazawa, G. H. 2012. “Generating Efficient Milling Tool Paths According to a Preferred Feed Direction Field.” Master’s thesis, University of British Columbia.
- Lasemi, A., D. Y. Xue, and P. H. Gu. 2010. “Recent Development in CNC Machining of Freeform Surfaces: A State-of-the-Art Review.” Computer-Aided Design 42: 641–654.10.1016/j.cad.2010.04.002
- Lee, S., J. Han, and H. Lee. 2006. “Straightest Paths on Meshes by Cutting Planes.” In Proceeding of Geometric Modeling and Processing, Vol. 4077, 609–615. Pittsburgh, PA: LNCS.
- Lin, R. S., and Y. Koren. 1996. “Efficient Tool-path Planning for Machining Free-form Surfaces.” Journal of Engineering for Industry 118 (1): 20–28.10.1115/1.2803642
- Manav, C., H. S. Bank, and I. Lazoglu. 2013. “Intelligent Toolpath Selection via Multi-criteria Optimization in Complex Sculptured Surface Milling.” Journal of Intelligent Manufacturing 24: 349–355.10.1007/s10845-011-0596-3
- Monreal, M., and C. A. Rodriguez. 2003. “Influence of Tool Path Strategy on the Cycle Time of High-speed Milling.” Computer-Aided Design 35: 395–401.10.1016/S0010-4485(02)00060-X
- Otsu, N. 1979. “A Threshold Selection Method from Gray-level Histograms.” IEEE Transactions on Systems, Man, and Cybernetics 9 (1): 62–66.
- Polthier, K., and S. Schmies. 2006. “Straightest Geodesics on Polyhedral Surfaces.” In Proceeding of SIGGRAPH '06, ACM SIGGRAPH 2006 Courses, 30–38. New York: ACM.
- Siller, H., C. A. Rodriguez, and H. Ahuett. 2006. “Cycle Time Prediction in High-speed Milling Operations for Sculptured Surface Finishing.” Journal of Materials Processing Technology 174: 355–362.10.1016/j.jmatprotec.2006.02.008
- Xie, J., M. S. Zhou, and X. L. Cui. 2009. “Effect of Curvature Distribution Feature of Complex Free-form Surface on CNC Milling Performance.” Journal of Mechanical Engineering 45: 158–162 (in Chinese).10.3901/JME.2009.11.158
- Yoon, J. H. 2005. “Fast Tool Path Generation by the Iso-scallop Height Method for Ball-end Machining of Sculptured Surfaces.” International Journal of Production Research 43: 4989–4998.10.1080/00207540500218884
- Zhang, X. F., J. Xie, H. F. Xie, and L. H. Li. 2012. “Experimental Investigation on Various Tool Path Strategies Influencing Surface Quality and Form Accuracy of CNC Milled Complex Freeform Surface.” The International Journal of Advanced Manufacturing Technology 59: 647–654.10.1007/s00170-011-3515-z
- Zou, Q., J. Zhang, B. Deng, and J. Zhao. 2014. “Iso-level Tool Path Planning for Free-form Surfaces.” Computer-Aided Design 53: 117–125.10.1016/j.cad.2014.04.006