Optimisation of the aggregation and execution rates for intersecting operation sets: an example of machining process design

References

• Alting, L., and H. Zhang. 1989. “Computer Aided Process Planning: The State-of-the-Art Survey.” International Journal of Production Research 27 (4): 553–585. doi: 10.1080/00207548908942569
   Web of Science ®Google Scholar
• Arezoo, B., K. Ridgway, and A. M. A. Al-Ahmari. 2000. “Selection of Cutting Tools and Conditions of Machining Operations Using an Expert System.” Computers in Industry 42: 43–58. doi: 10.1016/S0166-3615(99)00051-2
   Web of Science ®Google Scholar
• Battaïa, O., and A. Dolgui. 2013. “A Taxonomy of Line Balancing Problems and Their Solution Approaches.” International Journal of Production Economics 142 (2): 259–277. doi: 10.1016/j.ijpe.2012.10.020
   Web of Science ®Google Scholar
• Battaïa, O., A. Dolgui, and N. Guschinsky. 2017. “Decision Support for Design of Reconfigurable Rotary Machining Systems for Family Part Production.” International Journal of Production Research 55 (5): 1368–1385. doi: 10.1080/00207543.2016.1213451
   Web of Science ®Google Scholar
• Bennett, D. P., and C. A. Yano. 2004. “A Decomposition Approach for an Equipment Selection and Multiple Product Routing Problem Incorporating Environmental Factors.” European Journal of Operational Research 156: 643–664. doi: 10.1016/S0377-2217(03)00138-3
   Web of Science ®Google Scholar
• Boysen, N. A., M. Fliedner, and A. Scholl. 2007. “A Classification of Assembly Line Balancing Problems.” European Journal of Operational Research 183: 674–693. doi: 10.1016/j.ejor.2006.10.010
   Web of Science ®Google Scholar
• Bukchin, J., and J. Rubinovitz. 2003. “A Weighted Approach for Assembly Line Design with Station Paralleling and Equipment Selection.” IIE Transactions 35: 73–85. doi: 10.1080/07408170304429
   Web of Science ®Google Scholar
• Bukchin, J., and M. Tzur. 2000. “Design of Flexible Assembly Line to Minimize Equipment Cost.” IIE Transactions 32: 585–598.
   Web of Science ®Google Scholar
• Cakir, M. C., and A. Gurarda. 2000. “Optimization of Machining Conditions for Multi-Tool Milling Operations.” International Journal of Production Research 38 (15): 3537–3552. doi: 10.1080/002075400422789
   Web of Science ®Google Scholar
• Dolgui, A., N. Guschinsky, and G. Levin. 2009. “Graph Approach for Optimal Design of Transfer Machine with Rotary Table.” International Journal of Production Research 47 (2): 321–341. doi: 10.1080/00207540802425880
   Web of Science ®Google Scholar
• Dolgui, A., G. Levin, B. Rozin, and I. Kasabutski. 2016. “Cost Optimization for Series-Parallel Execution of a Collection of Intersecting Operation Sets.” Engineering Optimization 48 (5): 756–771. doi: 10.1080/0305215X.2015.1056790
   Web of Science ®Google Scholar
• Gupta, D. P., B. Gopalakrishnan, S. A. Chaudhari, and S. Jalali. 2011. “Development of an Integrated Model for Process Planning and Parameter Selection for Machining Processes.” International Journal of Production Research 49 (21): 6301–6319. doi: 10.1080/00207543.2010.523722
   Web of Science ®Google Scholar
• Halevi, G. 2003. Process and Operation Planning. Dordrecht: Springer.
   Google Scholar
• Kara, Y., C. Ozguven, N. Yalcin, and Y. Atasagun. 2011. “Balancing Straight and U-Shaped Assembly Lines with Resource Dependent Task Times.” International Journal of Production Research 49 (21): 6387–6405. doi: 10.1080/00207543.2010.535039
   Web of Science ®Google Scholar
• Koren, Y., X. Gu, and W. Guo. 2018. “Choosing the System Configuration for High-Volume Manufacturing.” International Journal of Production Research 56 (1–2): 476–490. doi: 10.1080/00207543.2017.1387678
   Web of Science ®Google Scholar
• Levin, G., and B. Rozin. 2009. “Optimization of Machining Modes for Multi-Head Machines Under Group Replacement of Tools.” In Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM09), edited by N. Bakhtadze and A. Dolgui, 1125–1130. Moscow: Elsevier Science, 2009, IFAC-PapersOnline.net (ISSN 1474-6670).
   Google Scholar
• Levin, G., B. Rozin, and A. Dolgui. 2012. “Optimization of Multi-Tool Cutting Modes for Batch Manufacturing in Large Series Machining Environment.” In Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM12), edited by T. Borangiu, I. Dumitrache, A. Dolgui, and F. Filip, 444–448. Bucharest: Elsevier Science, 2012, IFAC-PapersOnline.net (ISSN 1474-6670).
   Google Scholar
• Levin, G., B. Rozin, and A. Dolgui. 2014. “Linear Approximation of the Problem of Optimization of Intensities of Series-Parallel Execution of Intersecting Operation Sets.” Informatics 3: 44–51. (In Russian).
   Google Scholar
• Levin, G., B. Rozin, and A. Dolgui. 2016. “Optimization of the Structure and Execution Modes of Intersecting Operation Sets.” In Proceedings of the 8th IFAC Conference on Modelling, Management and Control (MIM 2016), 105–110. Troyes: IFAC-PapersOnline.net 49-12.
   Google Scholar
• Levin, G., and V. Tanaev. 1978. Decomposition Methods for Optimizing Design Solutions. Minsk: Nauka i technika. (In Russian).
   Google Scholar
• Mohapatra, P., L. Benyoucef, and M. K. Tiwari. 2013. “Integration of Process Planning and Scheduling Through Adaptive Setup Planning: A Multi-Objective Approach.” International Journal of Production Research 51 (23–24): 7190–7208. doi: 10.1080/00207543.2013.853890
   Web of Science ®Google Scholar
• Rozin, B., G. Levin, and A. Dolgui. 2013. “Optimization of Multi-Tool Cutting Modes in Multi-Item Batch Manufacturing System.” In Proceedings of the IFAC Conference on Manufacturing Modelling, Management and Control (MIM'2013), edited by N. Bakhtadze, A. Dolgui, and V. Lototsky, 766–771. St Petersburg: Elsevier Science, IFAC-PapersOnline.net (ISSN 1474-6670).
   Google Scholar
• Singh, D. K. J., and C. Jebaraj. 2005. “Feature-based Design for Process Planning of Machining Processes with Optimization Using Genetic Algorithms.” International Journal of Production Research 43 (18): 3855–3887. doi: 10.1080/00207540500032160
   Web of Science ®Google Scholar
• Szadkowski, J. 1971. “An Approach to Machining Process Optimization.” International Journal of Production Research 9 (3): 371–376. doi: 10.1080/00207547108929887
   Google Scholar