Workload Control order release in general and pure flow shops with limited buffer size induced blocking: an assessment by simulation

References

• Bechte, W. 1994. “Load-oriented Manufacturing Control Just-in-Time Production for Job Shops.” Production Planning & Control 5 (3): 292–307.
   Web of Science ®Google Scholar
• Bergamaschi, D., R. Cigolini, M. Perona, and A. Portioli. 1997. “Order Review and Release Strategies in a Job Shop Environment: A Review and a Classification.” International Journal of Production Research 35 (2): 399–420.
   Web of Science ®Google Scholar
• Berkley, B. J. 1992. “A Review of the Kanban Production Control Research Literature.” Production & Operations Management 1 (4): 393–411.
   Web of Science ®Google Scholar
• Buzacott, J. A. 1976. “The Production Capacity of Job Shops with Limited Storage Space.” International Journal of Production Research 14 (5): 597–605.
   Google Scholar
• Cigolini, R., and A. Portioli-Staudacher. 2002. “An Experimental Investigation on Workload Limiting Methods with ORR Policies in a Job Shop Environment.” Production Planning & Control 13 (7): 602–613.
   Web of Science ®Google Scholar
• Cransberg, V., M. J. Land, C. Hicks, and M. Stevenson. 2016. “Handling the Complexities of Real-Life Job Shops When Implementing Workload Control: a Decision Framework and Case Study.” International Journal of Production Research 54 (4): 1094–1109.
   Web of Science ®Google Scholar
• Fernandes, N. O., and S. Carmo-Silva. 2011. “Workload Control Under Continuous Order Release.” International Journal of Production Economics 131: 257–262.
   Web of Science ®Google Scholar
• Fernandes, N. O., M. J. Land, and S. Carmo-Silva. 2016. “Aligning Workload Control Theory and Practice: Lot Splitting and Operation Overlapping Issues.” International Journal of Production Research 54 (10): 2965–2975.
   Web of Science ®Google Scholar
• Fernandes, N. O., M. Thürer, T. M. Pinho, P. Torres, and S. Carmo-Silva. 2020. “Workload Control and Optimised Order Release: An Assessment by Simulation.” International Journal of Production Research. doi:10.1080/00207543.2019.1630769.
   Web of Science ®Google Scholar
• Fredendall, L. D., D. Ojha, and J. W. Patterson. 2010. “Concerning the Theory of Workload Control.” European Journal of Operational Research 201 (1): 99–111.
   Web of Science ®Google Scholar
• Germs, R., and J. Riezebos. 2010. “Workload Balancing Capability of Pull Systems in MTO Production.” International Journal of Production Research 48 (8): 2345–2360.
   Web of Science ®Google Scholar
• Gershwin, S. B., and J. E. Schor. 2000. “Efficient Algorithms for Buffer Space Allocation.” Annals of Operations Research 93: 117–144.
   Web of Science ®Google Scholar
• Gonzalez-R, P. L., M. Calle, and J. L. Andrade-Pineda. 2018. “Job Shop Management of Products Under Internal Lifespan and External due Date.” International Journal of Production Research 56 (16): 5457–5474.
   Web of Science ®Google Scholar
• Haeussler, S., and P Netzer. 2020. “Comparison Between Rule- and Optimization-Based Workload Control Concepts: A Simulation Optimization Approach.” International Journal of Production Research. doi:10.1080/00207543.2019.1634297.
   Web of Science ®Google Scholar
• Hall, N. G., and C. Sriskandarajah. 1996. “A Survey of Machine Scheduling Problems with Blocking and No-Wait in Process.” Operations Research 44 (3): 510–525.
   Web of Science ®Google Scholar
• Harrod, S., and J. J. Kanet. 2013. “Applying Work Flow Control in Make-to-Order Shops.” International Journal of Production Economics 143: 620–626.
   Web of Science ®Google Scholar
• Haskose, A., B. G. Kingsman, and D. Worthington. 2002. “Modelling Flow and Jobbing Shops as a Queuing Network for Workload Control.” International Journal of Production Economics 78: 271–285.
   Web of Science ®Google Scholar
• Haskose, A., B. G. Kingsman, and D. Worthington. 2004. “Performance Analysis of Make-To-Order Manufacturing Systems Under Different Workload Control Regimes.” International Journal of Production Economics 90: 169–186.
   Web of Science ®Google Scholar
• Hendry, L. C., Y. Huang, and M. Stevenson. 2013. “Workload Control: Successful Implementation Taking a Contingency-Based View of Production Planning & Control.” International Journal of Operations & Production Management 33 (1): 69–103.
   Web of Science ®Google Scholar
• Henrich, P., M. Land, and G. Gaalman. 2004. “Exploring Applicability of the Workload Control Concept.” International Journal of Production Economics 90: 187–198.
   Web of Science ®Google Scholar
• Huang, Y. 2017. “Information Architecture for Effective Workload Control: An Insight From a Successful Implementation.” Production Planning & Control 28 (5): 351–366.
   Web of Science ®Google Scholar
• Hutter, T., S. Haeussler, and H. Missbauer. 2018. “Successful Implementation of an Order Release Mechanism Based on Workload Control: A Case Study of a Make-To-Stock Manufacturer.” International Journal of Production Research 56 (4): 1565–1580.
   Web of Science ®Google Scholar
• Land, M. J., and G. J. C. Gaalman. 1996. “Workload Control Concepts in Job Shops: A Critical Assessment.” International Journal of Production Economics 46-47: 535–548.
   Web of Science ®Google Scholar
• Land, M. J., and G. J. C. Gaalman. 1998. “The Performance of Workload Control Concepts in Job Shops: Improving the Release Method.” International Journal of Production Economics 56-57: 347–364.
   Web of Science ®Google Scholar
• Land, M. J., M. Stevenson, M. Thürer, and G. J. C. Gaalman. 2015. “Job Shop Control: In Search of the Key to Delivery Improvements.” International Journal of Production Economics 168: 257–266.
   Web of Science ®Google Scholar
• Leisten, R. 1990. “Flowshop Sequencing Problems with Limited Buffer Storage.” International Journal of Production Research 28 (11): 2085–2100.
   Web of Science ®Google Scholar
• Liu, S. Q., E. Kozan, M. Masoud, Y. Zhang, and F. T. S. Chan. 2018. “Job Shop Scheduling with a Combination of Four Buffering Constraints.” International Journal of Production Research 56 (9): 3274–3293.
   Web of Science ®Google Scholar
• Lödding, H., K.-W. Yu, and H.-P. Wiendahl. 2003. “Decentralized WIP-Oriented Manufacturing Control (DEWIP).” Production Planning & Control 14 (1): 42–54.
   Web of Science ®Google Scholar
• Mascis, A., and D. Pacciarelli. 2002. “Job-Shop Scheduling with Blocking and no-Wait Constraints.” European Journal of Operational Research 143: 498–517.
   Web of Science ®Google Scholar
• Oosterman, B., M. J. Land, and G. Gaalman. 2000. “The Influence of Shop Characteristics on Workload Control.” International Journal of Production Economics 68 (1): 107–119.
   Web of Science ®Google Scholar
• Perona, M., and A. Portioli. 1998. “The Impact of Parameter Setting in Load Oriented Manufacturing Control.” International Journal of Production Economics 55: 133–142.
   Web of Science ®Google Scholar
• Perona, M., N. Saccani, S. Bonetti, and A. Bacchetti. 2016. “Manufacturing Lead Time Shortening and Stabilisation by Means of Workload Control: An Action Research and a new Method.” Production Planning & Control 27 (7-8): 660–670.
   Web of Science ®Google Scholar
• Portioli-Staudacher, A., and M. Tantardini. 2012. “A Lean-Based ORR System for Non-Repetitive Manufacturing.” International Journal of Production Research 50 (12): 3257–3273.
   Web of Science ®Google Scholar
• Roser, C., K. Lorentzen, and J. Deuse. 2014. “Reliable Shop Floor Bottleneck Detection for Flow Lines Through Process and Inventory Observations.” Procedia CIRP 19: 63–68.
   Google Scholar
• Sabuncuoglu, I., and H. Y. Karapinar. 2000. “A Load-Based and Due-Date-Oriented Approach to Order Review/Release in Job Shops.” Decision Sciences 31 (2): 413–447.
   Web of Science ®Google Scholar
• Shi, C., and S. B. Gershwin. 2016. “A Segmentation Approach for Solving Buffer Allocation Problems in Large Production Systems.” International Journal of Production Research 54 (20): 6121–6141.
   Web of Science ®Google Scholar
• Silva, C., M. Stevenson, and M. Thürer. 2015. “A Case Study of the Successful Implementation of Workload Control: A Practitioner-Led Approach.” Journal of Manufacturing Technology Management 26 (2): 280–296.
   Web of Science ®Google Scholar
• Stevenson, M., L. C. Hendry, and B. G. Kingsman. 2005. “A Review of Production Planning and Control: The Applicability of key Concepts to the Make to Order Industry.” International Journal of Production Research 43 (5): 869–898.
   Web of Science ®Google Scholar
• Thürer, M., N. O. Fernandes, S. Carmo-Silva, and M. Stevenson. 2017. “Improving Performance in POLCA Controlled High Variety Shops: An Assessment by Simulation.” Journal of Manufacturing Systems 44: 143–153.
   Web of Science ®Google Scholar
• Thürer, M., N. O. Fernandes, M. Stevenson, and T. Qu. 2017. “On the Backlog-Sequencing Decision for Extending the Applicability of ConWIP to High-Variety Contexts: An Assessment by Simulation.” International Journal of Production Research 55 (16): 4695–4711.
   Web of Science ®Google Scholar
• Thürer, M., M. Godinho Filho, and M. Stevenson. 2013. “Coping with Finite Storage Space in Job Shops Through Order Release Control: An Assessment by Simulation.” International Journal of Computer Integrated Manufacturing 26 (9): 830–838.
   Web of Science ®Google Scholar
• Thürer, M., M. J. Land, M. Stevenson, L. D. Fredendall, and M. Godinho Filho. 2015. “Concerning Workload Control and Order Release: The Pre-Shop Pool Sequencing Decision.” Production & Operations Management 24 (7): 1179–1192.
   Web of Science ®Google Scholar
• Thürer, M., M. Stevenson, and C. W. Protzman. 2015. “COBACABANA (Control of Balance by Card Based Navigation): An Alternative to Kanban in the Pure Flow Shop?” International Journal of Production Economics 166: 143–151.
   Web of Science ®Google Scholar
• Thürer, M., M. Stevenson, C. Silva, M. J. Land, and L. D. Fredendall. 2012. “Workload Control (WLC) and Order Release: A Lean Solution for Make-to-Order Companies.” Production & Operations Management 21 (5): 939–953.
   Web of Science ®Google Scholar
• Thürer, M., M. Stevenson, C. Silva, M. J. Land, L. D. Fredendall, and S. A. Melnyk. 2014. “Lean Control for Make-to-Order Companies: Integrating Customer Enquiry Management and Order Release.” Production & Operations Management 23 (3): 463–476.
   Web of Science ®Google Scholar
• Wiendahl, H. P., J. Gläßner, and D. Petermann. 1992. “Application of Load-Oriented Manufacturing Control in Industry.” Production Planning & Control 3 (2): 118–129.
   Google Scholar
• Wisner, J. D. 1995. “A Review of the Order Release Policy Research.” International Journal of Operations & Production Management 15 (6): 25–40.
   Web of Science ®Google Scholar
• Xi, S., Q. Chen, J. MacGregor Smith, N. Mao, A. Yu, and H Zhang. 2020. “A new Method for Solving Buffer Allocation Problem in Large Unbalanced Production Lines.” International Journal of Production Research. doi:10.1080/00207543.2019.1685709.
   Web of Science ®Google Scholar
• Zäpfel, G., and H. Missbauer. 1993. “New Concepts for Production Planning and Control.” European Journal of Operational Research 67: 297–320.
   Web of Science ®Google Scholar