References
- Adan, Ivo J. B. F., and Jan Van der Wal. 1998. “Combining Make to Order and Make to Stock.” Operations-Research-Spektrum 20 (2): 73–81.
- Akinc, Umit, and Jack R. Meredith. 2006. “Choosing the Appropriate Capacity for a Make-to-Forecast Production Environment using a Markov Analysis Approach.” IIE Transactions 38 (10): 847–858.
- Akinc, Umit, and Jack R. Meredith. 2009. “Modeling the Manager's Match-or-Wait Dilemma in a Make-to-Forecast Production Situation.” Omega 37 (2): 300–311.
- Akkerman, Renzo, Dirk Van Der Meer, and Dirk Pieter Van Donk. 2010. “Make to Stock and Mix to Order: Choosing Intermediate Products in the Food-Processing Industry.” International Journal of Production Research 48 (12): 3475–3492.
- Almehdawe, Eman, and Elizabeth Jewkes. 2013. “Performance Analysis and Optimization of Hybrid Manufacturing Systems under a Batch Ordering Policy.” International Journal of Production Economics 144 (1): 200–208.
- Alptekinoğlu, Aydın, and Charles J. Corbett. 2010. “Leadtime-Variety Tradeoff in Product Differentiation.” Manufacturing & Service Operations Management 12 (4): 569–582.
- Altendorfer, Klaus, and Stefan Minner. 2014. “A Comparison of Make-to-Stock and Make-to-Order in Multi-Product Manufacturing Systems with Variable Due Dates.” IIE Transactions 46 (3): 197–212.
- Beemsterboer, Bart, Martin Land, and Ruud Teunter. 2016. “Hybrid MTO-MTS Production Planning: An Explorative Study.” European Journal of Operational Research 248 (2): 453–461.
- Beemsterboer, Bart, Martin Land, and Ruud Teunter. 2017. “Flexible Lot Sizing in Hybrid Make-to-Order/Make-to-Stock Production Planning.” European Journal of Operational Research 260 (3): 1014–1023.
- Beemsterboer, Bart, Martin Land, Ruud Teunter, and Jos Bokhorst. 2017. “Integrating Make-to-Order and Make-to-Stock in Job Shop Control.” International Journal of Production Economics 185: 1–10.
- Blanchard, Dave. 2010. “Dell Reinvents its Supply Chain.” Accessed October 15, 2018. https://www.industryweek.com/blog/dell-reinvents-its-supply-chain.
- Brabazon, Philip G., and Bart MacCarthy. 2004. “Virtual-build-to-Order as a Mass Customization Order Fulfilment Model.” Concurrent Engineering 12 (2): 155–165.
- Brabazon, Philip G., and Bart MacCarthy. 2006. “Fundamental Behaviour of Virtual-build-to-Order Systems.” International Journal of Production Economics 104 (2): 514–524.
- Brabazon, Philip G., Bart MacCarthy, Andrew Woodcock, and Robert W. Hawkins. 2010. “Mass Customization in the Automotive Industry: Comparing Interdealer Trading and Reconfiguration Flexibilities in Order Fulfillment.” Production and Operations Management 19 (5): 489–502.
- Calle, Marcos, and Pedro L. González-R. 2012. “Improved Virtual Build to Order.” In IEEE 17th Conference on Emerging Technologies & Factory Automation (ETFA), 2012, 1–4. IEEE.
- Calle, Marcos, Pedro L. González-R, Jose M. Leon, Henri Pierreval, and David Canca. 2016. “Integrated Management of Inventory and Production Systems Based on Floating Decoupling Point and Real-Time Information: A Simulation Based Analysis.” International Journal of Production Economics181: 48–57.
- Carr, Scott, and Izak Duenyas. 2000. “Optimal Admission Control and Sequencing in a Make-to-Stock/Make-to-Order Production System.” Operations Research 48 (5): 709–720.
- Carr, Stuart A., A. Refik Güllü, Peter L. Jackson, and John A. Muckstadt. 1993. “An Exact Analysis of a Production-Inventory Stretegy for Industrial Suppliers.” Technical Report. Cornell University Operations Research and Industrial Engineering.
- Cattani, Kyle D., Ely Dahan, and Glen M. Schmidt. 2010. “Lowest Cost May not Lower Total Cost: Using ‘Spackling’ to Smooth Mass-Customized Production.” Production and Operations Management19 (5): 531–545.
- Chang, Kuo-Hwa, and Yang-Shu Lu. 2010. “Queueing Analysis on a Single-Station Make-to-Stock/Make-to-Order Inventory-Production System.” Applied Mathematical Modelling 34 (4): 978–991.
- Chang, Sheng-Hung, Ping-Feng Pai, Kuo-Jung Yuan, Bo-Chang Wang, and Rong-Kwei Li. 2003. “Heuristic PAC Model for Hybrid MTO and MTS Production Environment.” International Journal of Production Economics 85 (3): 347–358.
- Chaudhry, Imran Ali, and Abid Ali Khan. 2016. “A Research Survey: Review of Flexible Job Shop Scheduling Techniques.” International Transactions in Operational Research 23 (3): 551–591.
- Chen, Xu, Allen H. Tai, and Yi Yang. 2014. “Optimal Production and Pricing Policies in a Combined Make-to-Order/Make-to-Stock System.” International Journal of Production Research 52 (23): 7027–7045.
- Choi, H. C. P. 2014. “Benefits of Additional Make-to-Stock Channel with Price Control Characteristic to Make-to-Order Channel.” International Journal of Supply Chain Management 3 (2): 77–84.
- Cid Yáñez, Fabian, J.-M. Frayret, François Léger, and Alain Rousseau. 2009. “Agent-Based Simulation and Analysis of Demand-Driven Production Strategies in the Timber Industry.” International Journal of Production Research 47 (22): 6295–6319.
- Denton, Brian, Diwakar Gupta, and Keith Jawahir. 2003. “Managing Increasing Product Variety at Integrated Steel Mills.” Interfaces 33 (2): 41–53.
- Eivazy, H., and M. Rabbani. 2009. “An Efficient Dispatching Method in the Hybrid Make-to-Stock/Make-to-Order Semiconductor Manufacturing Systems.” In International Conference on Computers & Industrial Engineering, 2009. CIE 2009, 1763–1768. IEEE.
- Eivazy, H., M. Rabbani, and M. Ebadian. 2009. “A Developed Production Control and Scheduling Model in the Semiconductor Manufacturing Systems with Hybrid Make-to-Stock/Make-to-Order Products.” The International Journal of Advanced Manufacturing Technology 45 (9-10): 968.
- Ellabban, Ahmed, and Tamer Abdelmaguid. 2019. “Optimized Production Control Policy for Hybrid MTS-MTO Glass Tube Manufacturing Using Simulation-Based Optimization.” In 2019 8th International Conference on Industrial Technology and Management (ICITM), 252–256. IEEE.
- Federgruen, Awi, and Aliza Heching. 1999. “Combined Pricing and Inventory Control under Uncertainty.” Operations Research 47 (3): 454–475.
- Federgruen, Awi, and Ziv Katalan. 1999. “The Impact of Adding a Make-to-Order Item to a Make-to-Stock Production System.” Management Science 45 (7): 980–994.
- Fernandes, Nuno O., Cristóvão Silva, and S. Carmo-Silva. 2015. “Order Release in the Hybrid MTO–FTO Production.” International Journal of Production Economics 170: 513–520.
- Gupta, Diwakar, and Saif Benjaafar. 2004. “Make-to-Order, Make-to-Stock, or Delay Product Differentiation? A Common Framework for Modeling and Analysis.” IIE Transactions 36 (6): 529–546.
- Gupta, Diwakar, and Lei Wang. 2007. “Capacity Management for Contract Manufacturing.” Operations Research 55 (2): 367–377.
- Hadj Youssef, Khaled, Christian Van Delft, and Yves Dallery. 2004. “Efficient Scheduling Rules in a Combined Make-to-Stock and Make-to-Order Manufacturing System.” Annals of Operations Research 126 (1-4): 103–134.
- Hadj Youssef, Khaled, Christian van Delft, and Yves Dallery. 2009. “Analysis and Optimization of a Combined Make-to-Stock and Make-to-Order Multiproduct Manufacturing System.” Advances in Decision Sciences. doi:10.1155/2009/716059.
- Hadj Youssef, Khaled, Christian Van Delft, and Yves Dallery. 2018. “Priority Optimization and Make-to-Stock/Make-to-Order Decision in Multiproduct Manufacturing Systems.” International Transactions in Operational Research 25 (4): 1199–1219.
- Hayes, Robert H. 1979. “Link Manufacturing Process and Product Life Cycle.” Harvard Business Review 133–140. https://hbr.org/1979/01/link-manufacturing-process-and-product-life-cycles.
- Hedenstierna, Philip, and Amos H. C. Ng. 2011. “Dynamic Implications of Customer Order Decoupling Point Positioning.” Journal of Manufacturing Technology Management 22 (8): 1032–1042.
- Hoekstra, S., J. Romme, and S. M. Argelo. 1992. Integral Logistic Structures: Developing Customer-oriented Goods Flow. Industrial Press.
- Hohenstein, Nils-Ole, Edda Feisel, Evi Hartmann, and Larry Giunipero. 2015. “Research on the Phenomenon of Supply Chain Resilience: A Systematic Review and Paths for Further Investigation.” International Journal of Physical Distribution & Logistics Management 45 (1/2): 90–117.
- Hopp, Wallace J., and Mark L. Spearman. 2001. Factory Physics. New York: Mcgraw-Hill.
- Hopp, Wallace J., and Mark L. Spearman. 2004. “To Pull or Not to Pull: What is the Question?” Manufacturing & Service Operations Management 6 (2): 133–148.
- Hvam, Lars. 2006. “Mass Customisation in the Electronics Industry: Based on Modular Products and Product Configuration.” International Journal of Mass Customisation 1 (4): 410–426.
- Iravani, Seyed M. R., Tieming Liu, and David Simchi-Levi. 2012. “Optimal Production and Admission Policies in Make-to-Stock/Make-to-Order Manufacturing Systems.” Production and Operations Management 21 (2): 224–235.
- Jeschke, Sabina, Christian Brecher, Tobias Meisen, Denis Özdemir, and Tim Eschert. 2017. “Industrial Internet of Things and Cyber Manufacturing Systems.” In Industrial Internet of Things, 3–19. Springer.
- Kalantari, Mahdokht, Masoud Rabbani, and Mahmood Ebadian. 2011. “A Decision Support System for Order Acceptance/Rejection in Hybrid MTS/MTO Production Systems.” Applied Mathematical Modelling 35 (3): 1363–1377.
- Khakdaman, Masoud, Kuan Yew Wong, Bahareh Zohoori, Manoj Kumar Tiwari, and Rico Merkert. 2015. “Tactical Production Planning in a Hybrid Make-to-Stock–Make-to-Order Environment under Supply, Process and Demand Uncertainties: A Robust Optimisation Model.” International Journal of Production Research 53 (5): 1358–1386.
- Kingsman, Brian, Linda Hendry, Alan Mercer, and Antonio de Souza. 1996. “Responding to Customer Enquiries in Make-to-Order Companies Problems and Solutions.” International Journal of Production Economics 46: 219–231.
- Köber, Jonathan, and Georg Heinecke. 2012. “Hybrid Production Strategy between Make-to-Order and Make-to-Stock–a Case Study at a Manufacturer of Agricultural Machinery with Volatile and Seasonal Demand.” Procedia Cirp 3: 453–458.
- Lee, Hau L., and Corey Billington. 1995. “The Evolution of Supply-Chain-Management Models and Practice at Hewlett-Packard.” Interfaces 25 (5): 42–63.
- Lin, Junyi, and Mohamed M. Naim. 2019. “Why do Nonlinearities Matter? The Repercussions of Linear Assumptions on the Dynamic Behaviour of Assemble-to-Order Systems.” International Journal of Production Research 57 (20): 6424–6451.
- Lin, Junyi, Virginia L. M. Spiegler, and Mohamed M. Naim. 2018. “Dynamic Analysis and Design of a Semiconductor Supply Chain: A Control Engineering Approach.” International Journal of Production Research 56 (13): 4585–4611.
- Meredith, Jack R., and Umit Akinc. 2007. “Characterizing and Structuring a New Make-to-Forecast Production Strategy.” Journal of Operations Management 25 (3): 623–642.
- Morikawa, Katsumi, Katsuhiko Takahashi, and Daisuke Hirotani. 2014. “Make-to-Stock Policies for a Multistage Serial System under a Make-to-Order Production Environment.” International Journal of Production Economics 147: 30–37.
- Nguyen, Viên. 1998. “A Multiclass Hybrid Production Center in Heavy Traffic.” Operations Research46 (3-supplement-3): S13–S25.
- Olhager, Jan. 2003. “Strategic Positioning of the Order Penetration Point.” International Journal of Production Economics 85 (3): 319–329.
- Perona, Marco, Nicola Saccani, and Simone Zanoni. 2009. “Combining Make-to-Order and Make-to-Stock Inventory Policies: An Empirical Application to a Manufacturing SME.” Production Planning and Control 20 (7): 559–575.
- Pinedo, Michael. 2005. Planning and Scheduling in Manufacturing and Services. New York: Springer.
- Rafiei, Hamed, and Masoud Rabbani. 2012. “Capacity Coordination in Hybrid Make-to-Stock/Make-to-Order Production Environments.” International Journal of Production Research 50 (3): 773–789.
- Rafiei, Hamed, Masoud Rabbani, and Maryam Alimardani. 2013. “Novel Bi-Level Hierarchical Production Planning in Hybrid MTS/MTO Production Contexts.” International Journal of Production Research51 (5): 1331–1346.
- Rajagopalan, Sampath. 2002. “Make to Order or Make to Stock: Model and Application.” Management Science 48 (2): 241–256.
- Raturi, Amitabh S., Jack R. Meredith, David M. McCutcheon, and Jeffrey D. Camm. 1990. “Coping with the Build-to-Forecast Environment.” Journal of Operations Management 9 (2): 230–249.
- Renna, Paolo. 2015. “Production Control Policies for a Multistage Serial System Under MTO-MTS Production Environment.” The International Journal of Advanced Manufacturing Technology 83 (1-4): 449–459.
- Rezaie, K., H. Eivazy, and S. Nazari-Shirkouhi. 2009. “A Novel Release Policy for Hybrid Make-to-Stock/Make-to-Order Semiconductor Manufacturing Systems.” In Second International Conference on Developments in eSystems Engineering (DESE), 2009, 443–447. IEEE.
- Sharman, Graham. 1984. “Rediscovery of Logistics.” Harvard Business Review 5: 71–79.
- Shukla, Vinaya, and M Naim Mohamed. 2015. “Rogue Seasonality in Supply Chains: An Investigation and a Measurement Approach.” Journal of Manufacturing Technology Management 26 (3): 364–389.
- Soman, Chetan Anil, Dirk Pieter van Donk, and Gerard Gaalman. 2006. “Comparison of Dynamic Scheduling Policies for Hybrid Make-to-Order and Make-to-Stock Production Systems with Stochastic Demand.” International Journal of Production Economics 104 (2): 441–453.
- Song, Jing-Sheng, and Paul Zipkin. 2003. “Supply Chain Operations: Assemble-to-Order Systems.” Handbooks in Operations Research and Management Science 11: 561–596.
- Sox, Charles R., L. Joseph Thomas, and John O. McClain. 1997. “Coordinating Production and Inventory to Improve Service.” Management Science 43 (9): 1189–1197.
- Stevenson, Mark, Linda C. Hendry, and Brian G. Kingsman. 2005. “A Review of Production Planning and Control: The Applicability of Key Concepts to the Make-to-Order Industry.” International Journal of Production Research 43 (5): 869–898.
- Sun, X. Y., P. Ji, L. Y. Sun, and Y. L. Wang. 2008. “Positioning Multiple Decoupling Points in a Supply Network.” International Journal of Production Economics 113 (2): 943–956.
- Tsubone, H., Y. Ishikawa, and H. Yamamoto. 2002. “Production Planning System for a Combination of Make-to-Stock and Make-to-Order Products.” International Journal of Production Research 40 (18): 4835–4851.
- Turner, Kevin, and Geoff Williams. 2005. “Modelling Complexity in the Automotive Industry Supply Chain.” Journal of Manufacturing Technology Management 16 (4): 447–458.
- Wang, Zhen, Yuanqing Qi, Hairong Cui, and Jihui Zhang. 2019. “A Hybrid Algorithm for Order Acceptance and Scheduling Problem in Make-to-Stock/Make-to-Order Industries.” Computers & Industrial Engineering 127: 841–852.
- Wikner, Joakim, Mohamed M. Naim, Virginia L. M. Spiegler, and Junyi Lin. 2017. “IOBPCS Based Models and Decoupling Thinking.” International Journal of Production Economics 194: 153–166.
- Williams, T. M. 1984. “Special Products and Uncertainty in Production/Inventory Systems.” European Journal of Operational Research 15 (1): 46–54.
- Winands, Erik M. M., Ivo J. B. F. Adan, and Geert-Jan van Houtum. 2011. “The Stochastic Economic Lot Scheduling Problem: A Survey.” European Journal of Operational Research 210 (1): 1–9.
- Wu, Muh-Cherng, Jr-Hsiung Jiang, and Wen-Jen Chang. 2008. “Scheduling a Hybrid MTO/MTS Semiconductor Fab with Machine-Dedication Features.” International Journal of Production Economics112 (1): 416–426.
- Yimer, Alebachew D., and Kudret Demirli. 2010. “A Genetic Approach to Two-Phase Optimization of Dynamic Supply Chain Scheduling.” Computers & Industrial Engineering 58 (3): 411–422.
- Yousefnejad, Helia, and Maryam Esmaeili. 2018. “Tactical Production Planning in a Hybrid MTS/MTO System using Stackelberg Game.” Operational Research 1–19.
- Zennaro, Ilenia, Serena Finco, Daria Battini, and Alessandro Persona. 2019. “Big Size Highly Customised Product Manufacturing Systems: A Literature Review and Future Research Agenda.” International Journal of Production Research 57 (15-16): 5362–5385.
- Zhang, Zhe George, Ilhyung Kim, Mark Springer, Gangshu George Cai, and Yugang Yu. 2013. “Dynamic Pooling of Make-to-Stock and Make-to-Order Operations.” International Journal of Production Economics 144 (1): 44–56.
- Zhang, Tao, Qipeng P. Zheng, Yi Fang, and Yuejie Zhang. 2015. “Multi-Level Inventory Matching and Order Planning under the Hybrid Make-To-Order/Make-To-Stock Production Environment for Steel Plants Via Particle Swarm Optimization.” Computers & Industrial Engineering 87: 238–249.