An investigation of the utilisation of different data sources in manufacturing with application in injection moulding

References

• Abbasimehr, Hossein, Mostafa Shabanib, and Mohsen Yousefic. 2020. “An Optimized Model Using LSTM Network for Demand Forecasting.” Computer & Industrial Engineering 143. doi: 10.1016/j.cie.2020.106435
   Web of Science ®Google Scholar
• Ageyeva, Tatyana, Szabolcs Horváth, and József Gábor Kovács. 2019. “In-Mold Sensors for Injection Molding: On the Way to Industry 4.0.” Sensors 19 (16): 3551. doi: 10.3390/s19163551
   PubMed Web of Science ®Google Scholar
• Ambrozic, Chris, and Lee Hutson. 2006. “Multivariate Analysis (MVA) for Quality Detection in Injection Molding Systems in The Medical Device Community.” In Annual Technical Conference–ANTEC, Conference Proceedings, Society of Plastics Engineers, Wetteren Belgium.
   Google Scholar
• Balázs, Kégl, Donald Wunsch, and Andrei Zinovyev. 2008. Principal Manifolds for Data Visualisation and Dimension Reduction, LNCSE 58. Springer, New York City.
   Google Scholar
• Dabeer, Sumaiya, Maha Mohammed Khan, and Saiful Islam. 2019. “Cancer Diagnosis in Histopathological Image: CNN Based Approach.” Informatics in Medicine Unlocked 16: 100231. doi: 10.1016/j.imu.2019.100231
   Google Scholar
• Dumitrescu, Oana R., Dave C. Baker, Gary M. Foster, and Ken E. Evans. 2005. “Near Infrared Spectroscopy for In-Line Monitoring During Injection Moulding.” Polymer Testing 24 (3): 367–375. http://www.sciencedirect.com/science/article/pii/S0142941804001576. doi: 10.1016/j.polymertesting.2004.10.003
   Web of Science ®Google Scholar
• Esbensen, Kim H., Dominique Guyot, Frank Westad, and Lars P. Houmoller. 2002. Multivariate Data Analysis: In Practice: An Introduction to Multivariate Data Analysis and Experimental Design. Oslo: CAMO.
   Google Scholar
• Farahani, Saeed, Nathaniel Brown, Jonathan Loftis, Curtis Krick, Florian Pichl, Robert Vaculik, and Srikanth Pilla. 2019. “Evaluation of In-Mold Sensors and Machine Data Towards Enhancing Product Quality and Process Monitoring Via Industry 4.0.” The International Journal of Advanced Manufacturing Technology 105 (1): 1371–1389. doi: 10.1007/s00170-019-04323-8
   Web of Science ®Google Scholar
• Fawaz, Hassan Ismail, Germain Forestier, Jonathan Weber, Lhassane Idoumghar, and Pierre-Alain Muller. 2019. “Deep Learning for Time Series Classification: A Review.” Data Mining and Knowledge Discovery33: 917–963. doi: 10.1007/s10618-019-00619-1
   Web of Science ®Google Scholar
• Frumosu, Flavia D., and Murat Kulahci. 2019. “Outlier Detection Using an Iterative Strategy for Semi-Supervised Learning.” Quality and Reliability Engineering International 35: 1408–1423. doi: 10.1002/qre.2522
   Web of Science ®Google Scholar
• Gao, Robert X., Xinyao Tang, Guthrie Gordon, and David O. Kazmer. 2014. “Online Product Quality Monitoring Through In-Process Measurement.” CIRP Annals 63 (1): 493–496. http://www.sciencedirect.com/science/article/pii/S0007850614000444. doi: 10.1016/j.cirp.2014.03.041
   Web of Science ®Google Scholar
• Goodfellow, Ian, Yoshua Bengio, and Aaron Courville. 2016. Deep Learning. Cambridge: An MIT Press Book.
   Google Scholar
• Hastie, Trevor, Robert Tibshirani, and Herome Friedman. 2017. The Elements of Statistical Learning – Data Mining, Inference, and Prediction. Springer, New York City.
   Google Scholar
• Hazen, D., and David O. Kazmer. 2007. “Multivariate Process Analysis for the Prediction of Injection Molded Part Quality.” In Annual Technical Conference-ANTEC, Conference Proceedings, Society of Plastics Engineers, Wetteren.
   Google Scholar
• Jolliffe, Ian. 2011. Principal Component Analysis, 1094–1096. Berlin, Heidelberg: Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-04898-2_455.
   Google Scholar
• Kazmer, David, S. Westerdale, and D. Hazen. 2008. “A Comparison of Statistical Process Control (SPC) and On-Line Multivariate Analyses (MVA) for Injection Molding.” International Polymer Processing Journal of the Polymer Processing Society 23 (5): 447–458. doi: 10.3139/217.2192
   Web of Science ®Google Scholar
• Kent, Robin. 2016. Quality Management in Plastics Processing – Strategies, Targets, Techniques and Tools, Chap. 10.12. Elsevier, Amsterdam.
   Google Scholar
• Kowalski, Scott M., Peter A. Parker, and G. Geoffrey Vining. 2007. “Tutorial: Industrial Split-plot Experiments.” Quality Engineering 19: 1–15. doi: 10.1080/08982110601057179
   Google Scholar
• Kulahci, Murat, Flavia Dalia Frumosu, Abdul Rauf Khan, Georg Ørnskov Rønsch, and Max Peter Spooner. 2020. “Experiences with Big Data: Accounts From a Data Scientist's Perspective.” Quality Engineering 32: 529–542. doi: 10.1080/08982112.2019.1686641
   Web of Science ®Google Scholar
• Liu, Chien-Liang, Wen-Hoar Hsaio, and Yao-Chung Tu. 2018. “Time Series Classification with Multivariate Convolutional Neural Network.” IEEE Transactions on Industrial Electronics 66: 4788–4797. doi: 10.1109/TIE.2018.2864702
   Web of Science ®Google Scholar
• Mao, Ting, Yun Zhang, Yufei Ruan, Huang Gao, Huamin Zhou, and Dequn Li. 2018. “Feature Learning and Process Monitoring of Injection Molding Using Convolution-deconvolution Auto Encoders.” Computers and Chemical Engineering 118: 77–90. doi: 10.1016/j.compchemeng.2018.07.009
   Web of Science ®Google Scholar
• McLauchlin, Andrew R., Oana Ghita, and Ali Gahkani. 2014. “Quantification of PLA Contamination in PET During Injection Moulding by In-Line NIR Spectroscopy.” Polymer Testing 38: 46–52. http://www.sciencedirect.com/science/article/pii/S0142941814001330. doi: 10.1016/j.polymertesting.2014.06.007
   Web of Science ®Google Scholar
• Nagorny, Pierre, Maurice Pillet, EricPairel Ronan Le Goff, Jérome Loureaux, Marlène Wali, and Patrice Kiener. 2017. “Quality Prediction in Injection Molding.” In IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA),  Annecy, IEEE.
   Google Scholar
• Ordóñez, Francisco Javier, and Daniel Roggen. 2016. “Deep Convolutional and LSTM Recurrent Neural Networks for Multimodal Wearable Activity Recognition.” MDPI Sensors 16: 115. doi: 10.3390/s16010115
   PubMed Web of Science ®Google Scholar
• Pyzdek, T.. 2003. The Six Sigma Handbook: A Complete Guide for Green Belts, Black Belts, and Managers At All Levels. Europe: Mcgraw-hill Education.
   Google Scholar
• Rauwendaal, Chris. 2000. SPC: Statistical Process Control in Injection Molding and Extrusion. Cincinnati, OH: Hanser Publishers.
   Google Scholar
• Sagheer, Alaa, and Mostafa Kotb. 2019. “Unsupervised Pre-training of a Deep LSTM-based Stacked Autoencoder for Multivariate Time Series Forecasting Problems.” Sci Rep 9: 19038. doi: 10.1038/s41598-019-55320-6
   PubMed Web of Science ®Google Scholar
• Sanchez-Fernandez, A., F. J. Baldan, G. I. Sainz-Palmero, J. M. Benítez, and M. J. Fuente. 2018. “Fault Detection Based on Time Series Modeling and Multivariate Statistical Process Control.” Chemometrics and Intelligent Laboratory Systems 182: 57–69. doi: 10.1016/j.chemolab.2018.08.003
   Web of Science ®Google Scholar
• Touzani, Samir, Jessica Granderson, and Samuel Fernandes. 2017. “Gradient Boosting Machine for Modeling the Energy Consumption of Commercial Buildings.” Energy and Buildings 158: 1533–1543. doi: 10.1016/j.enbuild.2017.11.039
   Web of Science ®Google Scholar
• Whelan, Tony, and John Goff. 1996. Quality Moulding. Bristol: Applied Market Information.
   Google Scholar
• Zhang, J., and S. M. Alexander. 2008. “Fault Diagnosis in Injection Moulding Via Cavity Pressure Signals.” International Journal of Production Research 46: 6499–6512. doi: 10.1080/00207540701429918
   Web of Science ®Google Scholar
• Zhang, Yun, Ting Mao, Zhigao Huang, Huang Gao, and Dequn Li. 2016. “A Statistical Quality Monitoring Method for Plastic Injection Molding Using Machine Built-In Sensors.” The International Journal of Advanced Manufacturing Technology 85 (9): 2483–2494. doi: 10.1007/s00170-015-8013-2
   Web of Science ®Google Scholar