Advanced search
Publication Cover
International Journal of Production Research Volume 61, 2023 - Issue 16
Submit an article Journal homepage
6,569
Views
35
CrossRef citations to date
0
Altmetric
Reviews

A literature review and design methodology for digital twins in the era of zero defect manufacturing

Foivos Psarommatisa SIRIUS, Department of Informatics, University of Oslo, Oslo, NorwayCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0002-2731-8727View further author information
ORCID Icon &
Gokan Mayb Department of Mechanical Engineering, University of North Florida, Jacksonville, USAORCID Iconhttps://orcid.org/0000-0002-9634-999XView further author information
ORCID Icon
Pages 5723-5743 | Received 18 Jan 2022, Accepted 05 Jul 2022, Published online: 29 Jul 2022

References

  • Afazov, Shukri, and Daniele Scrimieri. 2020. “Chatter Model for Enabling a Digital Twin in Machining.” International Journal of Advanced Manufacturing Technology 110 (9–10): 2439–2444. doi:10.1007/S00170-020-06028-9/FIGURES/5.
  • Ahuett-Garza, Horacio, and Pedro Daniel Urbina Coronado. 2019. “A Reference Model for Evolving Digital Twins and Its Application to Cases in the Manufacturing Floor.” Smart and Sustainable Manufacturing Systems 3 (2): 1–13. doi:10.1520/SSMS20190049.
  • Ali, M. A., R. Umer, and K. A. Khan. 2020. “A Virtual Permeability Measurement Framework for Fiber Reinforcements Using Micro CT Generated Digital Twins.” International Journal of Lightweight Materials and Manufacture 3 (3): 204–216. doi:10.1016/J.IJLMM.2019.12.002.
  • Ameri, Farhad, Dusan Sormaz, Foivos Psarommatis, and Dimitris Kiritsis. 2022. “Industrial Ontologies for Interoperability in Agile and Resilient Manufacturing.” International Journal of Production Research 60 (2): 420–441. doi:10.1080/00207543.2021.1987553.
  • Anderson, Stephen, Sigve Barvik, and Chad Rabitoy. 2019. “Innovative Digital Inspection Methods.” Proceedings of the Annual Offshore Technology Conference 2019-May (April). OnePetro. doi:10.4043/29387-MS.
  • Azangoo, Mohammad, Amir Taherkordi, and Jan Olaf Blech. 2020. “Digital Twins for Manufacturing Using UML and Behavioral Specifications.” IEEE Symposium on Emerging Technologies and Factory Automation, ETFA 2020-September (September). 1035–1038. doi:10.1109/ETFA46521.2020.9212165.
  • Baranwal, Ajay K., Suhas Pillai, Thang Nguyen, Jun Yashima, Jim Dewitt, Noriaki Nakayamada, Mikael Wahlsten, and Aki Fujimura. 2020. “A Deep Learning Mask Analysis Toolset Using Mask SEM Digital Twins.” In Photomask Technology 2020. Vol. 11518, 177–197. SPIE. doi:10.1117/12.2576431.
  • Barthelmey, Andre, Eunseo Lee, Ramy Hana, and Jochen Deuse. 2019. “Dynamic Digital Twin for Predictive Maintenance in Flexible Production Systems.” IECON Proceedings (Industrial Electronics Conference) 2019-October (October). IEEE Computer Society: 4209–4214. doi:10.1109/IECON.2019.8927397.
  • Batty, Michael. 2018. “Digital Twins: Environment and Planning B: Urban Analytics and City Science.” SAGE Journals 45 (5): 817–820. doi:10.1177/2399808318796416.
  • Becue, Adrien, Yannick Fourastier, Isabel Praca, Alexandre Savarit, Claude Baron, Baptiste Gradussofs, Etienne Pouille, and Carsten Thomas. 2018. “CyberFactory#1 - Securing the Industry 4.0 with Cyber-Ranges and Digital Twins.” IEEE International Workshop on Factory Communication Systems - Proceedings, WFCS 2018-June (July). 1–4. doi:10.1109/WFCS.2018.8402377.
  • Bellavista, P., and Alessio Mora. 2019. “Edge Cloud as an Enabler for Distributed AI in Industrial IoT Applications: The Experience of the IoTwins Project.” Undefined.
  • Blake, Scott. n.d. “Using Digital Technology in Composites Fabrication to Create a Comprehensive As-Built Digital Twin.”.
  • Blum, Matthias, and Guenther Schuh. 2017. “Towards a Data-Oriented Optimization of Manufacturing Processes A Real-Time Architecture for the Order Processing as a Basis for Data Analytics Methods.” doi:10.5220/0006326002570264.
  • Bohlin, Robert, Jonas Hagmar, Kristofer Bengtsson, Lars Lindkvist, Johan S. Carlson, and Rikard Söderberg. 2018. “Data Flow and Communication Framework Supporting Digital Twin for Geometry Assurance.” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2 (January). American Society of Mechanical Engineers Digital Collection. doi:10.1115/IMECE2017-71405.
  • Borangiu, Theodor, Silviu Raileanu, Andrei Silisteanu, Silvia Anton, and Florin Anton. 2020. “Smart Manufacturing Control with Cloud-Embedded Digital Twins.” 2020 24th International Conference on System Theory, Control and Computing, ICSTCC 2020 - Proceedings, October. 915–920. doi:10.1109/ICSTCC50638.2020.9259684.
  • Bordatchev, Evgueni V., Srdjan J. Cvijanovic, and Remus O. Tutunea-Fatan. 2020. “Preliminary Experimental Analysis of the Surface Topography Formation During Laser Polishing H13 Tooling Steel Using Statistical Characteristics of the Surface Amplitude Distribution.” Procedia Manufacturing 48: 159–164. doi:10.1016/J.PROMFG.2020.05.033.
  • Borovkov, A. I., L. B. Maslov, K. S. Ivanov, E. N. Kovaleva, F. D. Tarasenko, and M. A. Zhmaylo. 2020. “Improving the Printing Process Stability and the Geometrical Accuracy of the Parts Manufactured by the Additive Techniques.” IOP Conference Series: Materials Science and Engineering 986 (1): 012033–012045. doi:10.1088/1757-899X/986/1/012033.
  • Brereton, Pearl, Barbara A. Kitchenham, David Budgen, Mark Turner, and Mohamed Khalil. 2007. “Lessons from Applying the Systematic Literature Review Process Within the Software Engineering Domain.” Journal of Systems and Software 80 (4): 571–583. doi:10.1016/J.JSS.2006.07.009.
  • Cai, Hongxia, Wei Zhang, and Zheng Zhu. 2019. “Quality Management and Analysis of Aircraft Final Assembly Based on Digital Twin.” Proceedings - 2019 11th International Conference on Intelligent Human-Machine Systems and Cybernetics, IHMSC 2019 1 (August). 202–205. doi:10.1109/IHMSC.2019.00054.
  • Cai, Hongxia, Jiamin Zhu, and Wei Zhang. 2021. “Quality Deviation Control for Aircraft Using Digital Twin.” Journal of Computing and Information Science in Engineering 21 (3): 031008–031018. doi:10.1115/1.4050376/1102047.
  • Cao, Jiqing. 2017. “Research on Operation and Maintenance Management of Equipment under Intelligent Manufacturing.” Proceedings - 2017 Chinese Automation Congress, CAC 2017 2017-January (December). 5188–5191. doi:10.1109/CAC.2017.8243701.
  • Centomo, Stefano, Nicola Dall’ora, and Franco Fummi. 2020. “The Design of a Digital-Twin for Predictive Maintenance.” IEEE Symposium on Emerging Technologies and Factory Automation, ETFA 2020-September (September). 1781–1788. doi:10.1109/ETFA46521.2020.9212071.
  • Centomo, Stefano, Marco Panato, and Franco Fummi. 2019. “Cyber-Physical Systems Integration in a Production Line Simulator.” IEEE/IFIP International Conference on VLSI and System-on-Chip, VLSI-SoC 2018-October (February). IEEE Computer Society: 237–242. doi:10.1109/VLSI-SOC.2018.8644836.
  • Changming, Hu, Cao Yaqi, and Zhu Zhaoyu. 2020. “Exploration and Practice of Digital Factory of Complex Electronic Equipment.” IOP Conference Series: Materials Science and Engineering 739 (1): 012048–012066. doi:10.1088/1757-899X/739/1/012048.
  • Chen, Xinchun, Naiqing Yan, Can Wang, and Peng Ding. 2020. “Study on Straightening Quality Control for Slender Rod Based on Digital Twin.” Journal of Physics: Conference Series 1633 (1): 012160–012167. doi:10.1088/1742-6596/1633/1/012160.
  • Cheng, De Jun, Jie Zhang, Zhong Tai Hu, Sheng Hao Xu, and Xi Feng Fang. 2020. “A Digital Twin-Driven Approach for On-Line Controlling Quality of Marine Diesel Engine Critical Parts.” International Journal of Precision Engineering and Manufacturing 21 (10): 1821–1841. doi:10.1007/S12541-020-00403-Y/FIGURES/20.
  • Cho, Sangje, Gökan May, Ioannis Tourkogiorgis, Roberto Perez, Oscar Lazaro, Borja de la Maza, and Dimitris Kiritsis. 2018. “A Hybrid Machine Learning Approach for Predictive Maintenance in Smart Factories of the Future.” IFIP Advances in Information and Communication Technology 536 (August): 311–317. doi:10.1007/978-3-319-99707-0_39.
  • Constantinescu, Carmen, Stefan Giosan, Raul Matei, and Denis Wohlfeld. 2020. “A Holistic Methodology for Development of Real-Time Digital Twins.” Procedia CIRP 88 (January): 163–166. doi:10.1016/J.PROCIR.2020.05.029.
  • Damgrave, R. G. J., and E. Lutters. 2019. “Smart Industry Testbed.” Procedia CIRP 84 (January): 387–392. doi:10.1016/J.PROCIR.2019.04.215.
  • Demartini, Melissa, Federico Galluccio, Paolo Mattis, Islam Abusohyon, Raffaello Lepratti, and Flavio Tonelli. 2019. “Closed-Loop Manufacturing for Aerospace Industry: An Integrated PLM-MOM Solution to Support the Wing Box Assembly Process.” IFIP Advances in Information and Communication Technology 567 (September): 423–430. doi:10.1007/978-3-030-29996-5_49.
  • Ding, Kai, Felix T.S. Chan, Xudong Zhang, Guanghui Zhou, and Fuqiang Zhang. 2019. “Defining a Digital Twin-Based Cyber-Physical Production System for Autonomous Manufacturing in Smart Shop Floors.” International Journal of Production Research 57 (20): 6315–6334. doi:10.1080/00207543.2019.1566661.
  • Dittrich, Marc André, Benjamin Schleich, Till Clausmeyer, Roy Damgrave, John Ahmet Erkoyuncu, Benjamin Haefner, Jos de Lange, Denys Plakhotnik, Wieben Scheidel, and Thorsten Wuest. 2019. “Shifting Value Stream Patterns Along the Product Lifecycle with Digital Twins.” Procedia CIRP 86 (January): 3–11. doi:10.1016/J.PROCIR.2020.01.049.
  • Dreyfus, Paul-Arthur, Foivos Psarommatis, May Gokan, and Dimitris Kiritsis. 2021. “Virtual Metrology as an Approach for Product Quality Estimation in Industry 4.0: A Systematic Review and Integrative Conceptual Framework.” International Journal of Production Research 60 (2): 742–765. doi:10.1080/00207543.2021.1976433.
  • Errandonea, Itxaro, Sergio Beltrán, and Saioa Arrizabalaga. 2020. “Digital Twin for Maintenance: A Literature Review.” Computers in Industry 123 (December): 103316. doi:10.1016/J.COMPIND.2020.103316.
  • Felton, Keith, and John Ferguson. 2020. “Design Process Methodology for Achieving High-Volume Production Quality for FOWLP Packaging.” 2020 International Wafer Level Packaging Conference, IWLPC 2020, October. doi:10.23919/IWLPC52010.2020.9375892.
  • Ferreira, Lucía Alonso, Manuel Álvarez Souto, Cédric Chappuis, and Fouad El Khaldi. 2020. “Off-Line Programming of a Flexible and Adaptive Production Line for Composite-Metal Multi-Material Manufacturing Based on OPC-UA Communication.” Procedia Manufacturing 51 (January): 520–526. doi:10.1016/J.PROMFG.2020.10.073.
  • Franciosa, Pasquale, Mikhail Sokolov, Sumit Sinha, Tianzhu Sun, and Dariusz Ceglarek. 2020. “Deep Learning Enhanced Digital Twin for Closed-Loop In-Process Quality Improvement.” CIRP Annals 69 (1): 369–372. doi:10.1016/J.CIRP.2020.04.110.
  • Gibson, Ian, David Rosen, Brent Stucker, and Mahyar Khorasani. 2021. “Direct Digital Manufacturing.” Manufacturing Engineering 142 (1): 525–554. doi:10.1007/978-3-030-56127-7_18.
  • Giuliano, Gillo, Andrea Corrado, and Wilma Polini. 2021. “A Geometric Algorithm to Evaluate the Thickness Distribution of Stretched Sheets Through Finite Element Analysis.” Applied Sciences 11 (4): 1905–1919. doi:10.3390/APP11041905.
  • Gohari, Hossein, Cody Berry, and Ahmad Barari. 2019. “A Digital Twin for Integrated Inspection System in Digital Manufacturing.” IFAC-PapersOnLine 52 (10): 182–187. doi:10.1016/J.IFACOL.2019.10.020.
  • Gramegna, Nicola, Fabrizio Greggio, and Franco Bonollo. 2020. “Smart Factory Competitiveness Based on Real Time Monitoring and Quality Predictive Model Applied to Multi-Stages Production Lines.” IFIP Advances in Information and Communication Technology 592 (August): 185–196. doi:10.1007/978-3-030-57997-5_22.
  • Grieves, Michael. 2014. “Digital Twin: Manufacturing Excellence Through Virtual Factory Replication.” White Paper 1: 1–7.
  • Grieves, Michael W. 2019. “Virtually Intelligent Product Systems: Digital and Physical Twins.” Complex Systems Engineering: Theory and Practice, 175–200. doi:10.2514/5.9781624105654.0175.0200.
  • Groen, Manso, Soheil Solhjoo, Ruud Voncken, Jan Post, and Antonis I Vakis. 2020. “FlexMM: A Standard Method for Material Descriptions in FEM.” Undefined 148 (October): 102876–102889. doi:10.1016/J.ADVENGSOFT.2020.102876.
  • Guerra, Rodolfo Haber, Ramon Quiza, Alberto Villalonga, Javier Arenas, and Fernando Castano. 2019. “Digital Twin-Based Optimization for Ultraprecision Motion Systems with Backlash and Friction.” IEEE Access 7: 93462–93472. doi:10.1109/ACCESS.2019.2928141.
  • Gunasegaram, D. R., A. B. Murphy, A. Barnard, T. DebRoy, M. J. Matthews, L. Ladani, and D. Gu. 2021. “Towards Developing Multiscale-Multiphysics Models and Their Surrogates for Digital Twins of Metal Additive Manufacturing.” Additive Manufacturing 46 (October): 102089–102106. doi:10.1016/J.ADDMA.2021.102089.
  • Guo, Jinyan, Zhaojun Yang, Chuanhai Chen, Wei Luo, and Wei Hu. 2021. “Real-Time Prediction of Remaining Useful Life and Preventive Maintenance Strategy Based on Digital Twin.” Undefined 21 (3): 031003 –031017. doi:10.1115/1.4049153.
  • Guo, Feiyan, Fang Zou, Jianhua Liu, and Zhongqi Wang. 2018. “Working Mode in Aircraft Manufacturing Based on Digital Coordination Model.” The International Journal of Advanced Manufacturing Technology 98 (5): 1547–1571. doi:10.1007/s00170-018-2048-0.
  • Gurjanov, A. V., V. I. Babenkov, A. V. Shukalov, I. O. Zharinov, and O. O. Zharinov. 2021. “Total Quality Control of the Cyber-Physical Production Using Machine Vision Technologies.” Journal of Physics: Conference Series 1889 (5): 052014–052021. doi:10.1088/1742-6596/1889/5/052014.
  • Hänel, Albrecht, Thorben Schnellhardt, Eric Wenkler, Andreas Nestler, Alexander Brosius, Christian Corinth, Alexander Fay, and Steffen Ihlenfeldt. 2020. “The Development of a Digital Twin for Machining Processes for the Application in Aerospace Industry.” Procedia CIRP 93 (January): 1399–1404. doi:10.1016/J.PROCIR.2020.04.017.
  • Hao, B., M. Y. Wang, S. L. Fu, D. P. Xu, and J. X. Wang. 2020. “Quality Control Mode of Intelligent Assembly Workshop Based on Digital Twin.” Journal of Physics: Conference Series 1605 (1): 012036–012049. doi:10.1088/1742-6596/1605/1/012036.
  • He, Bin, and Kai Jian Bai. 2021. “Digital Twin-Based Sustainable Intelligent Manufacturing: A Review.” Advances in Manufacturing 9 (1): 1–21. doi:10.1007/S40436-020-00302-5/FIGURES/4.
  • Hehr, Adam, Mark Norfolk, Justin Wenning, John Sheridan, Paul Leser, Patrick Leser, and John A. Newman. 2017. “Integrating Fiber Optic Strain Sensors Into Metal Using Ultrasonic Additive Manufacturing.” JOM (Warrendale, Pa.: 1989) 70 (3): 315–320. doi:10.1007/S11837-017-2709-8.
  • Howard, Dwight. 2019. “The Digital Twin: Virtual Validation In Electronics Development And Design.” 2019 Pan Pacific Microelectronics Symposium, Pan Pacific 2019, April. doi:10.23919/PANPACIFIC.2019.8696712.
  • Hsieh, Hsiu Fang, and Sarah E. Shannon. 2005. “Three Approaches to Qualitative Content Analysis.” Qualitative Health Research 15 (9): 1277–1288. doi:10.1177/1049732305276687.
  • Huang, Yin, Shumin Huang, Yichen Zhang, Xue Yang, and Runda Liu. 2020. “Product Quality Tracing in Manufacturing Supply Chain Based on Big Data Technology.” Recent Patents on Mechanical Engineering 13 (4): 340–351. doi:10.2174/2212797613999200525135351.
  • Hürkamp, André, Sebastian Gellrich, Tim Ossowski, Jan Beuscher, Sebastian Thiede, Christoph Herrmann, and Klaus Dröder. 2020. “Combining Simulation and Machine Learning as Digital Twin for the Manufacturing of Overmolded Thermoplastic Composites.” Journal of Manufacturing and Materials Processing 4 (3): 92–112. doi:10.3390/JMMP4030092.
  • Hürkamp, André, Ralf Lorenz, Tim Ossowski, Bernd Arno Behrens, and Klaus Dröder. 2021. “Simulation-Based Digital Twin for the Manufacturing of Thermoplastic Composites.” Procedia CIRP 100 (January): 1–6. doi:10.1016/J.PROCIR.2021.05.001.
  • Jones, David, Chris Snider, Aydin Nassehi, Jason Yon, and Ben Hicks. 2020. “Characterising the Digital Twin: A Systematic Literature Review.” CIRP Journal of Manufacturing Science and Technology 29 (May): 36–52. doi:10.1016/J.CIRPJ.2020.02.002.
  • Kang, Sungjoo, Ingeol Chun, and Hyeon Soo Kim. 2019. “Design and Implementation of Runtime Verification Framework for Cyber-Physical Production Systems.” Journal of Engineering (United Kingdom), 2875236–2875247. doi:10.1155/2019/2875236.
  • Klingaa, C. G., S. Mohanty, C. V. Funch, A. B. Hjermitslev, L. Haahr-Lillevang, and J. H. Hattel. 2021. “Towards a Digital Twin of Laser Powder Bed Fusion with a Focus on Gas Flow Variables.” Journal of Manufacturing Processes 65 (May): 312–327. doi:10.1016/J.JMAPRO.2021.03.035.
  • Ko, Hyunwoong, Paul Witherell, Ndeye Y. Ndiaye, and Yan Lu. 2019. “Machine Learning Based Continuous Knowledge Engineering for Additive Manufacturing.” IEEE International Conference on Automation Science and Engineering 2019-August (August). IEEE Computer Society: 648–654. doi:10.1109/COASE.2019.8843316.
  • Krippendorff, Klaus. 2018. Content Analysis: An Introduction to Its Methodology. 4th ed. London: SAGE Publications Inc. https://www.akademika.no/9781506395661/realfag/naturvitenskap-filosofi-teori-og-metode/vitenskapelig-metode/content-analysis.
  • Kubota, Tsubasa, Chao Liu, Khamdi Mubarok, and Xun Xu. 2018. “A Cyber-Physical Machine Tool Framework Based on STEP-NC,” December.
  • Lacueva-Perez, Francisco Jose, Setia Hermawati, Pedro Amoraga, Ricardo Salillas-Martinez, Rafael Del Hoyo Alonso, and Glyn Lawson. 2020. “SHION: Towards An Interactive Digital Twin Supporting Shopfloor Operations on Real Time.” IEEE Internet Computing 26 (3): 23–32. doi:10.1109/MIC.2020.3047349.
  • Lechler, Tobias, Eva Fischer, Maximilian Metzner, Andreas Mayr, and Jörg Franke. 2019. “Virtual Commissioning – Scientific Review and Exploratory Use Cases in Advanced Production Systems.” Procedia CIRP 81 (January): 1125–1130. doi:10.1016/J.PROCIR.2019.03.278.
  • Leng, Jiewu, Douxi Yan, Qiang Liu, Kailin Xu, J. Leon Zhao, Rui Shi, Lijun Wei, Ding Zhang, and Xin Chen. 2020. “ManuChain: Combining Permissioned Blockchain with a Holistic Optimization Model as Bi-Level Intelligence for Smart Manufacturing.” IEEE Transactions on Systems, Man, and Cybernetics: Systems 50 (1): 182–192. doi:10.1109/TSMC.2019.2930418.
  • Levy, Benjamin, Mohamed El Mansori, Mourad El Hadrouz, Sabeur Mezghani, Anne Laure Beaudonnet, and Julien Cabrero. 2021. “Smart Tribo-Peening Process for Surface Functionalization Through Digital Twin Concept.” International Journal of Advanced Manufacturing Technology 114 (11–12): 3695–3717. doi:10.1007/S00170-021-07143-X/TABLES/9.
  • Li, Jingjing, Guanghui Zhou, and Chao Zhang. 2021. “A Twin Data and Knowledge-Driven Intelligent Process Planning Framework of Aviation Parts.” doi:10.1080/00207543.2021.1951869.
  • Lindström, John, Petter Kyösti, Wolfgang Birk, and Erik Lejon. 2020. “An Initial Model for Zero Defect Manufacturing.” Applied Sciences 10 (13): 4570–4586. doi:10.3390/APP10134570.
  • Liu, Shimin, Jinsong Bao, Yuqian Lu, Jie Li, Shanyu Lu, and Xuemin Sun. 2021a. “Digital Twin Modeling Method Based on Biomimicry for Machining Aerospace Components.” Journal of Manufacturing Systems 58 (January): 180–195. doi:10.1016/J.JMSY.2020.04.014.
  • Liu, Chao, Léopold Le Roux, Carolin Körner, Olivier Tabaste, Franck Lacan, and Samuel Bigot. 2020. “Digital Twin-Enabled Collaborative Data Management for Metal Additive Manufacturing Systems.” Journal of Manufacturing Systems 62: 857–874. doi:10.1016/J.JMSY.2020.05.010.
  • Liu, Shimin, Shanyu Lu, Jie Li, Xuemin Sun, Yuqian Lu, and Jinsong Bao. 2021b. “Machining Process-Oriented Monitoring Method Based on Digital Twin via Augmented Reality.” International Journal of Advanced Manufacturing Technology 113 (11–12): 3491–3508. doi:10.1007/S00170-021-06838-5/TABLES/4.
  • Liu, X., W. J. Zhang, R. Radhakrishnan, and Y. L. Tu. 2008. “Manufacturing Perspective of Enterprise Application Integration: The State of the Art Review.” International Journal of Production Research 46 (16): 4567–4596. doi:10.1080/00207540701263325.
  • Liu, Jinfeng, Peng Zhao, Xuwen Jing, Xuwu Cao, Sushan Sheng, Honggen Zhou, Xiaojun Liu, and Feng Feng. 2021a. “Dynamic Design Method of Digital Twin Process Model Driven by Knowledge-Evolution Machining Features.” doi:10.1080/00207543.2021.1887531.
  • Liu, Jinfeng, Peng Zhao, Xuwen Jing, Xuwu Cao, Sushan Sheng, Honggen Zhou, Xiaojun Liu, and Feng Feng. 2021b. “Dynamic Design Method of Digital Twin Process Model Driven by Knowledge-Evolution Machining Features.” doi:10.1080/00207543.2021.1887531.
  • Liu, Jinfeng, Honggen Zhou, Xiaojun Liu, Guizhong Tian, Mingfang Wu, Liping Cao, and Wei Wang. 2019. “Dynamic Evaluation Method of Machining Process Planning Based on Digital Twin.” IEEE Access 7: 19312–19323. doi:10.1109/ACCESS.2019.2893309.
  • Loaldi, Dario, Francesco Regi, Federico Baruffi, Matteo Calaon, Danilo Quagliotti, Yang Zhang, and Guido Tosello. 2020. “Experimental Validation of Injection Molding Simulations of 3D Microparts and Microstructured Components Using Virtual Design of Experiments and Multi-Scale Modeling.” Micromachines 11 (6): 614–631. doi:10.3390/MI11060614.
  • Longo, Francesco, Letizia Nicoletti, and Antonio Padovano. 2019. “Ubiquitous Knowledge Empowers the Smart Factory: The Impacts of a Service-Oriented Digital Twin on Enterprises’ Performance.” Annual Reviews in Control 47 (January): 221–236. doi:10.1016/J.ARCONTROL.2019.01.001.
  • Lv, Qibing, Rong Zhang, Xuemin Sun, Yuqian Lu, and Jinsong Bao. 2021. “A Digital Twin-Driven Human-Robot Collaborative Assembly Approach in the Wake of COVID-19.” Journal of Manufacturing Systems 60 (July): 837–851. doi:10.1016/J.JMSY.2021.02.011.
  • Ma, Yuanye, Hang Zhou, Honghong He, Guotao Jiao, and Sha Wei. 2019. “A Digital Twin-Based Approach for Quality Control and Optimization of Complex Product Assembly.” Proceedings - 2019 International Conference on Artificial Intelligence and Advanced Manufacturing, AIAM 2019, October. 762–767. doi:10.1109/AIAM48774.2019.00157.
  • Maginnis, M. Abbot, Buddhika M. Hapuwatte, and David Keown. 2019. “The Integration of True Lean and Industry 4.0 to Sustain a Culture of Continuous Improvement.” IFIP Advances in Information and Communication Technology 565: 336–345. doi:10.1007/978-3-030-42250-9_32.
  • Mandolla, Claudio, Antonio Messeni Petruzzelli, Gianluca Percoco, and Andrea Urbinati. 2019. “Building a Digital Twin for Additive Manufacturing Through the Exploitation of Blockchain: A Case Analysis of the Aircraft Industry.” Computers in Industry 109 (August 2019): 134–152. doi:10.1016/J.COMPIND.2019.04.011.
  • Mario, Caterino, Greco Alessandro, and Laudante Elena. 2019. “Robotic Simulation Technique for Validating a Working Process on Composite Components: A Case Study.” Materials Science Forum 957: 340–347. doi:10.4028/www.SCIENTIFIC.NET/MSF.957.340.
  • Min, Soo Hong, Tae Hun Lee, Gil Yong Lee, Daniel Zontar, Christian Brecher, and Sung Hoon Ahn. 2020. “Directly Printed Low-Cost Nanoparticle Sensor for Vibration Measurement During Milling Process.” Materials 13 (13): 1–12. doi:10.3390/MA13132920.
  • Moretti, M., A. Rossi, and N. Senin. 2021. “In-Process Monitoring of Part Geometry in Fused Filament Fabrication Using Computer Vision and Digital Twins.” Additive Manufacturing 37 (January): 101609. doi:10.1016/J.ADDMA.2020.101609.
  • Mourtzis, Dimitris. 2020. “Simulation in the Design and Operation of Manufacturing Systems: State of the Art and New Trends.” International Journal of Production Research 58 (7): 1927–1949. doi:10.1080/00207543.2019.1636321.
  • Mourtzis, Dimitris, John Angelopoulos, and Nikos Panopoulos. 2021. “Equipment Design Optimization Based on Digital Twin Under the Framework of Zero-Defect Manufacturing.” Procedia Computer Science 180 (January): 525–533. doi:10.1016/J.PROCS.2021.01.271.
  • Mourtzis, D., S. Fotia, and E. Vlachou. 2017. “Lean Rules Extraction Methodology for Lean PSS Design via Key Performance Indicators Monitoring.” Journal of Manufacturing Systems 42 (January): 233–243. doi:10.1016/J.JMSY.2016.12.014.
  • Moyne, James, and Jimmy Iskandar. 2017. “Big Data Analytics for Smart Manufacturing: Case Studies in Semiconductor Manufacturing.” Processes 5 (3): 39–59. doi:10.3390/PR5030039.
  • Negri, Elisa, Stefano Berardi, Luca Fumagalli, and Marco Macchi. 2020. “MES-Integrated Digital Twin Frameworks.” Journal of Manufacturing Systems 56 (July): 58–71. doi:10.1016/J.JMSY.2020.05.007.
  • Nikolaev, D. V., O. I. Klyavin, A. V. Tarasov, M. V. Aleshin, N. A. Kharaldin, and A. I. Borovkov. 2020. “The Study of the Fatigue Strength Characteristics of Welded Joints in Car Components.” IOP Conference Series: Materials Science and Engineering 986 (1): 012054–012070. doi:10.1088/1757-899X/986/1/012054.
  • Padovano, Antonio, Francesco Longo, Letizia Nicoletti, and Giovanni Mirabelli. 2018. “A Digital Twin Based Service Oriented Application for a 4.0 Knowledge Navigation in the Smart Factory.” IFAC-Papers 51 (11): 631–636. doi:10.1016/J.IFACOL.2018.08.389.
  • Pang, Jihong, Nan Zhang, Quan Xiao, Faqun Qi, and Xiaobo Xue. 2021. “A New Intelligent and Data-Driven Product Quality Control System of Industrial Valve Manufacturing Process in CPS.” Computer Communications 175 (July): 25–34. doi:10.1016/J.COMCOM.2021.04.022.
  • Papacharalampopoulos, Alexios, Panagiotis Stavropoulos, and Demetris Petrides. 2020. “Towards a Digital Twin for Manufacturing Processes: Applicability on Laser Welding.” Procedia CIRP 88 (January): 110–115. doi:10.1016/J.PROCIR.2020.05.020.
  • Pei, Feng Que, Yi Fei Tong, Ming Hai Yuan, Kun Ding, and Xi Hui Chen. 2021. “The Digital Twin of the Quality Monitoring and Control in the Series Solar Cell Production Line.” Journal of Manufacturing Systems 59 (April): 127–137. doi:10.1016/J.JMSY.2021.02.001.
  • Pereverzev, Pavel, Aleksandra Akintseva, and Masar Alsigar. 2018. “Improvement of the Quality of Designed Cylindrical Grinding Cycle with Traverse Feeding Based on the Use of Digital Twin Options.” MATEC Web of Conferences 224 (October): 01033–01037. doi:10.1051/MATECCONF/201822401033.
  • Pereverzev, P. P., A. V. Akintseva, and M. K. Alsigar. 2019. “Designing of Optimal Grinding Cycles, Sustainable to Unstable Mechanical Processing on the Basis of Synthesis of Digital Double Technology, and Dynamic Programming Method.” Lecture Notes in Mechanical Engineering March: 225–232. doi:10.1007/978-3-030-22063-1_25.
  • Pérez, Luis, Silvia Rodríguez-Jiménez, Nuria Rodríguez, Rubén Usamentiaga, and Daniel F. García. 2020. “Digital Twin and Virtual Reality Based Methodology for Multi-Robot Manufacturing Cell Commissioning.” Applied Sciences 10 (10): 3633–3651. doi:10.3390/APP10103633.
  • Pombo, Iñigo, Leire Godino, Jose Antonio Sánchez, and Rafael Lizarralde. 2020. “Expectations and Limitations of Cyber-Physical Systems (CPS) for Advanced Manufacturing: A View from the Grinding Industry.” Future Internet 12 (9): 159–174. doi:10.3390/FI12090159.
  • Psarommatis, Foivos. 2021. “A Generic Methodology and a Digital Twin for Zero Defect Manufacturing (ZDM) Performance Mapping Towards Design for ZDM.” Journal of Manufacturing Systems 59 (April): 507–521. doi:10.1016/j.jmsy.2021.03.021.
  • Psarommatis, F., P. A. Dreyfus, and D. Kiritsis. 2022. “The Role of Big Data Analytics in the Context of Modeling Design and Operation of Manufacturing Systems.” In Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology, 243–275. Elsevier.
  • Psarommatis, Foivos, Gökan May, Paul-Arthur Dreyfus, and Dimitris Kiritsis. 2020a. “Zero Defect Manufacturing: State-of-the-Art Review, Shortcomings and Future Directions in Research.” International Journal of Production Research 7543: 1–17. doi:10.1080/00207543.2019.1605228.
  • Psarommatis, Foivos, Sylvain Prouvost, Gökan May, and Dimitris Kiritsis. 2020b. “Product Quality Improvement Policies in Industry 4 . 0: Characteristics, Enabling Factors, Barriers, and Evolution Toward Zero Defect Manufacturing.” Frontiers in Computer Science 2 (August): 1–15. doi:10.3389/fcomp.2020.00026.
  • Psarommatis, Foivos, João Sousa, Pedro Mendonça, Dimitris Kiritsis, and João Pedro Mendonça. 2021. “Zero-Defect Manufacturing the Approach for Higher Manufacturing Sustainability in the Era of Industry 4.0: A Position Paper.” International Journal of Production Research 60 (1): 73–91. doi:10.1080/00207543.2021.1987551.
  • Qamsane, Yassine, Efe C. Balta, James Moyne, Dawn Tilbury, and Kira Barton. 2019. “Dynamic Rerouting of Cyber-Physical Production Systems in Response to Disruptions Based on SDC Framework.” Proceedings of the American Control Conference 2019-July (July). 3650–3657. doi:10.23919/ACC.2019.8814412.
  • Rausch, Christopher, Ruodan Lu, Saeed Talebi, and Carl Haas. 2021. “Deploying 3D Scanning Based Geometric Digital Twins during Fabrication and Assembly in Offsite Manufacturing.” doi:10.1080/15623599.2021.1896942.
  • Rezaei Aderiani, Abolfazl, Kristina Wärmefjord, and Rikard Söderberg. 2021. “Evaluating Different Strategies to Achieve the Highest Geometric Quality in Self-Adjusting Smart Assembly Lines.” Robotics and Computer-Integrated Manufacturing 71 (October): 102164–102177. doi:10.1016/J.RCIM.2021.102164.
  • Rokka Chhetri, Sujit, Sina Faezi, Arquimedes Canedo, and Mohammad Abdullah Al Faruque. 2019. “QUILT: Quality Inference from Living Digital Twins in IoT-Enabled Manufacturing Systems.” Proceedings of the International Conference on Internet of Things Design and Implementation. New York, NY, USA: ACM. doi:10.1145/3302505.
  • Rožanec, Jože M., Jinzhi Lu, Jan Rupnik, Maja Škrjanc, Dunja Mladenić, Blaž Fortuna, Xiaochen Zheng, and Dimitris Kiritsis. 2021. “Actionable Cognitive Twins for Decision Making in Manufacturing.” doi:10.1080/00207543.2021.2002967.
  • Ruhland, Paul, Yizhou Li, Sven Coutandin, and Jürgen Fleischer. 2021. “Production of Hybrid Tubular Metal-Fibre Preforms: Development of a Digital Twin for the Draping Process.” Procedia CIRP 99: 437–442. doi:10.1016/J.PROCIR.2021.03.062.
  • Sandkuhl, K., and J. Stirna. 2020. “Supporting Early Phases of Digital Twin Development with Enterprise Modeling and Capability Management: Requirements from Two Industrial Cases.” In Enterprise, Business-Process and Information Systems Modeling. Vol. 387, 284–299. doi:10.1007/978-3-030-49418-6_19.
  • Santolamazza, Annalisa, Corrado Groth, Vito Introna, Stefano Porziani, Francesco Scarpitta, Giorgio Urso, Pier Paolo Valentini, et al. n.d. “A Digital Shadow Cloud-Based Application to Enhance Quality Control in Manufacturing.”.
  • Schmidt, Juliana, Fabio Grandi, Margherita Peruzzini, Roberto Raffaeli, and Marcello Pellicciari. 2020. “Novel Robotic Cell Architecture for Zero Defect Intelligent Deburring.” Procedia Manufacturing 51 (January): 140–147. doi:10.1016/J.PROMFG.2020.10.021.
  • Sedighiani, K., M. Diehl, K. Traka, F. Roters, J. Sietsma, and D. Raabe. 2020. “An Efficient and Robust Approach to Determine Material Parameters of Crystal Plasticity Constitutive Laws from Macro-Scale Stress–Strain Curves.” International Journal of Plasticity 134 (November): 102779–102807. doi:10.1016/J.IJPLAS.2020.102779.
  • Serrano-Ruiz, Julio C., Josefa Mula, and Raúl Poler. 2021. “Smart Manufacturing Scheduling: A Literature Review.” Journal of Manufacturing Systems 61 (October): 265–287. doi:10.1016/J.JMSY.2021.09.011.
  • Shafto, Mike, Mike Conroy Rich, Doyle Ed Glaessgen, Chris Kemp, Jacqueline Lemoigne, and Lui Wang. 2010. “DRAFT MoDeling, SiMulATion, InFoRMATion Technology & PRoceSSing RoADMAP Technology Area 11.”.
  • Shahpar, Shahrokh. 2021. “Building Digital Twins to Simulate Manufacturing Variation.” Proceedings of the ASME Turbo Expo 2A-2020 (January), doi:10.1115/GT2020-15263.
  • Shivajee, Veer, Rajesh Kr Singh, and Sanjay Rastogi. 2019. “Manufacturing Conversion Cost Reduction Using Quality Control Tools and Digitization of Real-Time Data.” Journal of Cleaner Production 237 (November): 117678–117691. doi:10.1016/J.JCLEPRO.2019.117678.
  • Söderberg, Rikard, Kristina Wärmefjord, Johan S. Carlson, and Lars Lindkvist. 2017. “Toward a Digital Twin for Real-Time Geometry Assurance in Individualized Production.” CIRP Annals 66 (1): 137–140. doi:10.1016/J.CIRP.2017.04.038.
  • Söderberg, Rikard, Kristina Wärmefjord, Julia Madrid, Samuel Lorin, Anders Forslund, and Lars Lindkvist. 2018. “An Information and Simulation Framework for Increased Quality in Welded Components.” CIRP Annals 67 (1): 165–168. doi:10.1016/J.CIRP.2018.04.118.
  • Sousa, Joao, Artem A. Nazarenko, Jose Ferreira, Hugo Antunes, Elsa Jesus, and Joao Sarraipa. 2021. “Zero-Defect Manufacturing Using Data-Driven Technologies to Support the Natural Stone Industry.” 2021 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), June. IEEE, 1–7. doi:10.1109/ICE/ITMC52061.2021.9570260.
  • Srikonda, Rohit, Ankur Rastogi, and Haavard Oestensen. 2020. “Increasing Facility Uptime Using Machine Learning and Physics-Based Hybrid Analytics in a Dynamic Digital Twin.” Proceedings of the Annual Offshore Technology Conference 2020-May (May). OnePetro. doi:10.4043/30723-MS.
  • Stavropoulos, Panagiotis, and Dimitris Mourtzis. 2022. “Digital Twins in Industry 4.0.” Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology January: 277–316. doi:10.1016/B978-0-12-823657-4.00010-5.
  • Steringer, Robert, Helmut Zörrer, Sebastian Zambal, and Christian Eitzinger. 2019. “Using Discrete Event Simulation in Multiple System Life Cycles to Support Zero-Defect Composite Manufacturing in Aerospace Industry.” Undefined 52 (13): 1467–1472. doi:10.1016/J.IFACOL.2019.11.406.
  • Stieber, Simon, Alwin Hoffmann, Alexander Schiendorfer, Wolfgang Reif, Matthias Beyrle, Jan Faber, Michaela Richter, and Markus Sause. 2020. “Towards Real-Time Process Monitoring and Machine Learning for Manufacturing Composite Structures.” IEEE Symposium on Emerging Technologies and Factory Automation, ETFA 2020-September (September). 1455–1458. doi:10.1109/ETFA46521.2020.9212097.
  • Stojanovic, Nenad, and Dejan Milenovic. 2019. “Data-Driven Digital Twin Approach for Process Optimization: An Industry Use Case.” Proceedings - 2018 IEEE International Conference on Big Data, Big Data 2018, January. 4202–4211. doi:10.1109/BIGDATA.2018.8622412.
  • Su, Shuo, Gang Zhao, Wenlei Xiao, Yiqing Yang, and Xian Cao. 2021. “An Image-Based Approach to Predict Instantaneous Cutting Forces Using Convolutional Neural Networks in End Milling Operation.” International Journal of Advanced Manufacturing Technology 115 (5–6): 1657–1669. doi:10.1007/S00170-021-07156-6.
  • Sun, Xuemin, Jinsong Bao, Jie Li, Yiming Zhang, Shimin Liu, and Bin Zhou. 2020. “A Digital Twin-Driven Approach for the Assembly-Commissioning of High Precision Products.” Robotics and Computer-Integrated Manufacturing 61 (February): 101839. doi:10.1016/J.RCIM.2019.101839.
  • Tabar, Roham Sadeghi, Kristina Wärmefjord, and Rikard Söderberg. 2020b. “A New Surrogate Model–Based Method for Individualized Spot Welding Sequence Optimization with Respect to Geometrical Quality.” International Journal of Advanced Manufacturing Technology 106 (5–6): 2333–2346. doi:10.1007/S00170-019-04706-X/TABLES/2.
  • Tabar, Roham Sadeghi, Kristina Warmefjord, Rikard Soderberg, and Lars Lindkvist. 2020a. “Efficient Spot Welding Sequence Optimization in a Geometry Assurance Digital Twin.” Journal of Mechanical Design, Transactions of the ASME 142 (10): 102001 –102009. doi:10.1115/1.4046436/1074757.
  • Tambare, Parkash, Chandrashekhar Meshram, Cheng Chi Lee, Rakesh Jagdish Ramteke, and Agbotiname Lucky Imoize. 2021. “Performance Measurement System and Quality Management in Data-Driven Industry 4.0: A Review.” Sensors 22 (1): 224–249. doi:10.3390/S22010224.
  • Tao, Fei, Fangyuan Sui, Ang Liu, Qinglin Qi, Meng Zhang, Boyang Song, Zirong Guo, Stephen C.-Y. Lu, and A. Y. C. Nee. 2019. “Digital Twin-Driven Product Design Framework.” International Journal of Production Research 57 (12): 3935–3953. doi:10.1080/00207543.2018.1443229.
  • Templier, Mathieu, and Guy Paré. 2015. “A Framework for Guiding and Evaluating Literature Reviews.” Communications of the Association for Information Systems 37 (1): 112–137. doi:10.17705/1CAIS.03706.
  • Thomé, Antônio Márcio Tavares, Luiz Felipe Scavarda, and Annibal José Scavarda. 2016. “Conducting Systematic Literature Review in Operations Management.” Production Planning & Control 27 (5): 408–420. doi:10.1080/09537287.2015.1129464.
  • Uhlenbrock, Lukas, Christoph Jensch, Martin Tegtmeier, and Jochen Strube. 2020. “Digital Twin for Extraction Process Design and Operation.” Processes 8 (7): 866–892. doi:10.3390/PR8070866.
  • Urbina Coronado, Pedro Daniel, Roby Lynn, Wafa Louhichi, Mahmoud Parto, Ethan Wescoat, and Thomas Kurfess. 2018. “Part Data Integration in the Shop Floor Digital Twin: Mobile and Cloud Technologies to Enable a Manufacturing Execution System.” Journal of Manufacturing Systems 48 (July): 25–33. doi:10.1016/J.JMSY.2018.02.002.
  • Veera Aditya, Yerra, and Pilla Srikanth. 2017. “IIoT-Enabled Production System for Composite Intensive Vehicle Manufacturing on JSTOR.” SAE International Journal of Engines 10 (2): 209–214.
  • Vrana, Johannes, and Ripudaman Singh. 2021. “NDE 4.0—A Design Thinking Perspective.” Journal of Nondestructive Evaluation 40 (1): 1–24. doi:10.1007/S10921-020-00735-9/FIGURES/7.
  • Wagner, Raphael, Benjamin Haefner, Michael Biehler, and Gisela Lanza. 2020. “Digital DNA in Quality Control Cycles of High-Precision Products.” CIRP Annals 69 (1): 373–376. doi:10.1016/J.CIRP.2020.03.020.
  • Wang, Qiyue, Wenhua Jiao, and Yu Ming Zhang. 2020a. “Deep Learning-Empowered Digital Twin for Visualized Weld Joint Growth Monitoring and Penetration Control.” Journal of Manufacturing Systems 57 (October): 429–439. doi:10.1016/J.JMSY.2020.10.002.
  • Wang, Ke, Daxin Liu, Zhenyu Liu, Qide Wang, and Jianrong Tan. 2021. “An Assembly Precision Analysis Method Based on a General Part Digital Twin Model.” Robotics and Computer-Integrated Manufacturing 68 (April): 102089. doi:10.1016/J.RCIM.2020.102089.
  • Wang, Yuchen, Xingzhi Wang, and Ang Liu. 2020b. “Digital Twin-Driven Analysis of Design Constraints.” Procedia CIRP 91 (January): 716–721. doi:10.1016/J.PROCIR.2020.02.229.
  • Wang, K. J., Y. H. Lee, and S. Angelica. 2020c. “Digital Twin Design for Real-Time Monitoring – A Case Study of Die Cutting Machine.” International Journal of Production Research 59 (21): 6471–6485. doi:10.1080/00207543.2020.1817999.
  • Wang, Jinjiang, Lunkuan Ye, Robert X. Gao, Chen Li, and Laibin Zhang. 2018. “Digital Twin for Rotating Machinery Fault Diagnosis in Smart Manufacturing.” International Journal of Production Research 57 (12): 3920–3934. doi:10.1080/00207543.2018.1552032.
  • Wärmefjord, Kristina, Rikard Söderberg, Lars Lindkvist, Björn Lindau, and Johan S. Carlson. 2018. “Inspection Data to Support a Digital Twin for Geometry Assurance.” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2 (January): 58356–58366. doi:10.1115/IMECE2017-70398.
  • Wärmefjord, Kristina, Rikard Söderberg, Benjamin Schleich, and Hua Wang. 2020. “Digital Twin for Variation Management: A General Framework and Identification of Industrial Challenges Related to the Implementation.” Applied Sciences 10 (10): 3342–3358. doi:10.3390/APP10103342.
  • Wei, H. L., F. Q. Liu, W. H. Liao, and T. T. Liu. 2020. “Prediction of Spatiotemporal Variations of Deposit Profiles and Inter-Track Voids During Laser Directed Energy Deposition.” Additive Manufacturing 34 (August): 101219–101230. doi:10.1016/J.ADDMA.2020.101219.
  • Wen-hao, Wu, Chen Guo-bing, Yang Zi-chun -, Qi Zou, Zhixia Hou, Mingyang Wang, and Shan Jiang. 2020. “The Modeling Method of Digital Twin Models for Machining Parts.” IOP Conference Series: Materials Science and Engineering 772 (1): 012003–012015. doi:10.1088/1757-899X/772/1/012003.
  • Wittig, Norman. 2018. Digitalization: Laser Metal Deposition — The Future of Spare Parts and Repairs for Industrial Steam Turbines. Oslo: American Society of Mechanical Engineers Digital Collection. doi:10.1115/GT2018-75066.
  • Xi, Tiandong, Igor Medeiros Benincá, Sebastian Kehne, Marcel Fey, and Christian Brecher. 2021. “Tool Wear Monitoring in Roughing and Finishing Processes Based on Machine Internal Data.” International Journal of Advanced Manufacturing Technology 113 (11–12): 3543–3554. doi:10.1007/S00170-021-06748-6/FIGURES/13.
  • Xiao, Yu, and Maria Watson. 2017. “Guidance on Conducting a Systematic Literature Review.” Journal of planning education and research 39 (1): 93–112. doi:10.1177/0739456X17723971.
  • Xu, Jinghua, Hongsheng Sheng, Shuyou Zhang, Jianrong Tan, and Jinlian Deng. 2021. “Surface Accuracy Optimization of Mechanical Parts with Multiple Circular Holes for Additive Manufacturing Based on Triangular Fuzzy Number.” Frontiers of Mechanical Engineering 16 (1): 133–150. doi:10.1007/S11465-020-0610-6.
  • Yacob, Filmon, Daniel Semere, and Erik Nordgren. 2019. “Anomaly Detection in Skin Model Shapes Using Machine Learning Classifiers.” International Journal of Advanced Manufacturing Technology 105 (9): 3677–3689. doi:10.1007/S00170-019-03794-Z/FIGURES/14.
  • Yan, Xingyu, and Alex Ballu. 2018. “Tolerance Analysis Using Skin Model Shapes and Linear Complementarity Conditions.” Journal of Manufacturing Systems 48 (July): 140–156. doi:10.1016/J.JMSY.2018.07.005.
  • Yu, H. Y., Akinola Ogbeyemi, W. J. Lin, Jingyi He, Wei Sun, and W. J. Zhang. 2021. “A Semantic Model for Enterprise Application Integration in the Era of Data Explosion and Globalisation.” doi:10.1080/17517575.2021.1989495.
  • Zambal, Sebastian, Christian Eitzinger, Michael Clarke, John Klintworth, and Pierre Yves Mechin. 2018. “A Digital Twin for Composite Parts Manufacturing: EEffects of Defects Analysis Based on Manufacturing Data.” Proceedings - IEEE 16th International Conference on Industrial Informatics, INDIN 2018, September. 803–808. doi:10.1109/INDIN.2018.8472014.
  • Zambrano, Valentina, Markus Brase, Belén Hernández-Gascón, Matthias Wangenheim, Leticia A. Gracia, Ismael Viejo, Salvador Izquierdo, and José Ramón Valdés. 2021. “A Digital Twin for Friction Prediction in Dynamic Rubber Applications with Surface Textures.” Lubricants 9 (5): 57–80. doi:10.3390/LUBRICANTS9050057.
  • Zehetner, Christian, Christian Reisinger, Wolfgang Kunze, Franz Hammelmüller, Rafael Eder, Helmut Holl, and Hans Irschik. 2021. “High-Quality Sheet Metal Production Using a Model-Based Adaptive Approach.” Procedia Computer Science 180 (January): 249–258. doi:10.1016/J.PROCS.2021.01.162.
  • Zhang, Meng. 2021. “Digital Twin Data: Methods and Key Technologies | Digital Twin.”.
  • Zhang, Shizheng, Cunfeng Kang, Zhifeng Liu, Juan Wu, and Chunmin Ma. 2020a. “A Product Quality Monitor Model with the Digital Twin Model and the Stacked Auto Encoder.” IEEE Access 8: 113826–113836. doi:10.1109/ACCESS.2020.3003723.
  • Zhang, Chao, Guanghui Zhou, Han Li, and Yan Cao. 2020b. “Manufacturing Blockchain of Things for the Configuration of a Data- And Knowledge-Driven Digital Twin Manufacturing Cell.” IEEE Internet of Things Journal 7 (12): 11884–11894. doi:10.1109/JIOT.2020.3005729.
  • Zhao, Zengya, Sibao Wang, Zehua Wang, Shilong Wang, Chi Ma, and Bo Yang. 2020. “Surface Roughness Stabilization Method Based on Digital Twin-Driven Machining Parameters Self-Adaption Adjustment: A Case Study in Five-Axis Machining.” Journal of Intelligent Manufacturing November: 1–10. doi:10.1007/S10845-020-01698-4/FIGURES/4.
  • Zhao, Xiande, Jinxing Xie, and W. J. Zhang. 2002. “The Impact of Information Sharing and Ordering Co-Ordination on Supply Chain Performance.” Supply Chain Management 7 (1): 24–40. doi:10.1108/13598540210414364/FULL/XML.
  • Zheng, Xiaochen, Jinzhi Lu, and Dimitris Kiritsis. 2021. “The Emergence of Cognitive Digital Twin: Vision, Challenges and Opportunities.” International Journal of Production Research December: 1–23. doi:10.1080/00207543.2021.2014591.
  • Zheng, Xiaochen, Foivos Psarommatis, Pierluigi Petrali, Claudio Turrin, Jinzhi Lu, and Dimitris Kiritsis. 2020. “A Quality-Oriented Digital Twin Modelling Method for Manufacturing Processes Based on A Multi-Agent Architecture.” Procedia Manufacturing 51 (January): 309–315. doi:10.1016/J.PROMFG.2020.10.044.
  • Židek, Kamil, Ján Pitel’, Milan Adámek, Peter Lazorík, and Alexander Hošovskażş. 2020. “Digital Twin of Experimental Smart Manufacturing Assembly System for Industry 4.0 Concept.” Sustainability 12 (9): 3658–3681. doi:10.3390/SU12093658.
  • Zidek, Kamil, Jan Pitel, Ivan Pavlenko, Peter Lazorik, and Alexander Hosovsky. 2020. “Digital Twin of Experimental Workplace for Quality Control with Cloud Platform Support.” EAI/Springer Innovations in Communication and Computing, 135–145. doi:10.1007/978-3-030-34272-2_13.
  • Zörrer, Helmut, Robert Steringer, Sebastian Zambal, and Christian Eitzinger. 2019. “Using Business Analytics for Decision Support in Zero Defect Manufacturing of Composite Parts in the Aerospace Industry.” IFAC-PapersOnLine 52 (13): 1461–1466. doi:10.1016/J.IFACOL.2019.11.405.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.