A multi-objective joint optimisation method for simultaneous part family formation and configuration design in delayed reconfigurable manufacturing system (D-RMS)

References

• Ameer, M., and M. Dahane. 2021. “Reconfigurability Improvement in Industry 4.0: A Hybrid Genetic Algorithm-based Heuristic Approach for a Co-generation of Setup and Process Plans in a Reconfigurable Environment.” Journal of Intelligent Manufacturing, 1–23. https://doi.org/10.1504/IJMR.2021.119633
   Web of Science ®Google Scholar
• Andersen, A.-L., T. D. Brunoe, K. Nielsen, and C. Rösiö. 2017. “Towards a Generic Design Method for Reconfigurable Manufacturing Systems: Analysis and Synthesis of Current Design Methods and Evaluation of Supportive Tools.” Journal of Manufacturing Systems 42: 179–195. https://doi.org/10.1016/j.jmsy.2016.11.006
   Web of Science ®Google Scholar
• Ashraf, M., and F. Hasan. 2015. “Product Family Formation Based on Multiple Product Similarities for a Reconfigurable Manufacturing System.” International Journal of Modelling in Operations Management 5 (3): 247–265. https://doi.org/10.1504/IJMOM.2015.075800
   Google Scholar
• Ashraf, M., and F. Hasan. 2018. “Configuration Selection for a Reconfigurable Manufacturing Flow Line Involving Part Production with Operation Constraints.” The International Journal of Advanced Manufacturing Technology 98 (5-8): 2137–2156. https://doi.org/10.1007/s00170-018-2361-7
   Web of Science ®Google Scholar
• Battaïa, O., A. Dolgui, and N. Guschinsky. 2017. “Decision Support for Design of Reconfigurable Rotary Machining Systems for Family Part Production.” International Journal of Production Research 55 (5): 1368–1385. https://doi.org/10.1080/00207543.2016.1213451
   Web of Science ®Google Scholar
• Battaïa, O., A. Dolgui, and N. Guschinsky. 2020. “Optimal Cost Design of Flow Lines with Reconfigurable Machines for Batch Production.” International Journal of Production Research 58 (10): 2937–2952. https://doi.org/10.1080/00207543.2020.1716092
   Web of Science ®Google Scholar
• Benderbal, H. H., and L. Benyoucef. 2019. “Machine Layout Design Problem Under Product Family Evolution in Reconfigurable Manufacturing Environment: A Two-phase-based AMOSA Approach.” The International Journal of Advanced Manufacturing Technology 104 (1-4): 375–389. https://doi.org/10.1007/s00170-019-03865-1
   Web of Science ®Google Scholar
• Benderbal, H. H., M. Dahane, and L. Benyoucef. 2017. “Flexibility-based Multi-objective Approach for Machines Selection in Reconfigurable Manufacturing System (RMS) Design Under Unavailability Constraints.” International Journal of Production Research 55 (20): 6033–6051. https://doi.org/10.1080/00207543.2017.1321802
   Web of Science ®Google Scholar
• Benderbal, H. H., M. Dahane, and L. Benyoucef. 2018. “Modularity Assessment in Reconfigurable Manufacturing System (RMS) Design: An Archived Multi-Objective Simulated Annealing-based Approach.” The International Journal of Advanced Manufacturing Technology 94 (1-4): 729–749. https://doi.org/10.1007/s00170-017-0803-2
   Web of Science ®Google Scholar
• Bensmaine, A., M. Dahane, and L. Benyoucef. 2013. “A Non-dominated Sorting Genetic Algorithm Based Approach for Optimal Machines Selection in Reconfigurable Manufacturing Environment.” Computers & Industrial Engineering 66 (3): 519–524. https://doi.org/10.1016/j.cie.2012.09.008
   Web of Science ®Google Scholar
• Bortolini, M., F. G. Galizia, and C. Mora. 2018. “Reconfigurable Manufacturing Systems: Literature Review and Research Trend.” Journal of manufacturing systems 49: 93–106. https://doi.org/10.1016/j.jmsy.2018.09.005
   Web of Science ®Google Scholar
• Cerqueus, A., and X. Delorme. 2023. “Evaluating the Scalability of Reconfigurable Manufacturing Systems at the Design Phase.” International Journal of Production Research, 1–14. https://doi.org/10.1080/00207543.2022.2164374
   Web of Science ®Google Scholar
• Chaudhari, P., A. K. Thakur, R. Kumar, N. Banerjee, and A. Kumar. 2022. “Comparison of NSGA-III with NSGA-II for Multi Objective Optimization of Adiabatic Styrene Reactor.” Materials Today: Proceedings 57: 1509–1514. https://doi.org/10.1016/j.matpr.2021.12.047
   Google Scholar
• Cui, Z., Y. Chang, J. Zhang, X. Cai, and W. Zhang. 2019. “Improved NSGA-III with Selection-and-elimination Operator.” Swarm and Evolutionary Computation 49: 23–33. https://doi.org/10.1016/j.swevo.2019.05.011
   Web of Science ®Google Scholar
• Dolgui, A., and J.-M. Proth. 2008. “RFID Technology in Supply Chain Management: State of the Art and Perspectives.” IFAC Proceedings Volumes 41 (2): 4464–4475. https://doi.org/10.3182/20080706-5-KR-1001.00753
   Google Scholar
• Dolgui, A., and J.-M. Proth. 2010. “X-manufacturing Systems.” In Supply Chain Engineering: Useful Methods and Techniques, edited by A. Dolgui and J.-M. Proth, 195–236. London: Springer.
   Google Scholar
• Dolgui, A., and J. M. Proth. 2011, March. A Survey on RFID Technology and its Impact on Enterprises. In 12ème congrès de la société Française de Recherche Opérationnelle et d'Aide à la Décision (ROADEF 2011) (pp. submission-472).
   Google Scholar
• Dorneanu, B., S. Zhang, H. Ruan, M. Heshmat, R. Chen, V. S. Vassiliadis, and H. Arellano-Garcia. 2022. “Big Data and Machine Learning: A Roadmap Towards Smart Plants.” Frontiers of Engineering Management 9: 623–639. https://doi.org/10.1007/s42524-022-0218-0.
   Web of Science ®Google Scholar
• Dou, J., J. Li, and C. Su. 2016. “Bi-objective Optimization of Integrating Configuration Generation and Scheduling for Reconfigurable Flow Lines Using NSGA-II.” The International Journal of Advanced Manufacturing Technology 86 (5-8): 1945–1962. https://doi.org/10.1007/s00170-015-8291-8
   Web of Science ®Google Scholar
• Dou, J., J. Li, D. Xia, and X. Zhao. 2021. “A Multi-objective Particle Swarm Optimisation for Integrated Configuration Design and Scheduling in Reconfigurable Manufacturing System.” International Journal of Production Research 59 (13): 3975–3995. https://doi.org/10.1080/00207543.2020.1756507.
   Web of Science ®Google Scholar
• Garcia, H., and J. M. Proth. 1985. “Group Technology in Production Management: The Short Horizon Planning Level.” Applied Stochastic Models and Data Analysis 1 (1): 25–34. https://doi.org/10.1002/asm.3150010105
   Google Scholar
• Gauss, L., D. P. Lacerda, and M. A. Sellitto. 2019. “Module-based Machinery Design: A Method to Support the Design of Modular Machine Families for Reconfigurable Manufacturing Systems.” The International Journal of Advanced Manufacturing Technology 102 (9-12): 3911–3936. https://doi.org/10.1007/s00170-019-03358-1
   Web of Science ®Google Scholar
• Goyal, K. K., P. K. Jain, and M. Jain. 2012. “Optimal Configuration Selection for Reconfigurable Manufacturing System Using NSGA II and TOPSIS.” International Journal of Production Research 50 (15): 4175–4191. https://doi.org/10.1080/00207543.2011.599345
   Web of Science ®Google Scholar
• Goyal, K. K., P. K. Jain, and M. Jain. 2013. “A Comprehensive Approach to Operation Sequence Similarity Based Part Family Formation in the Reconfigurable Manufacturing System.” International Journal of Production Research 51 (6): 1762–1776. https://doi.org/10.1080/00207543.2012.701771
   Web of Science ®Google Scholar
• Guo, J., Y. Cheng, D. Wang, F. Tao, and S. Pickl. 2021. “Industrial Dataspace for Smart Manufacturing: Connotation, Key Technologies, and Framework.” International Journal of Production Research 61 (12): 3868–3883. https://doi.org/10.1080/00207543.2021.1955996.
   Web of Science ®Google Scholar
• Hasan, F., P. K. Jain, and D. Kumar. 2014. “Optimum Configuration Selection in Reconfigurable Manufacturing System Involving Multiple Part Families.” Opsearch 51 (2): 297–311. https://doi.org/10.1007/s12597-013-0146-1
   Google Scholar
• He, X., S. Dong, and N. Zhao. 2020. “Research on Rush Order Insertion Rescheduling Problem Under Hybrid Flow Shop Based on NSGA-III.” International journal of production research 58 (4): 1161–1177. https://doi.org/10.1080/00207543.2019.1613581
   Web of Science ®Google Scholar
• Hilger, J., G. Harhalakis, and J. M. Proth. 1989. “Generalization and Implementation of the GP Method to Generate Manufacturing Cell and Part Families”.
   Google Scholar
• Huang, S., G. Wang, D. Lei, and Y. Yan. 2022. “Toward Digital Validation for Rapid Product Development Based on Digital Twin: A Framework.” The International Journal of Advanced Manufacturing Technology 119 (3): 2509–2523. https://doi.org/10.1007/s00170-021-08475-4
   Web of Science ®Google Scholar
• Huang, S., B. Wang, X. Li, P. Zheng, D. Mourtzis, and L. Wang. 2022. “Industry 5.0 and Society 5.0—Comparison, Complementation and Co-evolution.” Journal of Manufacturing Systems 64: 424–428. https://doi.org/10.1016/j.jmsy.2022.07.010
   Web of Science ®Google Scholar
• Huang, S., G. Wang, S. Nie, B. Wang, and Y. Yan 2022. “Part Family Formation Method for Delayed Reconfigurable Manufacturing System Based on Machine Learning.” Journal of Intelligent Manufacturing 34: 2849–2863. https://doi.org/10.1007/s10845-022-01956-7.
   Web of Science ®Google Scholar
• Huang, S., G. Wang, and Y. Yan. 2019. “Delayed Reconfigurable Manufacturing System.” International Journal of Production Research 57 (8): 2372–2391. https://doi.org/10.1080/00207543.2018.1518605
   Web of Science ®Google Scholar
• Huang, S., and Y. Yan. 2019. “Part Family Grouping Method for Reconfigurable Manufacturing System Considering Process Time and Capacity Demand.” Flexible Services and Manufacturing Journal 31 (2): 424–445. https://doi.org/10.1007/s10696-018-9322-1
   Web of Science ®Google Scholar
• Huang, S., and Y. Yan. 2020. “Design of Delayed Reconfigurable Manufacturing System Based on Part Family Grouping and Machine Selection.” International Journal of Production Research 58 (14): 4471–4488. https://doi.org/10.1080/00207543.2019.1654631
   Web of Science ®Google Scholar
• Ishibuchi, H., R. Imada, Y. Setoguchi, and Y. Nojima 2016. “Performance Comparison of NSGA-II and NSGA-III on Various Many-objective Test Problems.” In 2016 IEEE Congress on Evolutionary Computation (CEC), Vancouver, BC, Canada, 3045–3052. IEEE.
   Google Scholar
• Khettabi, I., L. Benyoucef, and M. Amine Boutiche. 2022. “Sustainable Multi-objective Process Planning in Reconfigurable Manufacturing Environment: Adapted New Dynamic NSGA-II vs New NSGA-III.” International Journal of Production Research 60 (20): 6329–6349. https://doi.org/10.1080/00207543.2022.2044537.
   Web of Science ®Google Scholar
• Ko, J., and S. Jack Hu. 2008. “Balancing of Manufacturing Systems with Complex Configurations for Delayed Product Differentiation.” International Journal of Production Research 46 (15): 4285–4308. https://doi.org/10.1080/00207540601078047
   Web of Science ®Google Scholar
• Koren, Y. 2013. “The Rapid Responsiveness of RMS.” International Journal of Production Research 51 (23-24): 6817–6827. https://doi.org/10.1080/00207543.2013.856528
   Web of Science ®Google Scholar
• Koren, Y., X. Gu, and W. Guo. 2018. “Reconfigurable Manufacturing Systems: Principles, Design, and Future Trends.” Frontiers of Mechanical Engineering 13 (2): 121–136. https://doi.org/10.1007/s11465-018-0483-0
   Web of Science ®Google Scholar
• Koren, Y., W. Wang, and X. Gu. 2017. “Value Creation Through Design for Scalability of Reconfigurable Manufacturing Systems.” International Journal of Production Research 55 (5): 1227–1242. https://doi.org/10.1080/00207543.2016.1145821
   Web of Science ®Google Scholar
• Kusiak, A. 2018. “Smart Manufacturing.” International Journal of Production Research 56 (1-2): 508–517. https://doi.org/10.1080/00207543.2017.1351644
   Web of Science ®Google Scholar
• Lasi, H., P. Fettke, H.-G. Kemper, T. Feld, and M. Hoffmann. 2014. “Industry 4.0.” Business & Information Systems Engineering 6 (4): 239–242. https://doi.org/10.1007/s12599-014-0334-4
   Web of Science ®Google Scholar
• Lin, Y.-K., P.-C. Chang, L. C.-L. Yeng, and S.-F. Huang. 2019. “Bi-objective Optimization for a Multistate Job-shop Production Network Using NSGA-II and TOPSIS.” Journal of Manufacturing Systems 52: 43–54. https://doi.org/10.1016/j.jmsy.2019.05.004
   Web of Science ®Google Scholar
• Liu, J., P. Zhao, X. Jing, X. Cao, S. Sheng, H. Zhou, X. Liu, and F. Feng. 2022. “Dynamic Design Method of Digital Twin Process Model Driven by Knowledge-Evolution Machining Features.” International Journal of Production Research 60 (7): 2312–2330. https://doi.org/10.1080/00207543.2021.1887531
   Web of Science ®Google Scholar
• Lu, Y., C. Liu, I. Kevin, K. Wang, H. Huang, and X. Xu. 2020. “Digital Twin-driven Smart Manufacturing: Connotation, Reference Model, Applications and Research Issues.” Robotics and Computer-Integrated Manufacturing 61: 101837. https://doi.org/10.1016/j.rcim.2019.101837
   Web of Science ®Google Scholar
• Mariani, M. M., and M. Borghi. 2023. “Artificial Intelligence in Service Industries: Customers’ Assessment of Service Production and Resilient Service Operations.” International Journal of Production Research, 1–17. https://doi.org/10.1080/00207543.2022.2160027
   Web of Science ®Google Scholar
• Merhi, M. I., and A. Harfouche. 2023. “Enablers of Artificial Intelligence Adoption and Implementation in Production Systems.” International Journal of Production Research, 1–15. https://doi.org/10.1080/00207543.2023.2167014
   Web of Science ®Google Scholar
• Moghaddam, S. K., M. Houshmand, and O. Fatahi Valilai. 2018. “Configuration Design in Scalable Reconfigurable Manufacturing Systems (RMS); a Case of Single-Product Flow Line (SPFL).” International Journal of Production Research 56 (11): 3932–3954. https://doi.org/10.1080/00207543.2017.1412531
   Web of Science ®Google Scholar
• Moghaddam, S. K., M. Houshmand, K. Saitou, and O. Fatahi Valilai. 2020. “Configuration Design of Scalable Reconfigurable Manufacturing Systems for Part Family.” International Journal of Production Research 58 (10): 2974–2996. https://doi.org/10.1080/00207543.2019.1620365
   Web of Science ®Google Scholar
• Nagi, R., G. Harhalakis, and J.-M. Proth. 1990. “Multiple Routeings and Capacity Considerations in Group Technology Applications.” The International Journal of Production Research 28 (12): 1243–1257. https://doi.org/10.1080/00207549008942864
   Web of Science ®Google Scholar
• Napoleone, A., E. Negri, M. Macchi, and A. Pozzetti. 2022. “How the Technologies Underlying Cyber-physical Systems Support the Reconfigurability Capability in Manufacturing: A Literature Review.” International Journal of Production Research 61 (9): 3122–3144. https://doi.org/10.1080/00207543.2022.2074323.
   Web of Science ®Google Scholar
• Nti, I. K., A. F. Adekoya, B. A. Weyori, and O. Nyarko-Boateng. 2021. “Applications of Artificial Intelligence in Engineering and Manufacturing: A Systematic Review.” Journal of Intelligent Manufacturing 33 (6): 1581–1601. https://doi.org/10.1007/s10845-021-01771-6.
   Web of Science ®Google Scholar
• Pal Singh, P., J. Madan, and H. Singh. 2020. “Composite Performance Metric for Product Flow Configuration Selection of Reconfigurable Manufacturing System (RMS).” International Journal of Production Research 59 (13): 3996–4016. https://doi.org/10.1080/00207543.2020.1756511.
   Web of Science ®Google Scholar
• Pereira, J. L. J., G. A. Oliver, M. B. Francisco, S. S. Cunha, and G. F. Gomes 2021. “A Review of Multi-objective Optimization: Methods and Algorithms in Mechanical Engineering Problems.” Archives of Computational Methods in Engineering 29: 2285–2308. https://doi.org/10.1007/s11831-021-09663-x.
   Web of Science ®Google Scholar
• Puik, E., D. Telgen, L. van Moergestel, and D. Ceglarek. 2017. “Assessment of Reconfiguration Schemes for Reconfigurable Manufacturing Systems Based on Resources and Lead Time.” Robotics and Computer-Integrated Manufacturing 43: 30–38. https://doi.org/10.1016/j.rcim.2015.12.011
   Web of Science ®Google Scholar
• Shang, X., J. Milisavljevic-Syed, S. Huang, G. Wang, J. K. Allen, and F. Mistree. 2021. “A Key Feature-based Method for the Configuration Design of a Reconfigurable Inspection System.” International Journal of Production Research 59 (9): 2611–2623. https://doi.org/10.1080/00207543.2020.1735664
   Web of Science ®Google Scholar
• Shivdas, R., and S. Sapkal. 2023. “Proposed Composite Similarity Metric Method for Part Family Formation in Reconfigurable Manufacturing System.” The International Journal of Advanced Manufacturing Technology 125 (5–6): 2535–2548. https://doi.org/10.1007/s00170-023-10849-9.
   Web of Science ®Google Scholar
• Souier, M., M. Dahane, and F. Maliki. 2019. “An NSGA-II-based Multiobjective Approach for Real-time Routing Selection in a Flexible Manufacturing System Under Uncertainty and Reliability Constraints.” The International Journal of Advanced Manufacturing Technology 100 (9-12): 2813–2829. https://doi.org/10.1007/s00170-018-2897-6
   Web of Science ®Google Scholar
• Su, C., and Y. Liu. 2020. “Multi-objective Imperfect Preventive Maintenance Optimisation with NSGA-II.” International Journal of Production Research 58 (13): 4033–4049. https://doi.org/10.1080/00207543.2019.1641237
   Web of Science ®Google Scholar
• Tao, F., Q. Qi, A. Liu, and A. Kusiak. 2018. “Data-driven Smart Manufacturing.” Journal of Manufacturing Systems 48: 157–169. https://doi.org/10.1016/j.jmsy.2018.01.006
   Web of Science ®Google Scholar
• Touzout, F. A., and L. Benyoucef. 2019. “Multi-objective Sustainable Process Plan Generation in a Reconfigurable Manufacturing Environment: Exact and Adapted Evolutionary Approaches.” International Journal of Production Research 57 (8): 2531–2547. https://doi.org/10.1080/00207543.2018.1522006
   Web of Science ®Google Scholar
• Wang, G. X., S. H. Huang, Y. Yan, and J. J. Du. 2017. “Reconfiguration Schemes Evaluation Based on Preference Ranking of Key Characteristics of Reconfigurable Manufacturing Systems.” The International Journal of Advanced Manufacturing Technology 89 (5-8): 2231–2249. https://doi.org/10.1007/s00170-016-9243-7
   Web of Science ®Google Scholar
• Yelles-Chaouche, A. R., E. Gurevsky, N. Brahimi, and A. Dolgui. 2020. “Reconfigurable Manufacturing Systems From an Optimisation Perspective: A Focused Review of Literature.” International Journal of Production Research 59 (21): 6400–6418. https://doi.org/10.1080/00207543.2020.1813913.
   Web of Science ®Google Scholar
• Yin, Y., F. Chu, A. Dolgui, T. C. E. Cheng, and M. C. Zhou. 2022. “Big Data Analytics in Production and Distribution Management.” International Journal of Production Research 60 (22): 6682–6690. https://doi.org/10.1080/00207543.2022.2130589
   Web of Science ®Google Scholar
• Zhang, J., M. Söpper, and F. Holzapfel. 2021. “Attainable Moment Set Optimization to Support Configuration Design: A Required Moment Set Based Approach.” Applied Sciences 11 (8): 3685. https://doi.org/10.3390/app11083685
   Google Scholar
• Zhong, R. Y., X. Xu, E. Klotz, and S. T. Newman. 2017. “Intelligent Manufacturing in the Context of Industry 4.0: A Review.” Engineering 3 (5): 616–630. https://doi.org/10.1016/J.ENG.2017.05.015
   Web of Science ®Google Scholar
• Zhou, J., S. Zhang, and M. Gu. 2022. “Revisiting Digital Twins: Origins, Fundamentals, and Practices.” Frontiers of Engineering Management 9: 668–676. https://doi.org/10.1007/s42524-022-0216-2.
   Web of Science ®Google Scholar
• Zhou, G., C. Zhang, Z. Li, K. Ding, and C. Wang. 2020. “Knowledge-driven Digital Twin Manufacturing Cell Towards Intelligent Manufacturing.” International Journal of Production Research 58 (4): 1034–1051. https://doi.org/10.1080/00207543.2019.1607978
   Web of Science ®Google Scholar
• Zhu, Q., S. Huang, G. Wang, S. K. Moghaddam, Y. Lu, and Y. Yan. 2022. “Dynamic Reconfiguration Optimization of Intelligent Manufacturing System with Human-robot Collaboration Based on Digital Twin.” Journal of Manufacturing Systems 65: 330–338. https://doi.org/10.1016/j.jmsy.2022.09.021
   Web of Science ®Google Scholar