References
- ALBRECHT. P., 1965 . Dynamics of metal cutting process, Transactions of the ASM E, Journal of Engineering for Industry , 87 , 429 .
- ARNOLD , R. N. , 1946 , The mechanism of tool vibration in cutting steel , Proceedings of the Institute of Mechanical Engineers , 154 , 261 .
- BOOTHROYD , G. , 1975 , Fundamentals of Metal Machining and Machine Tools ( McGraw Hill ).
- KAINTH , G. S. , 1970 , Dynamics of metal cutting process , Sixth A1MTDR proceedings , 249 .
- KOBAYASHl,S.,and THOMSEN , E. G. , 1959 , Some observations of the shearing process in metal cutting , Transactions of Ike ASME, Journal of Engineering for Industry , 81 , 251 .
- KRONENBERG , M. , 1961 , Machining Science and Application ( Pergamon Press ).
- MARGOS , S. K. , 1973 , Measurement and modelling of the cutting force fluctuations during machining . Mechanical Engineering Thesis, Sir George Williams University, Montreal .
- MERCHANT , M.E. , 1945 , Mechanics of the cutting process , Journal of Applied Physics , 16 , p267 p.
- OKUSIUMA , K. , and HITOMI , K. , 1961 , An analysis to the mechanics of orthogonal cutting and its application to discontinuous chip formation , Transactions of the ASME, Journal of Engineering for Industry , 83 , 545 ,
- OSMAN, M. 0. M., 1975 , The BTA technique–fast hole machining , Tooling and Production,February , 49 .
- OSMAN,M. 0. M.,and LATINOVIC , V. , 1976 , On the development of multiedge cutting tools for BTA deep hole machining , Transactions of the ASME, Journal of Engineering for Industry , 98 , 474 .
- OSMAN, M. 0. M., XISTRIS , C. D. ,CHAIIIL, G, S., 1979 , The measurement and stochastic modelling of torque and thrust in twist drilling , International Journal of Production Research , 17 , 359 .
- OXFORD. G. J. JR., 1957 , Some experiments on the influence of various factors in drill performance , Transactions of the ASME , 225 .
- PALMER , N. B. ,and OXLEY,P. L. B., 1959 , Mechanics of orthogonal machining , Proceedings of the Institute of Mechanical Engineering , 173 , 623 .
- RAKUIT. A. K., SANKAR, T.S.and OSMAN, M. 0. M. 1973 . The effect of stochastic response of machine tool–workpiece on the formation of surface texture in twining . ASME Vibration Conference , Cincinnati .
- SAKUMA , K. , TAGUCHI , K. , and KINGO , S. , 1978 , Study on deep hole drilling with solid boring tools–The effect of tool material on the cutting performances , Bulletin ofthe JSME , 21 , 532 .
- SAKUMA , K. , TAGUCHI , K. , and KATSUKI , A. , 1980 , Study on deep hole drilling with solid boring tools–The burnishing action of guide pads and their influence on hole accuracy , Bulletin of the JSME , 23 , 1921 .
- SWINEHART , H. J. , 1967 , Gundrilling, Trepanning and Deep hole machining . ASTME , Dearborn , Michigan .
- WILLIAMS , R. A. , 1969 . Dynamic geometry of a twist drill . International Journal of Production Research . 7 , 253 .
- ZOKKV , N. N. , 1966 , Metal Gutting Mechanics ( Pergamon Press ).