The Total Source Error of Adjustment model: A methodology for the elimination of setup and process adjustment

REFERENCES

• ANSI/ASME B5.50-1985 , 1985 , ‘V’ Flange Tool Shanks for Machining Centers with Automatic Tool Changers . ( New York The American Society of Mechanical Engineers ).
   Google Scholar
• DEGARMO , E. , BLACK , J. T. , and KOHSER , R. , 1988 , Materials and Processes in Manufacturing ( New York Macmillan Publishing Co. )
   Google Scholar
• DEUTSCHMANN , A. D. , MICHELS , W. J. , and WILSON , C. E. , 1975 , Machine Design Theory and Practice ( New York Macmillan Publishing Co. ).
   Google Scholar
• GALA , K. , and WILSON , W. P. , 1984 , Closed Loop Control of Machining . Second Biennial International Machine Tool Technical Conference , McLean , VA , pp. 89 – 101 .
   Google Scholar
• JANEZCKO , J. , 1986 , Touch Probe Calibration and Measurement in CNC Machining Centers. Technical Paper , Society of Manufacturing Engineers, Publication Number IQ86-908 .
   Google Scholar
• MCKEOWN , P. A. , 1985 , High Precision Manufacturing and the British Economy . Proceedings of the Institute of Mechanical Engineers , 200 .
   Google Scholar
• MONDEN , Y. , 1983 , Toyota Production System ( Norcross , GA HE Press ).
   Google Scholar
• MONTGOMERY , D. , 1985 Introduction to Statistical Quality Control ( New York John Wiley and Sons ).
   Google Scholar
• SHINGO , S. , 1989 The Study of Toyota Production Systemfrom an Industrial Engineering Viewpoint ( Cambridge , MA Productivity Press ).
   Google Scholar
• SHINGO , S. , 1985 , A Revolution in Manufacturing The SMED System ( Cambridge , MA HE Productivity Press ).
   Google Scholar
• SHINGO , S. , 1987 , The Sayings of Shigeo Shingo Key Strategies for Plant Improvement ( Cambridge , MA HE Productivity Press ).
   Google Scholar
• SHINGO , S. , 1988 , Non-Stock Production Shingo System for Continuous Improvement ( Cambridge , MA HE Productivity Press ).
   Google Scholar
• SHINGO , S. , 1988 , Zero Quality Control Source Inspection and the Poka-yoke System ( Cambridge , MA HE Productivity Press ).
   Google Scholar
• WRIGHT , P. K. , and BOURNE , D. A. , 1988 Manufacturing Intelligence ( Reading , MA Addison-Wesley ).
   Google Scholar
• AFT , S. , 1988 , Quality Improvement Using Statistical Process Control ( Orlando , F Technology Publications , Harcourt Brace Jovanovich ).
   Google Scholar
• BATYROV , U. D. , 1984 , Factors Affecting Setting Errors of Pallet Fixtures . Soviet Engineering Research , 4 , ( 4 ), 67 – 69 , April .
   Web of Science ®Google Scholar
• BLACK , J. T. , 1987 , Integrated Manufacturing Production Systems . Autofact Conference Proceedings , November .
   Google Scholar
• BLACK , J. T. , 1988 , The Design of Manufacturing Cells (Step One to Integrated Manufacturing Systems) . Proceedings of Manufacturing International 1988 , 111 , New York , pp. 143 – 157 .
   Google Scholar
• CHANG , C. H. , 1988 , Automatic Monitoring NC Machine Tool Errors with Electronic Surface-Sensing Probe . Proceedings of Manufacturing International 1988 , 1 , New York , pp. 333 – 344 .
   Google Scholar
• CINCINNATI MILACRON. , 1984 , Programming Manual for NC Machining Center with Acramatic 900MC , Publication No.l-MC-87209 .
   Google Scholar
• CINCINNATI MILACRON. , 1984 , Telemetry Probe Operating Manual , Publication No. 1-MC-84130 .
   Google Scholar
• DIXON , B. C. ,LE ROUX , L. M. , 1987 , In-Process Gauging on Machining Centers and Lathes Using Electronic Touch Probes . |jtFWP Journal|bt, 27 ( 3 ), pp. 17 – 24 , March.
   Google Scholar
• ELSAYED , A. E. , 1985 , Analysis and Control of Productions Systems ( Englewood Cliffs , NJ Prentice-Hall ).
   Google Scholar
• GERSHWIN, S. B. el al., 1984 , A Control Theorist's Perspective on Recent Trends in Manufacturing Systems . Proceedings on the 23rd Conference on Decision and Control , Las Vegas , NV , pp. 200 – 223 , December .
   Google Scholar
• GIDUINGSLEWIS Inc. , 1988 , Programming Instruction Manual with NumeriPath 8000M Computer Numerical Control , Part Number 108-24011-05 .
   Google Scholar
• GIUSTI, F et al, 1984 , Flexible Tool Wear Sensors for NC Lathes . Annals of the CIRP , 33 , ( 1 ), 229 – 232 .
   Google Scholar
• HAXBY, C, 1986 , Automated Manufacture for Turning-A Step by Step Approach . Planning for Automated Manufacture Conference ( Bury St. Edmunds Mechanical Engineering Publications Ltd ), pp. 23 – 26 .
   Google Scholar
• HAYASHI, S. R. et al, 1986 , Automatic Tool Touch and Breakage Detection in Turning . International Journal of Material Production Technology , 1 , ( 1 ) 115 – 129 , July .
   Google Scholar
• HAZEN , F. B. , and WRIGHT , P. K. , 1988 , Autonomous Fixture Loading by a Machine Tool . Proceedings of Manufacturing International 1988 , 1 , New York , pp. 105 – 111 .
   Google Scholar
• HERMANN , G. , 1983 , In-Process Measurement of Workpieces and Tools . Technical Paper, Society of Manufacturing Engineers, Publication No. MS83-500 .
   Google Scholar
• HERMANN , G. , 1985 , Process Intermittent Measurement of Tools and Workpieces . Journal of Manufacturing Systems , 4 , ( 1 ), 41 – 49 .
   Web of Science ®Google Scholar
• HITOMI , K. , 1979 , Manufacturing Systems Engineering ( London Taylor & Francis ).
   Google Scholar
• HOSCHKA , J. , 1987 , In-Process Measurement of Tools and Workpieces . Energy Automation , 9 , 24 – 27 , October.
   Google Scholar
• IWATA , K. , 1982 , Development of Modular-Type Measuring System for Evaluation of Machining Accuracy . Annals of the CIRP , 31 , ( 1 ), 421 – 126 .
   Google Scholar
• KNAPP , W. , 1983 , Test of the Three- Dimensional Uncertainty of Machine Tools and Measuring Machines and its Relation to the Machine Errors . Annals of the CIRP , 32 , ( 1 ), 459 – 464 .
   Google Scholar
• KOREN , Y. , 1983 , Computer Control of Manufacturing Systems ( New York McGraw-Hill ).
   Google Scholar
• Lu , J. , 1982 , Two Dimensional Tracing and Measurement Using Touch Trigger Probe . Annals of the CIRP , 31 ,( 1 ), 415 – 419 .
   Google Scholar
• NEVEL'SON , M. S. , and MUSTAFEV , E. , 1985 , Current Estimation of Tool Wear. In Unmanned Machines . Measurement Techniques (English Translation of IzmeritePnaya) 28 , ( 6 ), 476 – 479 , June .
   Web of Science ®Google Scholar
• NIMPHIUS , J. , 1983 , Block Tool System-Key for Conventional and Unmanned Manufacturing . Technical Paper Society of Manufacturing Engineers, Publication No. MR83-232|pp .
   Google Scholar
• Renishaw Metrology Inc. , 1987 , MP-8 Touch Trigger Probe Specifications . Renishaw Metrology , Schaumburg , IL , USA .
   Google Scholar
• Renishaw Metrology Inc. , 1988 , Data Sheet LPO-h/2000/2270/B. Renishaw Metrology , Schaumburg , IL , USA .
   Google Scholar
• ROE , J. M. , 1984 , In-Cycle Gauging . Technical Paper Society of Manufacturing Engineers, Publication No. IQ84–263 .
   Google Scholar
• ROEDER , T. , 1987 , Closed Loop Machiningon Machine Inspection System Feasibility Study and Demonstration . Proceedings of the Association for Integrated Manufacturing (AIM) Technology Conference , Beloit , WI , USA , pp. 120 – 125 .
   Google Scholar
• Statistical AccuracyRepeatability Testing on Machine Tool Linear Axes , 1980 , Publication QCS No. 3 (excerpt from the Quality Assurance Standards Manual), Giddings and Lewis Machine Tool Inc. , Fond du Lac , WI .
   Google Scholar
• SIM , J. , 1984 , In Process Computer Control . Second Biennial International Machine Tool Technical Conference , 4 , McLean , VA , USA , pp. 101 – 108 .
   Google Scholar
• Stocktess Production ., 1984 , Hewlett-Packard Co. , Greeley , CO , USA (videotape) .
   Google Scholar
• SCHONBERGER , R. J. , 1982 , Japanese Manufacturing Techniques ( New York Free Press ).
   Google Scholar
• TAGUCHI , G. , 1985 , Design of Experiments-The Taguchi Way . Manufacturing Engineering , 44 – 47 , May .
   Google Scholar
• VITULLO , R. E. , 1984 , Process Automation for CNC Machine Tools . Second Biennial International Machine Tool Technical Conference , 3 , McLean , VA , USA , pp. 109 – 118 .
   Google Scholar
• WAGNER , J. F. , 1985 , Intelligent Metrology Systems for Automation and Robotics . Proceedings of the National Society of Manufacturing and Production Engineering (SAMPE) Symposium and Exhibition , 30 , pp. 843 – 854 .
   Google Scholar
• WOLF , W. , 1984 , Block Tool System Fulfills the Tooling Requirement for Unattended Turning . Technical Paper Society of Manufacturing Engineers, Publication No. MS84-235 .
   Google Scholar