A knowledge based multi-level modelling system for the design of flexible machining facilities

REFERENCES

• ALLA , H. , and LADET , P. , 1986 , Coloured Petri nets A tool for modelling, validation and simulation of FMS . Flexible Manufacturing Systems Methods and Studies , edited by A. Kusiak ( North-Holland Elsevier Science Publishers B.V .).
   Google Scholar
• ANON., 1985 , Discussion on AI guidance in modelling and simulation . AI Applied to Simulation , edited by E. Kerckhoffs et al, Simulation Series , 18 ( 1 ), 201 – 202 .
   Google Scholar
• ARNAUDO , O. , and BLOCHE , E. , 1986 , Evaluating FMS by simulation . Proceedings of the 5th International Conference on Flexible Manufacturing Systems , pp. 513 – 533 .
   Google Scholar
• ARTIFICIAL INTELLIGENCE LTD., 1988 , STEM User Guide ( Watford Artificial Intelligence Ltd ).
   Google Scholar
• BELL , R. , ROBERTS , E. A. , SHIRES , N. , NEWMAN , S. T. , and KHANOLKAR , R. , 1984 , A system for the design and evaluation of highly automated batch manufacturing systems . Proceedings of the 4th Conference on U K Research in Advanced Manufacture, I Mech E , London , pp. 85 – 93 .
   Google Scholar
• BEN-ARIEH , D. , 1986 , A knowledge based system for simulation and control of a CIM . Proceedings of the 2nd International Conference on Simulation in Manufacturing , pp. 13 – 21 .
   Google Scholar
• CACI LTD., 1987 , A Quick Look at SIM FACTORY with Animation , publicity document ( Surrey CACI Ltd ).
   Google Scholar
• CARRIE , A. , 1985 , FMS simulation needs, experience, facilities . Proceedings 1st International Conference on Simulation in Manufacturing , pp. 205 – 215 .
   Google Scholar
• DALLERY , Y. , and DAVID , R. , 1983 , A new approach based on operational analysis for flexible manufacturing systems performance evaluation . Proceedings of the 22nd IEEE Conference on Decision and Control , pp. 1056 – 1061 .
   Google Scholar
• DE SOUZA , R. B. R. , 1988 , The Management of Tool Flows in Highly Automated Batch Manufacturing Systems . Ph.D. Thesis , Loughborough University of Technology .
   Google Scholar
• DOUKIDIS , G. I. , 1987 , An anthology on the homology of simulation with artificial intelligence . Journal of the Operational Research Society , 38 ( 8 ), 701 – 712 .
   Web of Science ®Google Scholar
• DOUMEINGTS , G. , DARRICAU , D. , BERARD , C. , and ROBOAM , M. , 1987 , Design of advanced manufacturing systems using AI techniques . Proceedings of the IXth ICPR , Cincinnati .
   Google Scholar
• ELZAS , M. S. , 1986 , Relations between artificial intelligence environments and modelling and simulation support systems . Modelling and Simulation Methodology in the Artificial Intelligence Era , edited by M. S. Elzas, T. I. Oren and B. P. Zeigier ( North-Holland Elsevier Science Publishers B.V .), pp. 61 – 77 .
   Google Scholar
• FAUGHT , W. S. , 1986 , Applications of AI in engineering . IEEE Computer , 19 ( 7 ), 17 – 27 .
   Google Scholar
• FLITMAN , A. M. , and HURRION , R. D. , 1987 , Linking discrete-event simulation models with expert systems . Journal of Operational Research Society , 38 ( 8 ), 723 – 733 .
   Web of Science ®Google Scholar
• Ho , Y. C. , and CAO , X. , 1985 , A survey of the perturbation analysis of discrete event dynamic systems . Annals of Operations Research , 3 , 393 – 402 .
   Google Scholar
• ISTEL LTD ., 1986 , WITNESS-Product Overview , publicity document ( Reddith Istel Ltd ).
   Google Scholar
• KEARNEY AND TRECKER CORPORATION , 1983 , KT’s World of Advanced Manufacturing Technologies , 2nd edition ( Milwaukee , USA Kearney and Trecker Corporation ).
   Google Scholar
• LENZ , J. E. , 1985 , MAST A simulation tool as advanced as the FMS it studies . Proceedings of the 1st International Conference on Simulation in Manufacturing , pp. 325 – 329 .
   Google Scholar
• MCARTHUR , D. J. , KLAHR , P. , and NARAIN , S. , 1986 , ROSS An object-oriented language for constructing simulation . Expert Systems , edited by P. Klahr and D. Waterman ( Reading Addison-Wesley ), pp. 70 – 94 .
   Google Scholar
• META SOFTWARE , 1990 , Design/IDEF User's Manual ( Meta Software ).
   Google Scholar
• NEWMAN , S. T. , 1990 , An Integrated Approach to the Design and Evaluation of Flexible Machining Cells . Ph.D. Thesis , Loughborough University of Technology .
   Google Scholar
• PHELPS , R. I. , 1986 , Artificial intelligence—An overview of similarities with O. R . Journal of the Operational Research Society , 37 ( 1 ), 13 – 20 .
   Web of Science ®Google Scholar
• RAJAGOPALAN , R. , 1985 , Qualitative modelling and simulation A survey . A.I. Applied to Simulation , edited by E. Kerckhoffs,G. Vannstenkiste and B. Zeigier, Simulation Series , 18 ( 1 ), 9 – 26 .
   Google Scholar
• REDDY , Y. V. , FOX , M. S. , and HUSAIN , N. , 1986 , The knowledge-based simulation system . IEEE Software , 3 , 26 – 37 .
   Google Scholar
• RICH , E. , 1983 , Artificial Intelligence ( New York McGraw-Hill ).
   Google Scholar
• SEIDMANN , A. , and SCHWEITZER , P. J. , 1984 , Part selection policy for a flexible manufacturing cell feeding several production lines . IIE Transactions , 16 ( 4 ), 355 – 362 .
   Web of Science ®Google Scholar
• SHIRES , N. , 1988 , The Distributed Simulation of Highly Automated Batch Manufacturing Systems . Ph.D. Thesis , Loughborough University of Technology .
   Google Scholar
• SILVA , C. M. , and BASTOS , J. M. , 1985 , The use of decision mechanisms in visual simulation for flexible manufacturing systems modelling . AI Applied to Simulation , edited by E. Kerckhoffs et al . Simulation Series , 18 ( 1 ), 165 – 170 .
   Google Scholar
• SMITH , A. W. , HUGHES , D. R. , and HAULL , R. S. , 1986 , The use of AI techniques in dynamic simulation . Proceedings of the 2nd International Conference on Simulation in Manufacturing , pp. 45 – 50 .
   Google Scholar
• SOLBERG , J. J. , 1982 , Mathematical design tools for integrated production systems . Proceedings of the 23rd MTDR Conference , pp. 175 – 187 .
   Google Scholar
• SURI , R. , and DILLE , J. W. , 1985 , A technique for on-line sensitivity analysis of FMSs . Annals of Operations Research , 3 , 381 .
   Google Scholar
• SURI , R. , and WHITNEY , C. , 1984 , Designing a decision support system for FMS . Journal of Manufacturing Systems , 3 ( 1 ), 61 – 69 .
   Web of Science ®Google Scholar
• VAUCHER , J. , 1985 , Views of modelling Comparing the simulation and AI approaches . AI, Graphics and Simulation , edited by G. Birtwistle ( San Diego SCS ), pp. 3 – 7 .
   Google Scholar
• VERE , S. A. , 1983 , Planning in time Windows and durations for activities and goals . IEEE PAMI , 5 , 246 – 266 .
   Google Scholar
• WANG , W. , 1989 , A Knowledge Based Modelling System for the Design and Evaluation of Flexible Manufacturing Facilities . Ph.D. Thesis , Loughborough University of Technology .
   Google Scholar
• WICHMANN , K. E. , 1986 , An intelligent simulation environment for the design and operation of FMS . Proceedings of the 2nd International Conference on Simulation in Manufacturing , pp. 1 – 11 .
   Google Scholar
• XEROX CORPORATION, 1983 , The LOOPS Manual , Xerox PARC , USA .
   Google Scholar
• XEROX CORPORATION, 1985 , Interslip-D Manual , Xerox PARC , USA .
   Google Scholar