Incorporation of tool-life variables in NC path planning

References

• ANAND , S. , RAMAN , S. , and WYSK , R. A. , 1988 , Vision assisted NC milling path generation . Journal of Manufacturing Systems , 7 ( 3 ), 233 – 240 .
   Web of Science ®Google Scholar
• HOSHI , T. , and OKUSHIMA , K. , 1965 , Optimum diameter and position of a fly cutter for milling 0-45C steel, 195 BhN and 0-4C steel, 167BhN at light cuts. Transactions of the ASME, November , 442 – 446 .
   Google Scholar
• KRONENBERG , M. , 1946 , Analysis of initial contact of milling cutters and work in relation to tool-life . Transactions of the ASME, April , 217 – 228 .
   Google Scholar
• LAKKARAJU , R. , 1990 , Optimization of tool path and its impact on tool-life in NC face milling,M.S. Thesis, The University of Oklahoma .
   Google Scholar
• LAKKARAJU , R. , and RAMAN , S. , 1990 , Optimal NC path planning-is it really possible? Computers and Industrial Engineering , 19 ( 1–4 ), 462 – 464 .
   Google Scholar
• LAKKARAJU , R. , RAMAN , S. , and IRANI , S. A. , 1992 , An analytical model for optimization of NC tool cutting path . International Journal of Production Research , 3 (c) ( 1 ), 109 – 127 .
   Web of Science ®Google Scholar
• LEHTIHET , EL-AMINE , and KANE , G. E. , 1986 , Face milling with silicon nitride based cutting toois . Proceedings of North American Manufacturing Research Conference ( Dearborn , MI Society of Manufacturing Engineers ).
   Google Scholar
• LOLADZE , T. N. , 1975 , Nature of brittle failure of cutting tool . Annals of the CIRP , 24 ( 1 ), 13 – 16 .
   Google Scholar
• LUCHT , W. F. , 1946 , Some effects of work positioning when face-milling steel . Transactions of the ASME, February , 151 – 160 .
   Google Scholar
• MARTELLOTTI , M. E. , 1941 , An analysis of the milling process-Parts I and II . Transactions of the ASME , November, 647 – 700 .
   Google Scholar
• OPITZ , H. , and BECKHAUS , H. , 1970 , Influence of initial contact on tool-life when face milling high strength materials. Annals of the CIRP, 18 , 257 – 264 .
   Google Scholar
• PEKELHARING , A. J. , 1978 , The exit failure in interrupted cutting. Annals of the CIRP , 27 ( 1 ), 5 – 10 .
   Google Scholar
• RAMARAJ , T. C. , SANTHANAM , S. , and SHAW , M. C. , 1988 , Tool fracture at end of a cut-Part 1 foot formation. Transactions of the ASME, Journal of Engineering for Industry, 110 , 333 – 338 .
   Google Scholar
• SHAW , M. C. , 1979 , Fracture or metal cutting tools. Annals of CIRP , 28 ( 1 ), 19 – 21 .
   Google Scholar
• WANG , H. P. , CHANG , H. , and WYSK , R. A. , 1988 , An analytical approach to optimize NC tool path planning for face milling flat convex polygonal surfaces . HE Transactions , 20 ( 3 ), 325 – 331 .
   Google Scholar
• WANG , H. P. , CHANG , H. , WVSK , R. A. , and CHANDAWARKAR , A. , 1987 , On the efficiency of NC tool path planning for face milling operations. Transactions of the ASME, Journal of Engineering for Industry, 109 , 370 – 376 .
   Google Scholar