A geometric approach to nonlinear fault detection and isolation in a hybrid three-cell converter

References

• Aguilera, F., De la Barrera, P. M., De Angelo, C. H., & Espinoza Trejo, D. R. (2016). Current-sensor fault diagnosis in induction-motor drives using a geometric approach. Control Engineering Practice, 53, 35–46. doi: 10.1016/j.conengprac.2016.04.014
   Web of Science ®Google Scholar
• Bejarano, F. J., Ghanes, M., & Barbot, J. P. (2010). Observability and observer design for hybrid multicell choppers. International Journal of Control, 83(3), 617–632. doi: 10.1080/00207170903334821
   Web of Science ®Google Scholar
• Benmansour, K., Benalia, A., Djemai, M., & Deleon, J. (2007). Hybrid control of a multicellular converter. Nonlinear Analysis: Hybrid Systems, 1, 16–29.
   Web of Science ®Google Scholar
• Benmiloud, M., Benalia, A., Djemai, M., & Defoort, M. (2018). On the local stabilization of hybrid limit cycles in switched affin systems. in IEEE transactions on automatic control. doi:10.1109/TAC.2018.2841806.
   Google Scholar
• Defoort, M., Djemai, M., Floquet, T., & Perruquetti, W. (2011). Robust finite time observer design for multicellular converter. International Journal of System Science, 42(11), 1859–1868. doi: 10.1080/00207721.2010.543494
   Web of Science ®Google Scholar
• De Persis, C., De Santis, R., & Isidori, A. (2001). Actuator fault detection and isolation for a VTOL aircraft. Proceedings of the American Control Conference.
   Google Scholar
• De Persis, C., & Isidori, A. (2000). On the observability co-distributions of nonlinear systems. System and Control Letters, 40, 297–304. doi: 10.1016/S0167-6911(00)00014-1
   Google Scholar
• De Persis, C., & Isidori, A. (2001). A geometric approach to nonlinear fault detection and isolation. IEEE Transactions on Automatic Control, 46(6), 853–865. doi: 10.1109/9.928586
   Web of Science ®Google Scholar
• Ding, X., Poon, J., Celanovic, I., & Domínguez-García, A. D. (2013). Fault detection and isolation filters for three-phase AC-DC power electronics systems. IEEE Transactions on Circuits and Systems I, 60(4), 1038–1051. doi: 10.1109/TCSI.2012.2221222
   Google Scholar
• Espinoza Trejo, D. R., & Campos Delgado, D. U. (2009). Detection and isolation of actuator faults for a class of non linear systems with application to electric drives. IET Control Theory and Application, 3(10), 1317–1329. doi: 10.1049/iet-cta.2008.0377
   Web of Science ®Google Scholar
• Gazzam, N., & Benalia, A. (2016). Observability analysis and observer design of multicellular converters. 8th International conference on modelling, identification and control ICMIC, 763–767.
   Google Scholar
• Join, C., Ponsart, J. C., Sauter, D., & Theilliol, D. (2005). Nonlinear filter design for fault diagnosis: Application to three-tank system. Control Theory Application, 152(1), 55–64. doi: 10.1049/ip-cta:20041124
   Google Scholar
• Khelouat, S., Benalia, A., Boukhetala, D., & Laleg Kirati, T. M. (2012). A geometric approach for fault detection and isolation of stator short circuit failure in a single asynchronous machine. American Control Conference, 5138–5145.
   Google Scholar
• Khelouat, S., Benalia, A., Laleg Kirati, T. M., & Boukhetala, D. (2018). Sliding mode observer design based linear matrix inequality approach for a three-cell converter. 6th International Conference on Control Engineering and Information Technologies, 573–578.
   Google Scholar
• Khelouat, S., Laleg Kirati, T. M., Benalia, A., Djemai, M., & Boukhetala, D. (2013). On sliding mode observer for a hybrid three-cell converter. 3rd International Conference on Systems and Control, 613–618.
   Google Scholar
• Koutroulis, E., Chatzakisa, J., Kalaitzakisa, K., Maniasb, S., & Voulgaris, N. C. (2003). A system for inverter protection and real-time monitoring. Microelectronics Journal, 34(9), 823–832. doi: 10.1016/S0026-2692(03)00134-4
   Web of Science ®Google Scholar
• Levin, K. T., Hope, E. M., & Domínguez-García, A. D. (2010). Observer-based fault diagnosis of power electronics systems. IEEE Energy Conversion Congress and Exposition.
   Google Scholar
• Lootsma, T. F. (2001). Observer based fault detection and isolation for nonlinear systems. Phd thesis, Aalborg University.
   Google Scholar
• Louajri, H., & Sayed-Mouchaweh, M. (2014). Decentralized approach for fault diagnosis of three cell converters. Annual Conference of the Prognostics and Health Management Society, 5, 265–277.
   Google Scholar
• Mashreghi, A., & Namvar, M. (2018). Geometric-based fault diagnosis in a grid-connected inverter. IEEE Conference on Decision and Control (CDC), doi:10.1109/CDC.2018.8619631.
   Google Scholar
• Massoumnia, M. A. (1986). A geometric approach to the synthesis of failure detection filters. IEEE Transactions on Automatic Control, 31(9), 839–846. doi: 10.1109/TAC.1986.1104419
   Web of Science ®Google Scholar
• Meynard, T. A., Foch, H., Thomas, P., Courault, J., Jakob, R., & Nahrstaedt, M. (2002). Multicell converter: Basic concepts and industry application. IEEE Transactions on Industrial Electronics, 49(5), 955–964. doi: 10.1109/TIE.2002.803174
   Web of Science ®Google Scholar
• Meziane, H., Labarre, C., Lefteriu, S., Defoort, M., & Djemai, M. (2015). Fault detection and isolation for a multi-cellular converter based on sliding mode observer. 9th IFAC symposium on fault detection, supervision and safety for technical processes SAFEPROCESS.
   Google Scholar
• Patino, D., Riedinger, P., & Lung, C. (2008). Predictive control approach for multicellular converters. 34th Annual conference of IEEE on industrial electronics IECON, 3309–3314.
   Google Scholar
• Peng, T., Tao, H., Yang, C., Chen, Z., Yang, C., Gui, W., & Karimi, H. R. (2018). A uniform modelling method based on open circuit faults analysis for npc-three-level converter. IEEE Transactions on Circuit and Systems II. doi:10.1109/TCSII.2018.2856862
   Google Scholar
• Ren, H., Zong, G., & Karimi, H. R. (2019). Asynchronous finite-time filtering of networked switched systems and its application: An event-driven method. IEEE Transactions on Circuit and Systems, 66(1), 391–402. doi: 10.1109/TCSI.2018.2857771
   Google Scholar
• Richardeau, F., Baudesson, P., & Meynard, T. A. (2002). Faillures-tolerance and remedial strategies of a PWM multicell inverter. IEEE Transactions on Power Electronics, 17(6), 125–247. doi: 10.1109/TPEL.2002.805588
   Web of Science ®Google Scholar
• Tachon, O., Fadel, M., & Meynard, T. (1997). Control of series multicell converters by linear state feedback decoupling. EPF Grenoble, 1588–1593.
   Google Scholar
• Tanwani, A., Dominguez-Garcia, A. D., & Liberzon, D. (2011). An inversion-based approach to fault detection and isolation in switching electrical networks. IEEE Transactions on Control Systems Technology, 19(05), 1059–1074. doi: 10.1109/TCST.2010.2067214
   Google Scholar
• Tanwani, A., & Liberzon, D. (2010). Invertibility of switched nonlinear systems. Automatica, 46, 1962–1973. doi: 10.1016/j.automatica.2010.08.002
   Web of Science ®Google Scholar
• Uzunova, M., Ould-Bouamama, B., & Djemai, M. (2012). Hybrid bond graph diagnostic and localisation-signal signature study of three-cell converter. in Mediterranean Conference on Control and Automation (MED).
   Google Scholar
• Van Gorp, J., Defoort, M., & Djemai, M. (2011). Binary signals design to control a power converter. 50th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC), 6794–6799.
   Google Scholar