References
- Goldschmidt, A.; Streitbeger, H. J. BASF Handbook on Basics of Coating Technology; Vincentz: Berlin, 2003.
- Ebnesajjad, S.; Landrock, A. H. Chapter 1 - Introduction and Adhesion Theories. In Adhesives Technology Handbook, Third ed.; Ebnesajjad, S., Landrock, A. H., Eds.; William Andrew Publishing: Boston, 2015; pp 1–18.
- Budhe, S.; Banea, M. D.; de Barros, S.; Da Silva, L. F. M. An Updated Review of Adhesively Bonded Joints in Composite Materials. Int. J. Adhes. Adhesives. 2017, 72, 30–42. DOI: 10.1016/j.ijadhadh.2016.10.010.
- Goland, M.;. The Stresses in Cemented Joints. J. Appl. Mech. Trans. ASME. 1944, 66, A-17-A-27.
- Da Silva, L. F. M.; Das Neves, P. J. C.; Adams, R. D.; Spelt, J. K. Analytical Models of Adhesively Bonded joints—Part I: Literature Survey. Int. J. Adhes. Adhesives. 2009, 29(3), 319–330. DOI: 10.1016/j.ijadhadh.2008.06.005.
- Da Silva, L. F. M.; Das Neves, P. J. C.; Adams, R. D.; Spelt, J. K. Analytical Models of Adhesively Bonded joints—Part II: Comparative Study. Int. J. Adhes. Adhesives. 2009, 29(3), 331–341. DOI: 10.1016/j.ijadhadh.2008.06.007.
- Tomblin, J.; Harter, P.; Seneviratne, W.; Yang, C. Characterization of Bondline Thickness Effects in Adhesive Joints. J. Composites. Technol. Res. 2002, 24(2), 332–344. DOI: 10.1520/CTR10562J.
- Ojalvo, I. U.; Eidinoff, H. L. Bond Thickness Effects upon Stresses in Single-Lap Adhesive Joints. Aiaa J. 1978, 16(3), 204–211. DOI: 10.2514/3.60878.
- Hart-Smith, L.;. Adhesive Bonding of Composite Structures- Progress to Date and Some Remaining Challenges. J. Composites, Technol. Res. 2002, 24(3), 133–151. DOI: 10.1520/CTR10566J.
- Da Silva, L. F. M.; Rodrigues, T. N. S. S.; Figueiredo, M. A. V.; de Moura, M. F. S. F.; Chousal, J. A. G. Effect of Adhesive Type and Thickness on the Lap Shear Strength. J Adhes. 2006, 82(11), 1091–1115. DOI: 10.1080/00218460600948511.
- Baldan, A.;. Adhesively-Bonded Joints and Repairs in Metallic Alloys, Polymers and Composite Materials: Adhesives, Adhesion Theories and Surface Pretreatment. J. Mater. Sci. 2004, 39(1), 1–49. DOI: 10.1023/B:JMSC.0000007726.58758.e4.
- Tzetzis, D.;. The Role of Surface Morphology on the Strength and Failure Mode of Polymer Fibre Reinforced Single Lap Joints. J. Mater. Sci. 2008, 43(12), 4271–4281. DOI: 10.1007/s10853-008-2621-2.
- Tang, J. H.; Sridhar, I.; Srikanth, N. Static and Fatigue Failure Analysis of Adhesively Bonded Thick Composite Single Lap Joints. Compos. Sci. Technol. 2013, 86, 18–25. DOI: 10.1016/j.compscitech.2013.06.018.
- Banea, M.; Silva, L. F. M.; Campilho, R. An Overview of the Technologies for Adhesive Debonding on Command. Annals of the University ‘Dunarea De Jos’ of Galati: Fascicle XII, Welding Equipment & Technology. 2013, 24, p 11–14.
- Hutchinson, A.; Liu, Y.; Lu, Y. Overview of Disbonding Technologies for Adhesive Bonded Joints. J Adhes. 2017, 93(10), 737–755. DOI: 10.1080/00218464.2016.1237876.
- Lu, Y.; Broughton, J.; Winfield, P. A Review of Innovations in Disbonding Techniques for Repair and Recycling of Automotive Vehicles. Int. J. Adhes. Adhesives. 2014, 50, 119–127. DOI: 10.1016/j.ijadhadh.2014.01.021.
- Ilgin, M.; Gupta, S. Remanufacturing Modeling and Analysis; CRC Press: Boca Raton, 2012.
- Hexcel, HexPly® M56 180ºC (350ºF) Out-Of-Autoclave Curing Matrix; Product Data Sheet; 2017.
- Scotch-Weld EPX Adhesive DP490. Product Data Sheet; 1996.
- 3M™ Surface Pre-Treatment AC-130-2. Application Guide, https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Surface-Pre-Treatment-AC-130-2/?N=5002385+3292667587&rt=rud. (accessed Mar, 2018).
- 3M Scotch-weld Structural Adhesive Primer EW-5005.Technical Data Sheet; 2018.
- Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding. 2014.
- Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal). 2010.