Vacuum-UV of polyetheretherketone (PEEK) as a surface pre-treatment for structural adhesive bonding

References

• Kallage, I. Bewertung des Belastungs und Verformungsverhaltens ausgewählter PEEK-Compounds für zahnärtzliche Behandlungen. PhD Thesis, Medizinische Fakultät Charité, Berlin, 2015.
   Google Scholar
• Da Silva, L. F. M.; Öchsner, A.; Adams, R. D. Handbook of Adhesion Technology; Springer Science & Business Media: Berlin Heidelberg New York, 2011. ISBN 978-3-642-01168-9.
   Google Scholar
• Adams, R. D.; Comyn, J.; Wake, W. C. Structural Adhesive Joints in Engineering; Springer Netherlands: Berlin, 1997. ISBN 978-0-412-70920-3.
   Google Scholar
• Habenicht, G.;. Kleben: Grundlagen, Technologien, Anwendungen; Springer-Verlag Berlin Heidelberg: Heidelberg, 1997. ISBN 978-3-540-85264-3.
   Google Scholar
• Kinloch, A. J.; Taig, C. M., The Adhesive Bonding of Thermoplastic Composites. J. Adhes. 1987, 21, 291–302. DOI: 10.1080/00218468708074976.
   Web of Science ®Google Scholar
• Hamdan, S.; Evans, J. R. G., The Surface Treatment and Adhesive Bonding of Polyetheretherketone. Part I. Adhesive Joint Strength. J. Adhes. Sci. Technol. 1987, 4, 281–289. DOI: 10.1163/156856187X00292.
   Google Scholar
• Davies, P.; Courty, C.; Xanthopoulos, N.; Mathieu, H. J. Surface Treatment for Adhesive Bonding of Carbon Fibre-Poly(Ether Ether Ketone) Composites. J. Mater. Sci. Lett. 1991, 10, 335–338. DOI: 10.1007/BF00719701.
   Google Scholar
• Ourahmoune, R.; Salvia, M.; Mathia, T. G.; Berethel, B. Effect of Sandblasting Substrate Treatment on Single Lap Shear Strength of Adhesively Bonded PEEK and Its Composites. Presented at the 18th International Conference on Composite Materials, Korea, 2011.
   Google Scholar
• Kraus, E.; Baudrit, B.; Heidemeyer, P.; Bastian, M.; Stoyanov, O.; Starostina, I., Surface Treatment with Ultraviolet Laser for Adhesive Bonding of Polymeric Materials. J. Adhes. 2017, 93, 204–215. DOI: 10.1080/00218464.2015.1062982.
   Web of Science ®Google Scholar
• Comyn, J.; Mascia, L.; Xiao, G., Plasma-Treatment of Polyetheretherketone (PEEK) for Adhesive Bonding. Int. J. Adhes. Adhes. 1996, 16, 97–104. DOI: 10.1016/0143-7496(96)89798-3.
   Web of Science ®Google Scholar
• Kruse, A.; Krüger, G.; Baalmann, A.; Hennemann, O. D., Surface Pretreatment of Plastics for Adhesive Bonding. J. Adhes. Sci. Technol. 1995, 12, 1611–1621. DOI: 10.1163/156856195X00248.
   Web of Science ®Google Scholar
• Pawson, D. J.; Ameen, A. P.; Short, R. D., An Investigation of the Surface Chemistry of Poly(Ether Etherketone). I. The Effect of Oxygen Plasma Treatment on Surface Structure. Surf. Interface Anal. 1992, 18, 13–22. DOI: 10.1002/sia.740180104.
   Web of Science ®Google Scholar
• Inagaki, N.; Tasaka, S.; Horiuchi, T.; Suyama, R., Surface Modification of Poly(Aryl Ether Ether Ketone) Film by Remote Oxygen Plasma. J. Appl. Polym. Sci. 1998, 68, 271–279. DOI: 10.1002/(SICI)1097-4628(19980411)68:2<271::AID-APP9>3.0.CO;2-N.
   Web of Science ®Google Scholar
• Occhiello, E.; Morra, M.; Guerrini, G. L.; Garbassi, F., Adhesion Properties of Plasma-Treated carbon/PEEK Composites. Composites. 1992, 23, 193–200. DOI: 10.1016/0010-4361(92)90440-6.
   Web of Science ®Google Scholar
• Iqbal, H. M. S.; Bhowmik, S.; Bhatnagar, N.; Mondal, S.; Ahmed, S., High Performance Adhesive Bonding of High Temperature Resistant Polymer. J. Adhes. Sci. Technol. 2012, 26, 955–967. DOI: 10.1163/156856111X593658.
   Web of Science ®Google Scholar
• Iqbal, H. M. S.; Bhowmik, S.; Benedictus, R., Surface Modification of High Performance Polymers by Atmospheric Pressure Plasma and Failure Mechanism of Adhesive Bonded Joints. Int. J. Adhes. Adhes. 2010, 30, 418–424. DOI: 10.1016/j.ijadhadh.2010.02.007.
   Web of Science ®Google Scholar
• Schäfer, J. Oberflächenvorbehandlung von kohlefaserverstärktem Polyamid 6 für das strukturelle Kleben im modernen Automobilbau. PhD Thesis, Universität der Bundeswehr München, München, 2015.
   Google Scholar
• Friedrich, J.;. The Plasma Chemistry of Polymer Surfaces; Wiley-VCH: Weinheim, 2012. ISBN 1-28-066321-9.
   Google Scholar
• Rudakowski, S.; XERADEX VUV. Presented at 13th Workshop ak-adp, Osram, 2012.
   Google Scholar
• Shinohara, H.; Kasahara, T.; Shoji, S.; Mizuno, J., Studies on Low-Temperature Direct Bonding of VUV/O3-, VUV- and O2 Plasma-Pre-Treated Poly-Methylmethacrylate. J. Micromech. Microeng. 2011, 21, 085028. DOI: 10.1088/0960-1317/21/8/085028.
   Web of Science ®Google Scholar
• Shi, H.; Sinke, J.; Benedictus, R., Surface Modification of PEEK by UV Irradiation for Direct Co-Curing with Carbon Fibre Reinforced Epoxy Prepregs. Int. J. Adhes. Adhes. 2017, 73, 51–57. DOI: 10.1016/j.ijadhadh.2016.07.017.
   Web of Science ®Google Scholar
• Mathieson, I.; Bradley, R. H., Effects of Ultra Violet/Ozone Oxidation on the Surface Chemistry of Polymer Films. Key Eng. Mater. 1995, 99-100, 185–192. DOI: 10.4028/www.scientific.net/KEM.99-100.185.
   Google Scholar
• Walzak, M. J.; Flynn, S.; Foerch, R.; Hill, J. M.; Karbashewski, E.; Lin, A.; Strobel, M., UV and Ozone Treatment of Polypropylene and Poly(Ethylene Terephthalate). J. Sci. Technol. 1995, 9, 1229–1248. DOI: 10.1163/156856195X01012.
   Google Scholar
• Peeling, J.; Jazzar, M. S.; Clark, D. T., An ESCA Study of the Surface Ozonation of Polystyrene Film. J. Polym. Sci. Polym. Chem. 1982, 20, 1797–1805. DOI: 10.1002/pol.1982.170200713.
   Web of Science ®Google Scholar
• Peeling, J.; Clark, D. T., Surface Ozonation and Photooxidation of Polyethylene Film. J. Sci. Polym. Chem. 1983, 21, 2047–2055. DOI: 10.1002/pol.1983.170210715.
   Web of Science ®Google Scholar
• Peeling, J.; Courval, G.; Jazzar, M. S., ESCA and Contact‐Angle Studies of the Surface Modification of Poly(Ethylene Terephthalate) Film: Photooxidation and Aging. J. Polym. Sci. Polym. Chem. 1984, 22, 419–428. DOI: 10.1002/pol.1984.170220213.
   Web of Science ®Google Scholar
• Rabek, J. F.; Lucki, J.; Ranby, B.; Watanabe, Y.; Qu, B. J., Oxidative Reactions Caused by Ozone and Atomic Oxygen on Polymer Surfaces. ACS Symp. Ser. 1988, 364, 187–200. DOI: 10.1021/bk-1988-0364.ch014.
   Google Scholar
• Hozumi, A.; Masuda, T.; Hayashi, K.; Sugimura, H.; Takai, O.; Kameyama, T., Spatially Defined Surface Modification of Poly(Methylmethacrylate) Using 172nm Vaccum Ultraviolet Light. Langmuir. 2002, 18, 9022–9027. DOI: 10.1021/la020478b.
   Web of Science ®Google Scholar
• Klonica, M.; Kuczmaszewski, J.; Kwiatkowski, M.; Ozonek, J., Polyamide 6 Surface Layer following Ozone Treatment. Int. J. Adhes. Adhes. 2016, 64, 179–187. DOI: 10.1016/j.ijadhadh.2015.10.017.
   Web of Science ®Google Scholar
• Teare, D. O. H.; Ton-That, C.; Bradley, R. H. Surface Characterization and Ageing of Ultraviolet - Ozone-Treated Polymers Using Atomic Force Microscopy and X-Ray Photoelectron Spectroscopy. Surf. Interface Anal. 2000, 29, 276–283. DOI: 10.1002/(SICI)1096-9918(200004)29:4<276::AID-SIA740>3.0.CO;2-P.
   Web of Science ®Google Scholar
• Kuang, P.; Constant, K. Increased Wettability and Surface Free Energy of Polyurethane by Ultraviolet Ozone Treatment. In Wetting and Wettability; Aliofkhazraeim, M., Ed.; IntechOpen, 2015. DOI: 10.5772/60798.
   Google Scholar
• Shinohara, H.; Mizuno, J.; Shoji, S., Studies on Low-Temperature Direct Bonding of VUV. VUV/O3 and O2 Plasma Pretreated Cyclo-Olefin Polymer. Sens. Actuators. 2011, 165, 124–131. DOI: 10.1016/j.sna.2010.04.006.
   Web of Science ®Google Scholar
• Yousaf, A.; Farrukh, A.; Oluz, Z.; Tuncel, E.; Duran, H.; Dogan, S. Y.; Tekinay, T.; Rehman, H.; Yameen, B., UV-light Assisted Single Step Route to Functional PEEK Surfaces. React. Funct. Polym. 2014, 83, 70–75. DOI: 10.1016/j.reactfunctpolym.2014.07.011.
   Web of Science ®Google Scholar
• Hill, J. M.; Karbasheweski, E.; Lin, A.; Strobel, M.; Walzak, M. J. Effects of Aging and Washing on UV and Ozone-Treated Poly(Ethylene Terephthalate) and Polyproprylene. J. Adhes. Sci. Technol. 1995, 9. DOI: 10.1163/156856195X00211.
   Web of Science ®Google Scholar
• Li, X.; Toro, M.; Lu, F.; On, J.; Bailey, A.; Debies, T.; Mehan, M.; Gupta, S. K.; Takacs, G. A., Vacuum UV Photo-Oxidation of Polystyrene. J. Adhes. Sci. Technol. 2016, 30, 2212–2223. DOI: 10.1080/01694243.2016.1178026.
   Web of Science ®Google Scholar
• Khot, A.; Lu, F.; Debies, T.; Takacs, G. A., Surface Activation of Perfluorosulfonic Acid Membrane Used in Fuel Cells with Vacuum UV Photo-Oxidation. J. Adhes. Sci. Technol. 2012, 27, 309–323. DOI: 10.1080/01694243.2012.705525.
   Web of Science ®Google Scholar
• Banea, M. D.; Da Silva, L. F. M., Adhesively Bonded Joints in Composite Materials: An Overview. J. Mater. 2009, 223, 1–18. DOI: 10.1243/14644207JMDA219.
   Web of Science ®Google Scholar
• Rietz, U.; Lerche, D.; Hielscher, S.; Beck, U. Centrifugal Adhesion Testing Technology (CATT) - a Valuable Tool for Strength Determination. J. Adhes Soc. Jpn. 2015, 80, 293–297. STRENGTH. DOI: 10.11618/adhesion.51.293.
   Google Scholar
• De Freese, J. End Milling of CFRP for the Preparation of Adhesive Bonded Joints. Presented at the 4th International Conference on Structural Adhesive Bonding, Porto, 2017.
   Google Scholar
• Owens, D. K.; Wendt, R. C., Estimation of the Surface Free Energy of Polymers. J. Appl. Polym. Sci. 1969, 13, 1741–1747. DOI: 10.1002/app.1969.070130815.
   Web of Science ®Google Scholar
• Briggs, D.;. Surface Analysis of Polymers by XPS and Static SIMS; Cambridge University Press: New York, NY, 1998. ISBN-13: 978-0521352222.
   Google Scholar
• Evans, J. R. G.; Bulpett, R.; Ghezel, M., The Surface Treatment and Adhesive Bonding of Polyetheretherketone. Part II. Surface Characterization. J. Adhes. Sci. Technol. 1987, 1, 291–302. DOI: 10.1163/156856187X00300.
   Google Scholar
• LITE GmbH. Datasheet. LITE GmbH, 2018. http://www.lipp-terler.com (accessed Oct 23, 2018).
   Google Scholar
• Müller, H. Oberflächenbehandlung für strukturelle Klebungen im Flugzeugbau durch Atmosphärendruck-Plasma an duromeren Faserverbundwerkstoffen. Master Thesis, Hochschule für angewandte Wissenschaften, München, 2015.
   Google Scholar
• Holtmannspötter, J.; Schneider, B.; Wetzel, M.; Feucht, F.; Zimmer, F.; Hofmann, T.; Thäsler, T.; de Freese, J.; Arikan, E.; Gudladt, H.-J. Herausforderungen beim strukturellen Kleben von Faserverbundkunststoffen in der Luftfahrt. Presented at the Seminar für Mechanik, München 2017.
   Google Scholar
• Hexel Corporation. HexFlow RTM6 Product Datasheet. http://www.hexel.com (accessed Oct 23, 2018).
   Google Scholar
• Holtmannspötter, J.; Czarnecki, J. V.; Wetzel, M.; Dolderer, D.; Eisenschink, C., The Use of Peel Ply as a Method to Create Reproduceable but Contaminated Surfaces for Structural Adhesive Bonding of Carbon Fiber Reinforced Plastics. J. Adhes. 2013, 89, 96–110. DOI: 10.1080/00218464.2012.731828.
   Web of Science ®Google Scholar
• Budhe, S.; Banea, M. D.; de Barros, S.; Da Silva, L. F. M., An Updated Review of Adhesively Bonded Joints in Composite Materials. Int. J. Adhes. Adhes. 2017, 72, 30–43. DOI: 10.1016/j.ijadhadh.2016.10.010.
   Web of Science ®Google Scholar
• Klein, B.;. Leichtbau-Konstruktion: Berechnungsgrundlagen und Gestaltung; Springer Verlag: Wiesbaden, 2013. ISBN 978-3-658-02272-3.
   Google Scholar
• Matting, A.; Ulmer, K. Grenzflächenreaktion und Spannungsverteilung in Metallklebverbindungen. Kautschuk und Gummi. 1963, 16, 213–224.
   Google Scholar
• Da Silva, L. F. M.; Adams, R. D., Techniques to Reduce the Peel Stresses in Adhesive Joints with Composites. Int. J. Adhes. Adhes. 2007, 27, 227–235. DOI: 10.1016/j.ijadhadh.2006.04.001.
   Web of Science ®Google Scholar
• Strobel, M.; Lyons, C. S.; Strobel, J. M.; Kapaun, R. S., Analysis of Air-Corona-Treated Polypropylene and Poly(Etheylene Terephthalate) Films by Contact-Angle Measurents and X-Ray Photoelectron Spectroscopy. J. Sci. Technol. 1992, 6, 429–443. DOI: 10.1163/156856192X00764.
   Google Scholar
• Strobel, M.; Jones, V.; Lyons, C. S.; Ulsh, M.; Kushner, M. J.; Dorai, R.; Branch, M., A Comparison of Corona-Treated and Flame-Treated Polypropylene Films. Plasmas Polym. 2003, 8, 61–95. DOI: 10.1023/A:1022817909276.
   Google Scholar
• Vos, N. Untersuchung der Eignung der Vakuum-UV-Strahlung zur Vorbehandlung für das strukturelle Kleben von Faserverbundwerkstoffen. Master Thesis, Universität der Bundeswehr München, München, 2014.
   Google Scholar
• Brewis, D. M.;, Adhesion to Polymers: How Important are Weak Boundary Layers? Int. J. Adhes. Adhes. 1993, 13, 251–256. DOI: 10.1016/0143-7496(93)90028-8.
   Web of Science ®Google Scholar