References
- Allen, H. G.;. Analysis and Design of Structural Sandwich Panels; Pergamon press: Oxford, 1969.
- Davies, J. M.;. Lightweight Sandwich Construction; Blackwell Science ltd.: London, 2001.
- Hudson, C. W.; Carruthers, J. J.; Robinson, A. M. Multiple Objective Optimisation of Composite Sandwich Structures for Rail Vehicle Floor Panels. Compos. Struct. 2010, 92, 2077–2082. DOI: 10.1016/j.compstruct.2009.10.018.
- Aly, M. F.; Hamza, K. T.; Farag, M. M. A Materials Selection Procedure for Sandwiched Beams via Parametric Optimization with Applications in Automotive Industry. Mater. Des. 2014, 56, 219–226. DOI: 10.1016/j.matdes.2013.10.075.
- Carlsson, L. A.; Kardomateas, G. A. Structural and Failure Mechanics of Sandwich Composites; Springer Science+Business Media B.V.: New York, 2011.
- Belingardi, G.; Goglio, L.; Tarditi, A. Investigating the Effect of Spew and Chamfer Size on the Stresses in Metal/plastics Adhesive Joints. Int. J. Adhes. Adhes. 2002, 22, 273–282. DOI: 10.1016/S0143-7496(02)00004-0.
- Kilic, B.; Madenci, E.; Ambur, D. R. Influence of Adhesive Spew in Bonded Single-lap Joints. Eng. Fract. Mech. 2006, 73, 1472–1490. DOI: 10.1016/j.engfracmech.2005.12.015.
- Rispler, A. R.; Tong, L.; Steven, G. P.; Wisnom, M. R. Shape Optimisation of Adhesive Fillets. Int. J. Adhes. Adhes. 2000, 20, 221–231. DOI: 10.1016/S0143-7496(99)00047-0.
- Zielecki, W.; Kubit, A.; Kluz, R.; Trzepieciński, T. Investigating the Influence of the Chamfer and Fillet on the High-cyclic Fatigue Strength of Adhesive Joints of Steel Parts. J. Adhes. Sci. Technol. 2017, 31, 627–644. DOI: 10.1080/01694243.2016.1229521.
- Rion, J.; Leterrier, Y.; Månson, J. E. Prediction of the Adhesive Fillet Size for Skin to Honeycomb Core Bonding in Ultra-light Sandwich Structures. Compos. Part A. 2008, 39, 1547–1555. DOI:10.1016/j.compositesa.2008.05.022
- Keshavanarayana, S. R.; Shahverdi, H.; Kothare, A.; Yang, C.; Bingenheimerb, J. The Effect of Node Bond Adhesive Fillet on Uniaxial In-plane Responses of Hexagonal Honeycomb Core. Compos. Struct. 2017, 175, 111–122. DOI: 10.1016/j.compstruct.2017.05.010.
- Peppiatt, N. A.; Adams, R. D. Stress Analysis of Adhesive-bonded Lap Joints. J Strain Anal, 1974, 9, 185–196. DOI:10.1243/03093247V093185
- Crocombe, A. D.; Adams, R. D. Influence of the Spew Fillet and Other Parameters on the Stress Distribution in the Single Lap Joint Influence of the Spew Fillet and Other Parameters on the Stress Distribution in the Single Lap Joint. J. Adhes. 1981, 13, 141–155. DOI: 10.1080/00218468108073182.
- Lang, T. P.; Mallick, P. K. Effect of Spew Geometry on Stresses in Single Lap Adhesive Joints. Int. J. Adhes. Adhes. 1998, 18, 167–177. DOI: 10.1016/S0143-7496(97)00056-0.
- Doru, M. O.; Özel, A.; Akpinar, S.; Aydin, M. D. Effect of the Spew Fillet on Adhesively Bonded Single-lap Joint Subjected to Tensile Loading: Experimental and 3-D Non-linear Stress Analysis. J. Adhes. 2014, 90, 195–209. DOI: 10.1080/00218464.2013.777900.
- Giv, A. N.; Ayatollahi, M. R.; Ghaffari, S. H.; da Silva L. F. M. Effect of Reinforcements at Different Scales on Mechanical Properties of Epoxy Adhesives and Adhesive Joints : a Review. J. Adhes. 2018, 94, 1058–1097. DOI: 10.1080/00218464.2018.1452736.
- Sadek, S. H.; Areias, B.; Parente, M. P. L.; Belinha, J.; Santos, A. D.; Natal Jorge, R. M. Aluminum Foam Sandwich with Adhesive Bonding : Computational Modeling. J. Adhes. 2017, 93, 1025–1047. DOI: 10.1080/00218464.2016.1200975.
- Leal, A. J. S.; Campilho, R. D. S. G. Numerical Evaluation of the ENF and 4ENF Tests for the Shear Toughness Estimation of Adhesive Joints. Compos. Struct. 2018, 202, 333–343. DOI: 10.1016/j.compstruct.2018.01.107.
- Campilho, R. D. S. G.; Banea, M. D.; Chaves, F. J. P.; Silva, L. F. M. D. eXtended Finite Element Method for Fracture Characterization of Adhesive Joints in Pure Mode I. Comput. Mater. Sci. 2011, 50, 1543–1549. DOI: 10.1016/j.commatsci.2010.12.012.
- Davies, G. A. O.; Guiamatsia, I. The Problem of the Cohesive Zone in Numerically Simulating Delamination/debonding Failure Modes. Appl. Compos. Mater. 2012, 19, 831–838. DOI: 10.1007/s10443-012-9257-8.
- Campilho, R. D. S. G.; Banea, M. D.; Pinto, A. M. G.; Da Silva, L. F. M.; de Jesus, A. M. P. Strength Prediction of Single- and Double-lap Joints by Standard and Extended Finite Element Modelling. Int. J. Adhes. Adhes. 2011, 31, 363–372. DOI: 10.1016/j.ijadhadh.2010.09.008.
- Campilho, R. D. S. G.; de Moura, M. F. S. F.; Pinto, A. M. G.; Morais, J. J. L.; Domingues, J. J. M. S. Modelling the Tensile Fracture Behaviour of CFRP Scarf Repairs. Compos. Part B Eng. 2009, 40, 149–157. DOI: 10.1016/j.compositesb.2008.10.008.
- Zeng, H.; Yan, R.; Xu, L. Failure Prediction of Composite Sandwich L-joint under Bending. Compos. Struct. 2018, 197, 54–62. DOI: 10.1016/j.compstruct.2018.05.022.
- Knox, E. M.; Cowling, M. J.; Winkle, I. E. Adhesively Bonded Steel Corrugated Core Sandwich Construction for Marine Applications. Mar. Struct. 1998, 11, 185–204. DOI: 10.1016/S0951-8339(98)40651-8.
- Balzani, C.; Wagner, W. An Interface Element for the Simulation of Delamination in Unidirectional Fiber-reinforced Composite Laminates. Eng. Fract. Mech. 2008, 75, 2597–2615. DOI: 10.1016/j.engfracmech.2007.03.013.
- Yu, Y.; Ying, L.; Hou, W.-B.; Hu, P.; Jia, -X.-X.; Akhmet, G. Failure Analysis of Adhesively Bonded Steel Corrugated Sandwich Structures under Three-point Bending. Compos. Struct. 2018, 184, 256–268. DOI: 10.1016/j.compstruct.2017.10.011.
- Schwalbe, K. H.; Scheider, I.; Cornec, A. Guidelines for Applying Cohesive Models to the Damage Behaviour of Engineering Materials and Structures; Springer: Heidelberg, New York, Dordrecht, London, 2003.