References
- Silva, L. F. M. D. Design Rules and Methods to Improve Joint Strength, In da Silva L.F.M., Öchsner A., Adams R.D. (Eds.), Handbook of Adhesion Technology, Springer Berlin Heidelberg, Berlin, Heidelberg, 2011, pp. 689-723.
- Dawood, M.; Rizkalla, S. Environmental Durability of a CFRP System for Strengthening Steel Structures. Constr. Build. Mater. 2010, 24, 1682–1689. DOI: 10.1016/j.conbuildmat.2010.02.023.
- Nguyen, T. C.; Bai, Y.; Al-Mahaidi, R.; Zhao, X. L. Time-dependent Behaviour of steel/CFRP Double Strap Joints Subjected to Combined Thermal and Mechanical Loading. Compos. Struct. 2012, 94, 1826–1833. DOI: 10.1016/j.compstruct.2012.01.007.
- Nguyen, T. C.; Bai, Y.; Zhao, X. L.; Al-Mahaidi, R. Curing Effects on steel/CFRP Double Strap Joints under Combined Mechanical Load, Temperature and Humidity. Constr. Build. Mater. 2013, 40, 899–907. DOI: 10.1016/j.conbuildmat.2012.11.035.
- Agarwal, A.; Foster, S. J.; Hamed, E. Wet Thermo-mechanical Behavior of steel–CFRP Joints – An Experimental Study. Compos. B Eng. 2015, 83, 284–296. DOI: 10.1016/j.compositesb.2015.08.025.
- Agarwal, A.; Foster, S. J.; Hamed, E. Testing of New Adhesive and CFRP Laminate for steel-CFRP Joints under Sustained Loading and Temperature Cycles. Compos. B Eng. 2016, 99, 235–247. DOI: 10.1016/j.compositesb.2016.06.039.
- Bai, Y.; Nguyen, T. C.; Zhao, X. L.; Al-Mahaidi, R. Environment-Assisted Degradation of the Bond between Steel and Carbon-Fiber-Reinforced Polymer. J. Mater. Civ. Eng.. 2014, 26, 04014054. DOI:10.1061/(ASCE)MT.1943-5533.0000951.
- Yao, M. X.; Zhu, D. J.; Yao, Y. M.; Zhang, H. A.; Mobasher, B. Experimental Study on Basalt FRP/steel Single-lap Joints under Different Loading Rates and Temperatures. Compos. Struct. 2016, 145, 68–79. DOI: 10.1016/j.compstruct.2016.02.061.
- Li, J.; Yan, Y.; Zhang, T.; Liang, Z. Experimental Study of Adhesively Bonded CFRP Joints Subjected to Tensile Loads. Int. J. Adhes. Adhes. 2015, 57, 95–104. DOI: 10.1016/j.ijadhadh.2014.11.001.
- Machado, J. J. M.; Nunes, P. D. P.; Marques, E. A. S.; Da Silva, L. F. M. Adhesive Joints Using Aluminium and CFRP Substrates Tested at Low and High Temperatures under Quasi-static and Impact Conditions for the Automotive Industry. Compos. B Eng. 2019, 158, 102–116. DOI: 10.1016/j.compositesb.2018.09.067.
- Galvez, P.; Quesada, A.; Martinez, M. A.; Abenojar, J.; Boada, M. J. L.; Diaz, V. Study of the Behaviour of Adhesive Joints of Steel with CFRP for Its Application in Bus Structures. Compos. B Eng. 2017, 129, 41–46. DOI: 10.1016/j.compositesb.2017.07.018.
- Galvez, P.; Abenojar, J.; Martinez, M. A. Durability of steel-CFRP Structural Adhesive Joints with Polyurethane Adhesives. Compos. B Eng. 2019, 165, 1–9. DOI: 10.1016/j.compositesb.2018.11.097.
- Banea, M. D.; Da Silva, L. F. M.; Carbas, R. J. C.; de Barros, S. Debonding on Command of Multi-material Adhesive Joints. J. Adhes. 2016, 93, 756–770. DOI: 10.1080/00218464.2016.1199963.
- Han, X.; Crocombe, A. D.; Anwar, S. N. R.; Hu, P. The Strength Prediction of Adhesive Single Lap Joints Exposed to Long Term Loading in a Hostile Environment. Int. J. Adhes. Adhes. 2014, 55, 1–11. DOI: 10.1016/j.ijadhadh.2014.06.013.
- Han, X.; Crocombe, A. D.; Anwar, S. N. R.; Hu, P.; Li, W. D. The Effect of a Hot–Wet Environment on Adhesively Bonded Joints under a Sustained Load. J. Adhes. 2014, 90, 420–436. DOI: 10.1080/00218464.2013.853176.
- Li, W. D.; Tang, L. P.; Han, X.; Gao, E. P. The Effect of Constant Loading on the Mechanical Behavior of Bulk Adhesive. J. Adhes. 2017, 93, 993–1007. DOI: 10.1080/00218464.2016.1196590.
- ASTM-International. ASTM D5868-01(2014) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding, ASTM International, West Conshohocken, PA, 2014, www.astm.org.DOI: 10.1520/D5868-01R14
- Sun, Z.; Huang, W.; Jiang, Y. Evolution of Residual-inplane Stress during Adhesive Curing and Recuring in Chip-on-board Packages. J. Electron. Mater. 2002, 31, 887–894. DOI: 10.1007/s11664-002-0200-x.
- Zhang, K.; Yang, Z.; Yuan, L. A Method for Predicting the Curing Residual Stress for CFRP/Al Adhesive Single-lap Joints. Int. J. Adhes. Adhes. 2013, 46, 7–13. DOI: 10.1016/j.ijadhadh.2013.05.010.