A new geometry for improving the strength of single lap joints using adherend notching technique

References

• da Silva, L. F. M.; Carbas, R. J. C.; Critchlow, G. W.; Figueiredo, M. A. V.; Brown, K. Effect of Material, Geometry, Surface Treatment and Environment on the Shear Strength of Single Lap Joints. Int. J. Adhes. Adhes. 2009, 29, 621–632. DOI: 10.1016/j.ijadhadh.2009.02.012.
   Web of Science ®Google Scholar
• da Silva, L. F. M.; Critchlow, G. W.; Figueiredo, M. A. V. Parametric Study of Adhesively Bonded Single Lap Joints by the Taguchi Method. J. Adhes. Sci. Technol. 2008, 22, 1477–1494. DOI: 10.1163/156856108X309585.
   Web of Science ®Google Scholar
• Nemati Giv, A.; Ayatollahi, M. R.; Ghaffari, S. H.; da Silva, L. F. M. Effect of Reinforcements at Different Scales on Mechanical Properties of Epoxy Adhesives and Adhesive Joints: A Review. J. Adhes. 2018, 94, 1082–1121. DOI: 10.1080/00218464.2018.1452736.
   Web of Science ®Google Scholar
• Ayatollahi, M. R.; Nemati Giv, A.; Razavi, S. M. J.; Khoramishad, H. Mechanical Properties of Adhesively Single Lap-bonded Joints Reinforced with Multi-‌‌‌walled Carbon Nanotubes and Silica Nanoparticles. J. Adhes. 2017, 93, 896–913. DOI: 10.1080/00218464.2016.1187069.
   Web of Science ®Google Scholar
• Razavi, S. M. J.; Ayatollahi, M. R.; Nemati Giv, A.; Khoramishad, H. Single Lap Joints Bonded with Structural Adhesives Reinforced with a Mixture of Silica Nanoparticles and Multi Walled Carbon Nanotubes. Int. J. Adhes. Adhes. 2018, 80, 76–86. DOI: 10.1016/j.ijadhadh.2017.10.007.
   Web of Science ®Google Scholar
• Nemati Giv, A.; Ayatollahi, M. R.; Razavi, S. M. J.; Khoramishad, H. The Effect of Orientations of Metal Macrofiber Reinforcements on Mechanical Properties of Adhesively Bonded Single Lap Joints. J. Adhes. 2018, 94, 541–561. DOI: 10.1080/00218464.2017.1305270.
   Web of Science ®Google Scholar
• Ayatollahi, M. R.; Giv, A. N.; Mohamad, S.; Razavi, J. The Effect of Macro Fiber Reinforcements on Mechanical Behavior of Single Lap Adhesively Bonded Joints in Two Different Orientations. Modares Mech. Eng. 2015, 16, 121–128.
   Google Scholar
• Khoramishad, H.; Razavi, S. M. J. Metallic Fiber-reinforced Adhesively Bonded Joints. Int. J. Adhes. Adhes. 2014, 55, 114–122. DOI: 10.1016/j.ijadhadh.2014.08.005.
   Web of Science ®Google Scholar
• Khalili, S. M. R.; Shokuhfar, A.; Hoseini, S. D.; Bidkhori, M.; Khalili, S.; Mittal, R. K. Experimental Study of the Influence of Adhesive Reinforcement in Lap Joints for Composite Structures Subjected to Mechanical Loads. Int. J. Adhes. Adhes. 2008, 28, 436–444. DOI: 10.1016/j.ijadhadh.2008.04.009.
   Web of Science ®Google Scholar
• Gaul, H.; Weber, G. Technology of Weld-Adhesive Joints. In Hybrid Adhesive Joints, 6, 2011, 37–77. DOI:10.1007/8611_2010_47.
   Google Scholar
• Marannano, G.; Zuccarello, B. Static Strength and Fatigue Life of Optimized Hybrid Single Lap aluminum–CFRP Structural Joints. J. Adhes. 2018, 94, 501–528. DOI: 10.1080/00218464.2017.1291349.
   Web of Science ®Google Scholar
• Samaei, M.; Zehsaz, M.; Chakherlou, T. N. Experimental and Numerical Study of Fatigue Crack Growth of Aluminum Alloy 2024-T3 Single Lap Simple Bolted and Hybrid (Adhesive/bolted) Joints. Eng. Fail. Anal. 2016, 59, 253–268. DOI: 10.1016/j.engfailanal.2015.10.013.
   Web of Science ®Google Scholar
• Zeng, Q.; Sun, C. A New Bonded Composite Wavy Lap Joint. In 41st Structures, Structural Dynamics, and Materials Conference and Exhibit, vol 1. American Institute of Aeronautics and Astronautics: Reston, Virigina, 2000. DOI: 10.2514/6.2000-1484.
   Google Scholar
• Ávila, A. F.; De O Bueno, P. Stress Analysis on a Wavy-lap Bonded Joint for Composites. Int. J. Adhes. Adhes. 2004, 24, 407–414. DOI: 10.1016/j.ijadhadh.2003.12.001.
   Web of Science ®Google Scholar
• Ashrafi, M.; Ajdari, A.; Rahbar, N.; Papadopoulos, J.; Nayeb-Hashemi, H.; Vaziri, A. Adhesively Bonded Single Lap Joints with Non-flat Interfaces. Int. J. Adhes. Adhes. 2012, 32, 46–52. DOI: 10.1016/j.ijadhadh.2011.09.004.
   Web of Science ®Google Scholar
• Razavi, S. M. J.; Berto, F.; Peron, M.; Torgersen, J. Parametric Study of Adhesive Joints with Non-flat Sinusoid Interfaces. Theor. Appl. Fract. Mech. 2018, 93, 44–55. DOI: 10.1016/j.tafmec.2017.06.019.
   Web of Science ®Google Scholar
• Sancaktar, E.; Nirantar, P. Increasing Strength of Single Lap Joints of Metal Adherends by Taper Minimization. J. Adhes. Sci. Technol. 2003, 17, 655–675. DOI: 10.1163/156856103321340796.
   Web of Science ®Google Scholar
• Amaro, A. M.; Neto, M. A.; Loureiro, A.; Reis, P. N. B. Taper’s Angle Influence on the Structural Integrity of Single-lap Bonded Joints. Theor. Appl. Fract. Mech. 2018, 96, 231–246. DOI: 10.1016/j.tafmec.2018.05.006.
   Web of Science ®Google Scholar
• Adams, R. D.; Atkins, R. W.; Harris, J. A.; Kinloch, A. J. Stress Analysis and Failure Properties of Carbon-Fibre-Reinforced-Plastic/Steel Double-Lap Joints. J. Adhes. 1986, 20, 29–53. DOI: 10.1080/00218468608073238.
   Web of Science ®Google Scholar
• Sancaktar, E.; Simmons, S. R. Optimization of Adhesively-bonded Single Lap Joints by Adherend Notching. J. Adhes. Sci. Technol. 2000, 14, 1363–1404. DOI: 10.1163/156856100742258.
   Web of Science ®Google Scholar
• Yan, Z.-M.; You, M.; Yi, X.-S.; Zheng, X.-L.; Li, Z. A Numerical Study of Parallel Slot in Adherend on the Stress Distribution in Adhesively Bonded Aluminum Single Lap Joint. Int. J. Adhes. Adhes. 2007, 27, 687–695. DOI: 10.1016/j.ijadhadh.2007.02.003.
   Web of Science ®Google Scholar
• Pinto, A. M. G.; Ribeiro, N. F. Q. R.; Campilho, R. D. S. G.; Mendes, I. R. Effect of Adherend Recessing on the Tensile Strength of Single Lap Joints. J. Adhes. 2014, 90, 649–666. DOI: 10.1080/00218464.2013.766132.
   Web of Science ®Google Scholar
• Beigrezaee, M. J.; Ayatollahi, M. R.; Bahrami, B.; da Silva, L. F. M. Failure Load Analysis in Single Lap Joints - Effect of Adherend Notching. Eng. Fail. Anal. 2019, 104, 75–83. DOI: 10.1016/j.engfailanal.2019.05.020.
   Web of Science ®Google Scholar
• Bahrami, B.; Ayatollahi, M. R.; Beigrezaee, M. J.; da Silva, L. F. M. Strength Improvement in Single Lap Adhesive Joints by Notching the Adherends. Int. J. Adhes. Adhes. 2019, 95, 102401. DOI: 10.1016/j.ijadhadh.2019.102401.
   Web of Science ®Google Scholar
• Rastegar, S.; Ayatollahi, M.; Akhavan-Safar, A.; da Silva, L. Prediction of the Critical Stress Intensity Factor of Single-lap Adhesive Joints Using a Coupled Ratio Method and an Analytical Model. Proc. Inst. Mech. Eng. Part L. 2019, 233, 1393–1403. DOI: 10.1177/1464420718755630.
   Web of Science ®Google Scholar
• Khoramishad, H.; Akhavan-Safar, A.; Ayatollahi, M.; da Silva, L. Predicting Static Strength in Adhesively Bonded Single Lap Joints Using a Critical Distance Based Method: Substrate Thickness and Overlap Length Effects. Proc. Inst. Mech. Eng. Part L. 2017, 231, 237–246. DOI: 10.1177/1464420716666427.
   Web of Science ®Google Scholar
• Akhavan-Safar, A.; Ayatollahi, M. R.; da Silva, L. F. M. Strength Prediction of Adhesively Bonded Single Lap Joints with Different Bondline Thicknesses: A Critical Longitudinal Strain Approach. Int. J. Solids Struct. 2017, 109, 189–198. DOI: 10.1016/j.ijsolstr.2017.01.022.
   Web of Science ®Google Scholar
• Abdi, H.; Papadopoulos, J.; Nayeb-Hashemi, H.; Vaziri, A. Enhanced Elastic-foundation Analysis of Balanced Single Lap Adhesive Joints. Int. J. Adhes. Adhes. 2017, 72, 80–91. DOI: 10.1016/j.ijadhadh.2016.10.006.
   Web of Science ®Google Scholar
• Ayatollahi, M. R.; Akhavan-Safar, A. Failure Load Prediction of Single Lap Adhesive Joints Based on a New Linear Elastic Criterion. Theor. Appl. Fract. Mech. 2015, 80, 210–217. DOI: 10.1016/j.tafmec.2015.07.013.
   Web of Science ®Google Scholar
• Sarrado, C.; Leone, F. A.; Turon, A. Finite-thickness Cohesive Elements for Modeling Thick Adhesives. Eng. Fract. Mech. 2016, 168, 105–113. DOI: 10.1016/j.engfracmech.2016.03.020.
   Web of Science ®Google Scholar
• UHU plus endfest 300 technical data sheet. https://media2.supermagnete.de/docs/uhu_plus_endfest_300_eng.pdf.
   Google Scholar