References
- Machalická, K.; Vokáč, M.; Kostelecká, M.; Eliášová, M. Structural Behavior of Double-lap Shear Adhesive Joints with Metal Substrates under Humid Conditions. Int. J. Mech. Mater. Des. 2018, DOI: https://doi.org/10.1007/s10999-018-9404-y.
- Paiva, R. M. M.; António, C. A. C.; da Silva, L. F. M. Multiobjective Optimization of Mechanical Properties Based on the Composition of Adhesives. Int. J. Mech. Mater. Des. 2017, 13, 1–24. DOI: https://doi.org/10.1007/s10999-015-9313-2.
- Adams, R.;. Structural Adhesive Joints in Engineering; Springer Netherlands, London, UK, 1984.
- Gonçalves, V. M.; Martins, P. A. F. Joining Stainless Steel Parts by Means of Weld Bonding. Int. J. Mech. Mater. Des. 2006, 3, 91–101. DOI: https://doi.org/10.1007/s10999-006-9015-x.
- da Silva, L. F. M.; Öchsner, A.; Adams, R. Handbook of Adhesion Technology; 2018. Springer Nature, Cham, Switzerland.
- Abdel Wahab, M.;. Fatigue in Adhesively Bonded Joints: A Review. ISRN Mater. Sci. 2012, 2012, DOI:https://doi.org/10.5402/2012/746308
- Olajide, S. O.; Arhatari, B. D. Recent Progress on Damage Mechanisms in Polymeric Adhesively Bonded High-performance Composite Joints under Fatigue. Int. J. Fatigue. 2017, 95, 45–63. DOI: https://doi.org/10.1016/j.ijfatigue.2016.10.009.
- Shenoy, V.; Ashcroft, I. A.; Critchlow, G. W.; Crocombe, A. D.; Abdel Wahab, M. M. An Investigation into the Crack Initiation and Propagation Behaviour of Bonded Single-lap Joints Using Backface Strain. Int. J. Adhes. Adhes. 2009, 29, 361–371. DOI: https://doi.org/10.1016/J.IJADHADH.2008.07.008.
- Zamani, P.; Jaamialahmadi, A.; da Silva, L. F. M.; Farhangdoost, K. An Investigation on Fatigue Life Evaluation and Crack Initiation of Al-GFRP Bonded Lap Joints under Four-point Bending. Compos. Struct. 2019, 229, 111433. DOI: https://doi.org/10.1016/j.compstruct.2019.111433.
- Zhang, Z.; Shang, J. K., Jr.; Lawrence, F. V. A Backface Strain Technique for Detecting Fatigue Crack Initiation in Adhesive Joints. J. Adhes. 1995, 49, 23–36. DOI: https://doi.org/10.1080/00218469508009975.
- Moradi, A.; Carrère, N.; Leguillon, D.; Martin, E.; Cognard, J.-Y. Strength Prediction of Bonded Assemblies Using a Coupled Criterion under Elastic Assumptions: Effect of Material and Geometrical Parameters. Int. J. Adhes. Adhes. 2013, 47, 73–82. DOI: https://doi.org/10.1016/j.ijadhadh.2013.09.044.
- Monteiro, J.; Akhavan-Safar, A.; Carbas, R.; Marques, E.; Goyal, R.; El-zein, M.; da Silva, L. F. M. Mode II Modeling of Adhesive Materials Degraded by Fatigue Loading Using Cohesive Zone Elements. Theor. Appl. Fract. Mech. 2019, 103, 102253. DOI: https://doi.org/10.1016/j.tafmec.2019.102253.
- Monteiro, J.; Akhavan-Safar, A.; Carbas, R.; Marques, E.; Goyal, R.; El-zein, M.; da Silva, L. F. M. Influence of Mode Mixity and Loading Conditions on the Fatigue Crack Growth Behaviour of an Epoxy Adhesive. Fatigue Fract. Eng. Mater. Struct. 2020, 43, 308–316. DOI: https://doi.org/10.1111/ffe.13125.
- Rocha, A.; Akhavan-Safar, A.; Carbas, R.; Marques, E.; Goyal, R.; El-Zein, M.; Silva, L. F. M. Fatigue Crack Growth Analysis of Different Adhesive Systems: Effects of Mode Mixity and Load Level. Fatigue Fract. Eng. Mater. Struct. 2019, DOI: https://doi.org/10.1111/ffe.13145.
- Rocha, A. V. M.; Akhavan-Safar, A.; Carbas, R.; Marques, E. A. S.; Goyal, R.; El-zein, M.; da Silva, L. F. M. Numerical Analysis of Mixed-mode Fatigue Crack Growth of Adhesive Joints Using CZM. Theor. Appl. Fract. Mech. 2020a, 106, 102493. DOI: https://doi.org/10.1016/j.tafmec.2020.102493.
- Rocha, A. V. M.; Akhavan-Safar, A.; Carbas, R.; Marques, E. A. S.; Goyal, R.; El-Zein, M.; da Silva, L. F. M. Paris Law Relations for an Epoxy-based Adhesive. Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 2020b, 234, 291–299. DOI: https://doi.org/10.1177/1464420719886469.
- Thäsler, T.; Holtmannspötter, J.; Gudladt, H.-J. Monitoring the Fatigue Crack Growth Behavior of Composite Joints Using in Situ 2D-digital Image Correlation. J. Adhes. 2019, 95, 595–613. DOI: https://doi.org/10.1080/00218464.2018.1562923.
- Costa, M.; Viana, G.; Créac’hcadec, R.; da Silva, L. F. M.; Campilho, R. D. S. G. A Cohesive Zone Element for Mode I Modelling of Adhesives Degraded by Humidity and Fatigue. Int. J. Fatigue. 2018, 112, 173–182. DOI: https://doi.org/10.1016/j.ijfatigue.2018.03.014.
- Akhavan-Safar, A.; da Silva, L. F. M.; Ayatollahi, M. R. An Investigation on the Strength of Single Lap Adhesive Joints with a Wide Range of Materials and Dimensions Using a Critical Distance Approach. Int. J. Adhes. Adhes. 2017, 78, 248–255. DOI: https://doi.org/10.1016/j.ijadhadh.2017.08.009.
- Imanaka, M.; Iwata, T. Fatigue Failure Criterion of Adhesively-Bonded Joints under Combined Stress Conditions. J. Adhes. 1996, 59, 111–126. DOI: https://doi.org/10.1080/00218469608011081.
- Imanaka, M.; Iwata, T. Estimation of Fatigue Strength for Adhesively-Bonded Lap Joints Based on Fatigue Failure Criterion under Multiaxial Stress Conditions. J. Adhes. 1998, 65, 7–24. DOI: https://doi.org/10.1080/00218469808012236.
- Jen, Y.-M.;. Fatigue Life Evaluation of Adhesively Bonded Scarf Joints. Int. J. Fatigue. 2012, 36, 30–39. DOI: https://doi.org/10.1016/j.ijfatigue.2011.08.018.
- Shahani, A. R.; Pourhosseini, S. M. The Effect of Adherent Thickness on Fatigue Life of Adhesively Bonded Joints. Fatigue Fract. Eng. Mater. Struct. 2019, 42, 561–571. DOI: https://doi.org/10.1111/ffe.12931.
- Beber, V. C.; Schneider, B.; Brede, M. Efficient Critical Distance Approach to Predict the Fatigue Lifetime of Structural Adhesive Joints. Eng. Fract. Mech. 2019, 214, 365–377. DOI: https://doi.org/10.1016/j.engfracmech.2019.03.022.
- Spaggiari, A.; Castagnetti, D.; Dragoni, E. A Design Oriented Multiaxial Stress-based Criterion for the Strength Assessment of Adhesive Layers. Compos. Part B Eng. 2019, 157, 66–75. DOI: https://doi.org/10.1016/j.compositesb.2018.08.085.
- Wang, C. H.; Rose, L. R. F. Determination of Triaxial Stresses in Bonded Joints. Int. J. Adhes. Adhes. 1997, 17, 17–25. DOI: https://doi.org/10.1016/S0143-7496(96)00028-0.
- García, J. A.; Chiminelli, A.; García, B.; Lizaranzu, M.; Jiménez, M. A. Characterization and Material Model Definition of Toughened Adhesives for Finite Element Analysis. Int. J. Adhes. Adhes. 2011, 31, 182–192. DOI: https://doi.org/10.1016/j.ijadhadh.2010.12.006.
- Ward, I. M.;. Review: The Yield Behaviour of Polymers. J. Mater. Sci. 1971, 6, 1397–1417. DOI: https://doi.org/10.1007/BF00549685.
- Abdel Wahab, M.; Hilmy, I.; Ashcroft, I.; Crocombe, A. Damage Parameters of Adhesive Joints with General Triaxiality Part I: Finite Element Analysis. J. Adhes. Sci. Technol. 2011, 25, 903–923. DOI: https://doi.org/10.1163/016942410X534939.
- Akhavan-Safar, A.; Ayatollahi, M. R.; Moazzami, M.; da Silva, L. F. M. The Role of T-stress and Stress Triaxiality Combined with the Geometry on Tensile Fracture Energy of Brittle Adhesives. Int. J. Adhes. Adhes. 2018, 87, 12–21. DOI: https://doi.org/10.1016/j.ijadhadh.2018.09.008.
- Kohout, J.; Veˇchet, S. A New Function for Fatigue Curves Characterization and Its Multiple Merits. Int. J. Fatigue. 2001, 23, 175–183. DOI: https://doi.org/10.1016/S0142-1123(00)00082-7.
- Beber, V. C.; Fernandes, P. H. E.; Schneider, B.; Brede, M.; Mayer, B. Fatigue Lifetime Prediction of Adhesively Bonded Joints: An Investigation of the Influence of Material Model and Multiaxiality. Int. J. Adhes. Adhes. 2017, 78, 240–247. DOI: https://doi.org/10.1016/j.ijadhadh.2017.08.007.
- Castagnetti, D.; Dragoni, E. Standard Finite Element Techniques for Efficient Stress Analysis of Adhesive Joints. Int. J. Adhes. Adhes. 2009, 29, 125–135. DOI: https://doi.org/10.1016/j.ijadhadh.2008.01.005.
- Castagnetti, D.; Spaggiari, A.; Dragoni, E. Assessment of the Cohesive Contact Method for the Analysis of Thin-walled Bonded Structures. Int. J. Adhes. Adhes. 2012, 37, 112–120. DOI: https://doi.org/10.1016/j.ijadhadh.2012.01.012.