References
- Maggiore, S.; Pedemonte, M.; Bazurro, A.; Stagnaro, P.; Utzeri, R.; Luciano, G. Characterization of the Effect of an Epoxy Adhesive in Hybrid FSW-bonding Aluminium-steel Joints for Naval Application. Int. J. Adhes. Adhes. 2020, 103, 102702. DOI: https://doi.org/10.1016/j.ijadhadh.2020.102702.
- Lertora, E.; Mandolfino, C.; Pizzorni, M.; Gambaro, C. Influence of Adhesive in FSW: Investigation on Fatigue Behavior of Welded, Weld-bonded, and Adhesive-bonded Joints in Aluminum AA 6082 T6. Materials. 2019, 12(8), 1242. DOI: https://doi.org/10.3390/ma12081242.
- Blatnicky, M.; Saga, M.; Dizo, J.; Bruna, M. Application of Light Metal Alloy EN AW 6063 to Vehicle Frame Construction with an Innovated Steering Mechanism. Materials. 2020, 13(4), 817. DOI: https://doi.org/10.3390/ma13040817.
- De Castro, C. C.; Plaine, A. H.; De Alcantara, N. G.; Dos Santos, J. F. Taguchi Approach for the Optimization of Refill Friction Stir Spot Welding Parameters for AA2198-T8 Aluminum Alloy. Int. J. Adv. Manuf. Technol. 2018, 99(5–8), 1927–1936. DOI: https://doi.org/10.1007/s00170-018-2609-2.
- Hu, S.; Haselhuhn, A. S.; Ma, Y.; Li, Y.; Carlson, B. E.; Lin, Z. Influencing Mechanism of Inherent Aluminum Oxide Film on Coach Peel Performance of Baked Al-Steel RSW. Mater. Des. 2021, 197, 109250. DOI: https://doi.org/10.1016/j.matdes.2020.109250.
- Lu, Y.; Sage, D. D.; Fink, C.; Zhang, W.; Dissimilar Metal Joining of Aluminium to Zinc-coated Steel by Ultrasonic Plus Resistance Spot Welding–microstructure and Mechanical Properties. Sci. Technol. Weld. Joi. 2020, 253, 218–227. DOI:https://doi.org/10.1080/13621718.2019.1667051.
- Shen, Z.; Ding, Y.; Gerlich, A. P. Advances in Friction Stir Spot Welding. Crit. Rev. Solid State Mater. Sci. 2020, 45(6), 457–534. DOI: https://doi.org/10.1080/10408436.2019.1671799.
- Kang, M.; Yoon, J.; Kim, C. Hook Formation and Joint Strength in Friction Stir Spot Welding of Al Alloy and Al-Si-coated Hot-press Forming Steel. Int. J. Adv. Manuf. Technol. 2020, 106(5–6), 1671–1681. DOI: https://doi.org/10.1007/s00170-019-04716-9.
- Na, J.; Fan, Y.; Tan, W.; Guo, S.; Mu, W. Mechanical Behavior of Polyurethane Adhesive Bonded Joints as a Function of Temperature and Humidity. J. Adhes. Sci. Technol. 2018, 32(5), 457–472. DOI: https://doi.org/10.1080/01694243.2017.1363141.
- Feng, M.; Li, Y.; Zhao, C.; Luo, Z. Mechanical Properties and Interface Morphology of Mg/Al Ultrasonic Spot Weld Bonding Welds. Sci. Technol. Weld. Joining. 2016, 21(8), 688–699. doi: https://doi.org/10.1080/13621718.2016.1144262.
- Ren, D.; Liu, L.; Li, Y. Investigation on Overlap Joining of AZ61 Magnesium Alloy: Laser Welding, Adhesive Bonding, and Laser Weld Bonding. Int. J. Adv. Manuf. Technol. 2012, 61(1–4), 195–204. doi: https://doi.org/10.1007/s00170-011-3683-x.
- Pouranvari, M.; Safikhani, E. Mechanical Properties of Martensitic Stainless Steel Weld/adhesive Hybrid Bonds. Sci. Technol. Weld. Joining. 2018, 23(3), 227–233. doi: https://doi.org/10.1080/13621718.2017.1363453.
- Wang, H.; Liu, L.; Liu, F. The Characterization Investigation of Laser-arc-adhesive Hybrid Welding of Mg to Al Joint Using Ni Interlayer. Mater. Des. 2013, 50, 463–466. DOI: https://doi.org/10.1016/j.matdes.2013.02.085.
- Feng, M.; Chen, Y.; Fu, D.; Qu, C.; Luo, Z.; Fatigue Behaviour and Life Estimation of Mg/Al Ultrasonic Spot Weld Bonding Welds. Sci. Technol. Weld. Joi. 2018, 236, 487–500. DOI:https://doi.org/10.1080/13621718.2017.1417782.
- Braga, D. F.; Maciel, R.; Bergmann, L.; Da Silva, L. F.; Infante, V.; Dos Santos, J. F.; Moreira, P. M.; Fatigue Performance of Hybrid Overlap Friction Stir Welding and Adhesive Bonding of an Al‐Mg‐Cu Alloy. Fatigue Fract. Eng. Mater. Struct. 2019, 426, 1262–1270. DOI:https://doi.org/10.1111/ffe.12933.
- Amaro, A. M.; Reis, P. N. B.; Loureiro, A. Effect of Friction-stir Weld Parameters on Hybrid Bonded Joints. J. Adhes. 2020, 1–17. DOI: https://doi.org/10.1080/00218464.2020.1736572.
- Zhao, H.; Zhang, G.; Zhang, Q.; Zhang, C.; Li, Y. Joining Mechanism and Mechanical Properties of Metallic Bump Assisted Weld-bonded (Mbawb) Joints of AA6061-T6 and Bare DP590. J. Manuf. Processes. 2020, 50, 204–215. DOI: https://doi.org/10.1016/j.jmapro.2019.12.018.
- Peng, D.; Liu, Q.; Li, G.; Cui, J. Investigation on Hybrid Joining of Aluminum Alloy Sheets: Magnetic Pulse Weld Bonding. Int. J. Adv. Manuf. Technol. 2019, 104(9–12), 4255–4264. DOI: https://doi.org/10.1007/s00170-019-04215-x.
- Kumar, A.; Sharma, G.; Dwivedi, D. K. TIG Spot Weld Bonding of 409 L Ferritic Stainless Steel. Int. J. Adhes. Adhes. 2018, 84, 350–359. DOI: https://doi.org/10.1016/j.ijadhadh.2018.04.012.
- Xiao, Z.; Zeng, K.; He, X.; Zhang, L. Fatigue Strength and Failure Analysis of Weld-bonded Joint of Stainless Steel. J. Adhes. 2019, 95(3), 187–203. DOI: https://doi.org/10.1080/00218464.2017.1414605.
- Yu, G.; Chen, X.; Zhang, B.; Pan, K.; Yang, L. Tensile-Shear Mechanical Behaviors of Friction Stir Spot Weld and Adhesive Hybrid Joint: Experimental and Numerical Study. Metals. 2020, 10(8), 1028. DOI: https://doi.org/10.3390/met10081028.
- Hatzky, M.; Frank, A.; Boehm, S. Friction Stir Spot Welding with Additional Bonding of Thick Sheet Aluminum Joints. metals. 2019, 9(7), 732. DOI: https://doi.org/10.3390/met9070732.
- Zhang, B.; Chen, X.; Pan, K.; Wang, J. Multi-objective Optimization of Friction Stir Spot-welded Parameters on Aluminum Alloy Sheets Based on Automotive Joint Loads. Metsls. 2019, 9, 520. DOI: https://doi.org/10.3390/met9050520.
- Campilho, R. D. S. G.; Banea, M. D.; Neto, J. A. B. P.; da Silva, L. F. M. Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer. Int. J. Adhes. Adhes. 2013, 44, 48-56.
- Rodrigues, R. O.; Pinho, D.; Bento, D.; Lima, R.; Ribeiro, J. Wall Expansion Assessment of an Intracranial Aneurysm Model by a 3D Digital Image Correlation System. Measurement. 2016, 88, 262–270. DOI: https://doi.org/10.1016/j.measurement.2016.03.045.
- Johnson, G. R.; Cook, W. H. Fracture Characteristics of Three metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures. Eng. Fract. Mech. 1985, 21(1), 31–48. DOI: https://doi.org/10.1016/0013-7944(85)90052-9.
- Fanelli, P.; Vivio, F.; Vullo, V. Experimental and Numerical Characterization of Friction Stir Spot Welded Joints. Eng. Fract. Mech. 2012, 81, 17–25. DOI: https://doi.org/10.1016/j.engfracmech.2011.07.009.
- Zhang, B.; Chen, X.; Pan, K.; Li, M.; Wang, J. Thermo-mechanical Simulation Using Microstructure-based Modeling of Friction Stir Spot Welded AA 6061-T6. J. Manuf. Processes. 2019, 37, 71–81. DOI: https://doi.org/10.1016/j.jmapro.2018.11.010.
- Teixeira, J. M. D.; Campilho, R.; Da Silva, F. J. G. Numerical Assessment of the Double-Cantilever Beam and Tapered Double-Cantilever Beam Tests for the G IC Determination of Adhesive Layers. J. Adhes. 2018, 94(11), 951–973. DOI: https://doi.org/10.1080/00218464.2017.1383905.
- Fernandes, R. L.; Campilho, R. D. S. G. Accuracy of Cohesive Laws with Different Shape for the Shear Behaviour Prediction of Bonded Joints. J. Adhes. 2019, 95(4), 325–347. DOI: https://doi.org/10.1080/00218464.2018.1438895.
- Ramalho, L. D. C.; Campilho, R. D. S. G.; Belinha, J.; Da Silva, L. F. M. Static Strength Prediction of Adhesive Joints: A Review. Int. J. Adhes. Adhes. 2020, 96, 102451. DOI: https://doi.org/10.1016/j.ijadhadh.2019.102451.
- Reddy, N. S.; Jinaga, U. K.; Charuku, B. R.; Penumakala, P. K.; Prasad, A. V. S. S. Failure Analysis of AA8011-pultruded GFRP Adhesively Bonded Similar and Dissimilar Joints. Int. J. Adhes. Adhes. 2019, 90, 97–105. DOI: https://doi.org/10.1016/j.ijadhadh.2019.02.004.
- Mu, W. L.; Qin, G. F.; Na, J. X.; Tan, W.; Liu, H. L.; Luan, J. Z. Effect of Alternating Load on the Residual Strength of Environmentally Aged Adhesively Bonded CFRP-aluminum Alloy Joints. Compos. B Eng. 2019, 168, 87–97. DOI: https://doi.org/10.1016/j.compositesb.2018.12.070.
- Oz, O.; Ozer, H. An Experimental Investigation on the Failure Loads of the Mono and Bi-adhesive Joints. J. Adhes. Sci. Technol. 2017, 31(19–20), 2251–2270. DOI: https://doi.org/10.1080/01694243.2016.1264661.
- Da Silva, L. F. M.; Lopes, M. J. C. Q. Joint Strength Optimization by the Mixed-adhesive Technique. Int. J. Adhes. Adhes. 2009, 29(5), 509–514. DOI: https://doi.org/10.1016/j.ijadhadh.2008.09.009.