Advanced search
Publication Cover
The Journal of Adhesion Volume 98, 2022 - Issue 6
Submit an article Journal homepage
1,101
Views
4
CrossRef citations to date
0
Altmetric
Research Article

Mechanoluminescent study for optimization of joint design on cross tension test

Nao Terasakia National Institute of Advanced Industrial Science and Technology (AIST), Sensing System Research Center (SSRC), Saga, Japan;b Adhesion and Interfacial Phenomena Research Laboratory (AIRL), National Institute of Advanced Industrial Science and Technology (AIST)Correspondence[email protected]
View further author information
,
Yuki Fujioa National Institute of Advanced Industrial Science and Technology (AIST), Sensing System Research Center (SSRC), Saga, JapanView further author information
,
Shin Horiuchib Adhesion and Interfacial Phenomena Research Laboratory (AIRL), National Institute of Advanced Industrial Science and Technology (AIST)View further author information
,
Haruhisa Akiyamab Adhesion and Interfacial Phenomena Research Laboratory (AIRL), National Institute of Advanced Industrial Science and Technology (AIST)View further author information
&
Masami Itabashic Taiseiplas Co, LtdView further author information
Pages 637-646 | Received 21 Jul 2021, Accepted 29 Oct 2021, Published online: 01 Dec 2021

References

  • Xu, C.-N.; Watanabe, T.; Akiyama, M.; Zheng, X.-G. Direct View of Stress Distribution in Solid by Mechanoluminescence. Appl. Phys. Lett. 1999, 74, 2414–2417.
  • Xu, C.-N.; Ueno, N.; Terasaki, N.; Yamada, H. Mechanoluminescence and Novel Structural Health Diagnosis; NTS Inc, 2012.
  • Terasaki, N. Innovative First Step toward Mechanoluminescent Ubiquitous Light Source for Trillion Sensors. Sens. Mater. 2016, 28, 827–836.
  • Terasaki, N.; Xu, C.-N. Mechanoluminescence Recording Device Integrated with Photosensitive Material and Europium-doped SrAl2O4. Jpn. J. Appl. Phys. 2009, 49, 04C150-1-04C150-4.
  • Terasaki, N.; Xu, C.-N.; Yasuda, K.; Ichinose, L. Fatigue Crack Detection of Steel Truss Bridge by Using Mechanoluminescent Sensor. Proc 6th Int Conf Bridge Maint Saf Manag, 2012;6:2542–2549.
  • Terasaki, N.; Xu, C.-N. Historical-log Recording System for Crack Opening and Growth Based on Mechanoluminescent Flexible Sensor. IEEE Sens. J. 2013, 13, 3999–4004.
  • Terasaki, N.; Fujio, Y.; Sakata, Y.; Horiuchi, S.; Akiyama, H. Visualization of Crack Propagation for Assisting Double Cantilever Beam Test through Mechanoluminescence. J. Adhes. 2018, 94, 867–879.
  • Terasaki, N.; Fujio, Y.; Horiuchi, S.; Akiyama, H. Mechanoluminescent Studies of Failure Line on Double Cantilever Beam (DCB) and tapered-DCB (TDCB) Test with Similar and Dissimilar Material Joints. J. Adhes. 2018, 94, 867–879. Int J Adh Adh 2019;93:4046. Int J Adh Adh 2019;93:4046
  • Fujio, Y.; Xu, C.-N.; Terasawa, Y.; Sakata, Y.; Yamabe, J.; Ueno, N.; Terasaki, N.; Yoshida, A.; Watanabe, S.; Murakami, Y. Sheet Sensor Using SrAl2O4: Eumechanoluminescent Material for Visualizing Inner Crack of High-pressure Hydrogen Vessel. Int. J. Hydrogen Energy. 2015, 41, 1333–1340.
  • Terasaki, N.; Fujio, Y.; Sakata, Y.; Uehara, M.; Tabaru, T. Direct Visualization of Stress Distribution Related to Adhesive through Mechanoluminescence. ECS Trans. 2017, 75, 9–16.
  • Terasaki, N.; Fujio, Y.; Sakata, Y. Visualization of Strain Distribution and Portent of Destruction in Structural Material through Mechanoluminescence. Proc 29th Int Comm Aeronaut Fatigue Struct Integr (ICAF2017) Symp, 2017;75:1961–1967.
  • ISO 14272:2016 . Resistance welding—Destructive Testing of welds—Specimen Dimensions and Procedure for Cross Tension Testing of Resistance Spot and Embossed Projection Welds, 2016.
  • Chandra, T.; Wanderka, N.; Reimers, W.; Ionescu, M. Investigations on the Mechanical Behavior of Advanced High Strength Steels Resistance Spot Welds in Cross Tension and Tensile Shear. Adv. Mater. Res. 2010, 130, 89–91.
  • ISO 4587:2003(en). Adhesives—Determination of Tensile Lap-shear Strength of Rigid-to-rigid Bonded Assemblies, 2003.
  • ISO 22841:2021. Composites and Reinforcements fibres—Carbon Fibre Reinforced plastics(CFRPs) and Metal assemblies—Determination of the Tensile Lap-shear Strength, 2021.
  • Da Silva, L. F. M.; Öchsner, A.; Adams, R. Handbook of Adhesion Technology, Second ed.; Springer, 2018.
  • Horiuchi, S.; Terasaki, N.; Itabashi, M. Evaluation of the Properties of Plastic-metal Interfaces Directly Bonded via Injection Molding. Manuf. Rev. 2020, 2020(7), 1–9.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.