Energy release rate and crack propagation rate behaviour of moisture-deteriorated epoxy adhesives through the double cantilever beam method

References

• Da Silva, L. F. M.; Sato, C. Design of Adhesive Joints under Humid Condition, Springer: Berlin, 2013; DOI: 10.1007/978-3-642-37614-6.
   Google Scholar
• Goglio, L.; Rezaei, M. Degradation of Epoxy-Steel Single Lap Joints Immersed in Water. J. Adhes. 2015, 91(8), 621–636. DOI: 10.1080/00218464.2014.948614.
   Web of Science ®Google Scholar
• Fernandes, P.; Viana, G.; Carbas, R. J. C.; Costa, M.; da Silva, L. F. M.; Banea, M. D. The Influence of Water on the Fracture Envelope of an Adhesive Joint. Theor. Appl. Fract. 2017, 89, 1–15. DOI:10.1016/j.tafmec.2017.01.001.
   Web of Science ®Google Scholar
• Houjou, K.; Shimamoto, K.; Akiyama, H.; Sato, C. Dependence of Fatigue Limit on Stress Ratio and Influence of Cyclic Stress on Shear Strength for an Adhesive Lap Joint. J. Adhes. 2020, 1–13. Published online. DOI: 10.1080/00218464.2020.1738934.
   Web of Science ®Google Scholar
• Houjou, K.; Shimamoto, K.; Akiyama, H.; Sato, C. Experimental Investigations on the Effect of a Wide Range of Strain Rates on Mechanical Properties of Epoxy Adhesives, and Prediction of Creep and Impact Strengths. J. Adhes. 2020, 1–15. DOI: 10.1080/00218464.2020.1840368.
   Web of Science ®Google Scholar
• Houjou, K.; Shimamoto, K.; Akiyama, H.; Sato, C . Effect of Cyclic Moisture Absorption/Desorption on the Strength of Epoxy Adhesive Joints and Moisture Diffusion Coefficient. J. Adhes. 2021, 1–17. DOI: 10.1080/00218464.2021.1926242.
   Web of Science ®Google Scholar
• Houjou, K.; Shimamoto, K.; Akiyama, H.; Sato, C. Effect of Test Temperature on the Shear and Fatigue Strengths of Epoxy Adhesive Joints. J. Adhes. 2021; Online early access. DOI: 10.1080/00218464.2021.1982707.
   Web of Science ®Google Scholar
• Moazzami, M.; Ayatollahi M. R., Akhavan-Safar A., Teixeira De Freitas S., Poulis J. A., da Silva L. F. Influence of Cyclic Aging on Adhesive Mode Mixity in Dissimilar Composite /Metal Double Cantilever Beam Joints. Proc. Inst. Mech. Eng. Part L. J. Mater. Sci. 2022. DOI: 10.1177/14644207221074696.
   Google Scholar
• Khoramishad, H.; Alizadeh, O. Effects of Silicon Carbide Nanoparticles and multi-walled Carbon Nanotubes on Water Uptake and Resultant Mechanical Properties Degradation of Polymer Nanocomposites Immersed in Hot Water. Polym. Compos. 2018, 39(S2), 883–890. DOI: 10.1002/pc.24303.
   Web of Science ®Google Scholar
• Bayati, H.; Khoramishad, H.; Kordzangeneh, D.; Berto, F. The Effect of Hydrophilic and Hydrophobic Nanofillers on Moisture Uptake and Mechanical Properties Degradation of Nanocomposites under Hot and Wet Conditions. Phys. Mesomech. 2021, 24(3), 335–342. DOI: 10.1134/S1029959921030127.
   Web of Science ®Google Scholar
• Blackman, B.; Kinloch, A. Fracture Tests on Structural Adhesive Joints. In Fracture Mechanics Testing Methods for Polymers Adhesives and Composites, 1st ed.; Moore, D. R., Pavan, A., Williams, J. G., Eds.; Amsterdam: Elsevier, 2001; pp 225–267.
   Google Scholar
• Allen, R. F.; Baldini, N. C.; Donofrio, P. E.; Gutman, E. L.; Keefe, E.; Kramer, J. G.; Leinweber, C. M.; Mayer, V. A. D3433-99. In Annual Book of ASTM Standards; America Society for Testing and Materials: West Conshohocken, Pennsylvania, 2005; pp 228–234.
   Google Scholar
• Paris, P.; Erdogan, F. A Critical Analysis of Crack Propagation Laws. J. Basic Eng. 1963, 85(4), 528–533. DOI:10.1115/1.3656900.
   Google Scholar
• Simon, I.; Banks-Sills, L.; Fourman, V. Mode I Delamination Propagation and R-ratio Effects in Woven Composite DCB Specimens for a multi-directional Layup. Int. J. Fatigue. 2017, 96, 237–251. DOI: 10.1016/j.ijfatigue.2016.12.005.
   Web of Science ®Google Scholar
• Rocha, A. V. M.; Akhavan-Safar, A.; Carbas, R.; Marques, E. A. S.; Goyal, R.; El-Zein, M.; da Silva, L. F. M. Paris Law Relations for an epoxy-based Adhesive. Int. Mech. Eng. 2020, 234, 291–299. DOI: 10.1177/1464420719886469.
   Web of Science ®Google Scholar
• Joseph, R.; Bell, J. P.; McEvily, A. J.; Liang, J. L. Fatigue Crack Growth in Epoxy/Aluminum and Epoxy/Steel Joints. J. Adhes. 1993, 41(1–4), 169–187. DOI: 10.1080/00218469308026561.
   Web of Science ®Google Scholar
• Fernando, M.; Harjoprayitno, W.; Kinloch, A. A Fracture Mechanics Study of the Influence of Moisture on the Fatigue Behaviour of Adhesively Bonded aluminium-alloy Joints. Int. J. Adhes. Adhes. 1996, 16(2), 113–119. DOI: 10.1016/0143-7496(96)89799-5.
   Web of Science ®Google Scholar
• Jethwa, J. K.; Kinloch, A. The Fatigue and Durability Behaviour of Automotive Adhesives. Part I: Fracture Mechanics Tests. J. Adhes. 1997, 61(1–4), 71–95. DOI: 10.1080/00218469708010517.
   Web of Science ®Google Scholar
• Kinloch, A.; Little, MS; Watts, J. F. The Role of the Interphase in the Environmental Failure of Adhesive Joints. J. Acta Mater. 2000, 48(18–19), 4543–4553. DOI:10.1016/S1359-6454(00)00240-8.
   Web of Science ®Google Scholar
• Hadavinia, H.; Kinloch, A.; Little, M.; Taylor, A. The Prediction of Crack Growth in Bonded Joints under cyclic-fatigue Loading I. Experimental Studies. Int. J. Adhes. Adhes. 2003, 23(6), 449–461. DOI:10.1016/S0143-7496(03)00074-5.
   Web of Science ®Google Scholar
• Wylde, J. W.; Spelt, J. K. Measurement of Adhesive Joint Fracture Properties as a Function of Environmental Degradation. Int. J. Adhes. Adhes. 1998, 18, 237–246. DOI: 10.1016/S0143-7496(98)00028-1.
   Web of Science ®Google Scholar
• ISO. ISO 25217: Adhesives - Determination of the Mode 1 Adhesive Fracture Energy of Structural Adhesive Joints Using Double Cantilever Beam and Tapered Double Cantilever Beam Specimens. 2009.
   Google Scholar
• Eric, X. C.; Jean-François, M.; Che, L. M.; Che, M. Transformations of γ-alumina in Aqueous Suspensions: 1. Alumina Chemical Weathering Studied as a Function of pH. J. Colloid Inter. Sci. 2007, 308(2), 429–437. DOI: 10.1016/j.jcis.2006.12.074.
   PubMed Web of Science ®Google Scholar
• Shimamoto, K.; Akiyama, K. Estimating the Mechanical Residual Strength from IR Spectra Using Machine Learning for Degraded Adhesives. J. Adhes. 2021, 1–23. Published online. DOI: 10.1080/00218464.2021.1978293.
   Web of Science ®Google Scholar
• Azar, V.; Hashemi, B.; Mahboobe, H.; Yazdi, R. The Effect of Shot Peening on Fatigue and Corrosion Behavior of 316L Stainless Steel in Ringer’s Solution. Surf. Coat. Technol. 2010, 204(21–22), 3546–3551. DOI: 10.1016/j.surfcoat.2010.04.015.
   Web of Science ®Google Scholar
• Pandey, V.; Singh, J. K.; Chattopadhyay, K.; SanthiSrinivas, N. C.; Singh, V. Influence of Ultrasonic Shot Peening on Corrosion Behavior of 7075 Aluminum Alloy. J. Alloys Compd. 2017, 723, 826–840. DOI: 10.1016/j.jallcom.2017.06.310.
   Web of Science ®Google Scholar
• Xu, X. X.; Crocombe, A. D. C.; Smith, P. A. Fatigue Crack Growth Rates in Adhesive Joints Tested at Different Frequencies. J. Adhes. 1996, 58(3–4), 191–204. DOI: 10.1080/00218469608015200.
   Web of Science ®Google Scholar
• Al-Ghamdi, A. H.; Ashcroft, I. A.; Crocombe, A. D.; Abdel-Wahab, M. M. Crack Growth in Adhesively Bonded Joints Subjected to Variable Frequency Fatigue Loading. J. Adhes. 2003, 79(12), 1161–1182. DOI: 10.1080/714906165.
   Web of Science ®Google Scholar
• Pirondi, A.; Nicoletto, G. Fatigue Crack Growth in Bonded DCB Specimens. Eng. Fract. Mech. 2004, 71(4–6), 859–871. DOI: 10.1016/S0013-7944(03)00046-8.
   Web of Science ®Google Scholar