Pressure measurements on a high-head Francis turbine during load acceptance and rejection

REFERENCES

• Antonsen, O. (2007). Unsteady flow in wicket gate and runner with focus on static and dynamic load runner. PhD Thesis. NTNU, Norway.
   Google Scholar
• ASME PTC-18. (2011). Hydraulic turbines and pump-turbines, performance test codes. ASME, New York.
   Google Scholar
• Bakken, B.H., Bjørkvoll, T. (2002). Hydropower unit start-up costs. Proc. Int. Conf. IEEE transactions of the power engineering society summer meeting, Chicago, IL, 1522–1527, 25 July.
   Google Scholar
• Bosioc, A.I., Susan-Resiga, R., Muntean, S., Tănasă, C. (2012). Unsteady pressure analysis of swirling flow with vortex rope and axial water injection in a discharge cone. J. Fluids Eng. Trans. ASME. 134(8), 081104:1–11.
   Web of Science ®Google Scholar
• Bruch, M., Münch, V., Aichinger, M., et al. (2011). Power blackout risks. CRO Forum, November.
   Google Scholar
• Chi-Jen, Y., Robert, J. (2011). Opportunities and barriers to pumped-hydro energy storage in the United States. Renew. Sustain. Energy Rev. 15, 839–844. doi: 10.1016/j.rser.2010.09.020
   Web of Science ®Google Scholar
• Chirag, T., Bhupendra, G., Cervantes, M. (2013a). Effect of transients on Francis turbine runner life: A review. J. Hydraulic Res. 51(2), 121–132. doi: 10.1080/00221686.2012.732971
   Web of Science ®Google Scholar
• Chirag, T., Cervantes, M., Bhupendra, G., Dalhaug, O. (2013b). Experimental and numerical studies for a high head Francis turbine at several operating points. J. Fluids Eng. Trans. ASME. 135(11), 111102:1–17.
   Web of Science ®Google Scholar
• Gagnon, M., Tahan, S.A., Bocher, P., Thibault, D. (2010). Impact of startup scheme on Francis runner life expectancy. IOP Conf. Ser. Earth Environ Sci. 12(1–9), 012107.
   Google Scholar
• Hasmatuchi, V., Farhat, M., Roth, S., Botero, F., Avellan, F. (2011). Experimental evidence of rotating stall in a pump-turbine at off-design conditions in generating mode. J. Fluids Eng. Trans. ASME. 133, 051101:1–8. doi: 10.1115/1.4004088
   Web of Science ®Google Scholar
• Huth, H.-J. (2005). Fatigue design of hydraulic turbine runners. PhD Thesis. NTNU, Norway.
   Google Scholar
• IEC 60041: 1991-11. Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines. ed. 3. International Electrotechnical Commission, Geneva.
   Google Scholar
• IEC 60193: 1999-11. Hydraulic turbines, storage pumps and pump-turbines – Model acceptance tests. International Electrotechnical Commission, Geneva.
   Google Scholar
• IEC 60308: 2005-01. Hydraulic turbines – Testing of control systems. International Electrotechnical Commission, Geneva.
   Google Scholar
• IEC 60545: 1976. Guide for commissioning, operation and maintenance of hydraulic turbines. International Electrotechnical Commission, Geneva.
   Google Scholar
• IEC 61362: 1998-03. Guide to specification of hydraulic turbine control systems. ed. 1. International Electrotechnical Commission, Geneva.
   Google Scholar
• Jacob, T. (1993). Evaluation sur modele reduit et prediction de la stabilite de functionnement des turbines Francis. PhD Thesis, no. 1146. EPFL, Lausanne, Switzerland.
   Google Scholar
• Matlab Release. (2012b). Getting started guide. The MathWorks, Inc., Natick, MA.
   Google Scholar
• Nicolet, C. (2007). Hydroacoustic modelling and numerical simulation of unsteady operation of hydroelectric systems. PhD Thesis. École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.
   Google Scholar
• Ramos, H., Almedia, B. (2001). Dynamic orifice model on water hammer analysis of high or medium heads of small hydro power schemes. J. Hydraulic Res. 39(4), 429–436. doi: 10.1080/00221680109499847
   Web of Science ®Google Scholar
• Roth, S., Hasmatuchi, V., Botero, F., Farhat, M., Avellan, F. (2010). Advanced instrumentation for measuring fluid-structure coupling phenomena in the guide vanes cascade of a pump-turbine scale model. Proc. ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th Int. Conf. Nanochannels, microchannels, and minichannels, FEDSM-ICNMM2010, Montreal, 1–5 August, 1–13.
   Google Scholar
• Staubli, T., Senn, F., Sallaberger, M. (2008). Instability of pump-turbines during start-up in turbine mode. Proc. Int. Conf. The 15th annual conference HYDRO 2008, Ljubljana, Slovenia, 6–8 October.
   Google Scholar
• Widmer, C., Staubli, T., Ledergerber, N. (2011). Unstable characteristics and rotating stall in turbine brake operation of pump-turbines. J. Fluids Eng. 133(4), 041101:1–9.
   Web of Science ®Google Scholar