701
Views
20
CrossRef citations to date
0
Altmetric
Research papers

Impact of sediment transport formulations on breaching modelling

, &
Pages 60-72 | Received 08 Oct 2013, Accepted 15 Jun 2014, Published online: 03 Oct 2014

References

  • Abad, J.D., Buscaglia, G.C., García, M.H. (2007). 2D stream hydrodynamic, sediment transport and bed morphology model for engineering applications. Hydrol. Process. 22(10), 1443–1459. doi: 10.1002/hyp.6697
  • Abrahams, A. (2003). Bed-load transport equation for sheet flow. J. Hydraulic Eng. 129(2), 159–163. doi: 10.1061/(ASCE)0733-9429(2003)129:2(159)
  • ASCE/EWRI Task Committee on Dam/Levee Breaching. (2011). Earthen embankment breaching. J. Hydraulic Eng. 137(12), 1549–1564. doi: 10.1061/(ASCE)HY.1943-7900.0000498
  • Camenen, B., Larson, M. (2005). A general formula for non-cohesive bed load sediment transport. Estuarine Coastal Shelf Sci. 63(1–2), 249–260. doi: 10.1016/j.ecss.2004.10.019
  • Cao, Z.X., Yue, Z.Y., Pender, G. (2011). Landslide dam failure and flood hydraulics. Part II: Coupled mathematical modelling. Nat. Hazards 59, 1021–1045. doi: 10.1007/s11069-011-9815-7
  • Cao, Z., Li, Z., Pender, G., Hu, P. (2012). Non-capacity or capacity model for fluvial sediment transport. Water Manage. ICE 165 (4), 193–211. doi: 10.1680/wama.10.00035
  • Cunge, J.A., Perdreau, N. (1973). Mobile bed fluvial mathematical models. Houille Blanche 28 (7), 561–580. doi: 10.1051/lhb/1973041
  • El Kadi Abderrezzak, K., Paquier, A. (2011). Applicability of sediment transport capacity formulas to dam-break flows over movable beds. J. Hydraulic Eng. 137(2), 209–221. doi: 10.1061/(ASCE)HY.1943-7900.0000298
  • Faeh, R. (2007). Numerical modeling of breach erosion of river embankments. J. Hydraulic Eng. 133(9), 1000–1009. doi: 10.1061/(ASCE)0733-9429(2007)133:9(1000)
  • Fernandez Luque, R., van Beek, R. (1976). Erosion and transport of bed-load sediment. J. Hydraulic Res. 14(2), 127–144. doi: 10.1080/00221687609499677
  • Fraccarollo, L., Capart, H., Zech, Y. (2003). A Godunov method for the computation of erosional shallow water transient. Int. J. Numer. Meth. Fluids 41, 951–976. doi: 10.1002/fld.475
  • Froehlich, D.C. (2008). Embankment dam breach parameters and their uncertainties. J. Hydraulic Eng. 134(12), 1708–1721. doi: 10.1061/(ASCE)0733-9429(2008)134:12(1708)
  • Gao, P. (2008). Transition between two bed-load transport regimes: Saltation and sheet flow. J. Hydraulic Eng. 134 (3), 340–349. doi: 10.1061/(ASCE)0733-9429(2008)134:3(340)
  • Goutière, L., Soares-Frazão, S., Savary, C., Laraichi, T., Zech, Y. (2008). One-dimensional model for transient flows involving bedload sediment transport and changes in flow regimes. J. Hydraulic Eng. 134 (6), 726–735. doi: 10.1061/(ASCE)0733-9429(2008)134:6(726)
  • Meyer-Peter, E., Müller, R. (1948). Formulas for bed load transport. Proc. 2nd IAHR Congress, Stockholm, Sweden, 39–64.
  • Morris, M.W., Hassan, M.A.A.M., Vaskinn, K.A. (2007). Breach formation: Field test and laboratory experiments. J. Hydraulic Res. 45(Suppl. 1), 9–17. doi: 10.1080/00221686.2007.9521828
  • Phillips, B.C., Sutherland, A.J. (1989). Spatial lag effects in bedload sediment transport. J. Hydraulic Res. 27 (1), 115–133. doi: 10.1080/00221688909499247
  • Pontillo, M., Schmocker, L., Greco, M., Hager, W.H. (2010). 1D numerical evaluation of dike erosion due to overtopping. J. Hydraulic Res. 48 (8), 573–582. doi: 10.1080/00221686.2010.507005
  • Powledge, G.R., Ralston, D.C., Miller, P., Chen, Y.H., Clopper, P.E., Temple, D.M. (1989). Mechanics of overflow erosion on embankments. I: Research activities; II/hydraulic and design considerations. J. Hydraulic Eng. 115(8), 1040–1075. doi: 10.1061/(ASCE)0733-9429(1989)115:8(1040)
  • Schmocker, L., Hager, W.H. (2009). Modelling dike breaching due to overtopping. J. Hydraulic Res. 47 (5), 585–597. doi: 10.3826/jhr.2009.3586
  • Schmocker, L., Halldórsdóttir, B.R., Hager, W.H. (2011). Effect of weir face angles on circular-crested weir flow. J. Hydraulic Eng. 137(6), 637–643. doi: 10.1061/(ASCE)HY.1943-7900.0000346
  • Smart, G.M., Jäggi, M.N.R. (1983). Sediment transport on steep slopes. Mitteilungen der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, 64. Eidgenössische Technische Hochschule (ETH), Zürich, Switzerland
  • Soares-Frazão, S., Zech, Y. (2010). HLLC scheme with appropriate wave-speed estimators for two-dimensional shallow-water flow on erodible bed. Int. J. Numer. Meth. Fluids 66(8), 1019–1036. doi: 10.1002/fld.2300
  • Spinewine, B., Delobbe, A., Elslander, L., Zech, Y. (2004). Experimental investigation of the breach growth process in sand dikes. Proc. River Flow 2004, 2, Naples, Italy, 983–991.
  • Strickler, A. (1923). Beitraege zur Frage der Geschwindigkeits-formel und der Rauhigkeitszahlen für Ströme, Kanäle und geschlossene Leitungen. Mitteilung 16. Eidgenössisches Amt für Wasserwirtschaft, Bern, Switzerland (in German).
  • Sumer, B.M., Kozakiewicz, A., Fredsoe, J., Deigaard, R. (1996). Velocity and concentration profiles in sheet-flow layer of movable bed. J. Hydraulic Eng. 122(10), 549–558. doi: 10.1061/(ASCE)0733-9429(1996)122:10(549)
  • Swartenbroekx, C., Soares-Frazão, S., Staquet, R., Zech, Y. (2010). Two-dimensional operator for bank failures induced by water-level rise in dam-break flows. J. Hydraulic Res. 48(3), 302–314. doi: 10.1080/00221686.2010.481856
  • Van Emelen, S. (2013). Erosion modeling over a steep slope: Application to a dike overtopping test case. Proc. 35th IAHR World Congress, Chengdu, China, 10 pages.
  • Van Emelen, S., Swartenbroekx, C., Zech, Y., Soares-Frazão, S. (2011). Numerical modelling of the breaching process in an earthen dike. Proc. 5th International Conference on Advanced Computational Methods in Engineering (ACOMEN 2011), Liège, Belgium, 10 pages.
  • Van Emelen, S., Ferbus, V., Spitaels, T., Zech, Y., Soares-Frazão, S. (2013). Experimental investigation of the erosion of a sand dike by overtopping. Proc. 35th IAHR World Congress, Chengdu, China, 9 pages.
  • Visser, P.J. (1998). Breach growth in sand-dikes. PhD Thesis and Communications on Hydraulic and Geotechnical Engineering Series, Report 98-1, Delft University of Technology, Delft, The Netherlands.
  • Wang, Z., Bowles, D.S. (2006). Three-dimensional non-cohesive earthen dam breach model. Part 2: Validation and applications. Adv. Water Resour. 29(10), 1490–1503. doi: 10.1016/j.advwatres.2005.11.010
  • Wilson, K.C. (1987). Analysis of bed-load motion at high shear stress. J. Hydraulic Eng. 113(1), 97–103. doi: 10.1061/(ASCE)0733-9429(1987)113:1(97)
  • Wong, M., Parker, G. (2006). Reanalysis and correction of bed-load relation of Meyer-Peter and Müller using their own database. J. Hydraulic Eng. 132(11), 1161– 1168.
  • Wu, W. (2004). Depth-averaged two-dimensional numerical modeling of unsteady flow and non-uniform sediment transport in open channels. J. Hydraulic Eng. 130(10), 1013–1024. doi: 10.1061/(ASCE)0733-9429(2004)130:10(1013)
  • Wu, W., Wang, S.S.Y., Jia, Y. (2000). Nonuniform sediment transport in alluvial rivers. J. Hydraulic Res. 38(6), 427–434. doi: 10.1080/00221680009498296
  • Wu, W., Marsooli, R., He, Z. (2012). Depth-averaged two-dimensional model of unsteady flow and sediment transport due to noncohesive embankment break/breaching. J. Hydraulic Eng. 138(6), 503–516. doi: 10.1061/(ASCE)HY.1943-7900.0000546

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.