1D morphodynamic modelling using a simplified grain size description

References

• Armanini, A., & di Silvio, G. (1986). Discussion of “A depth-integrated model for suspended sediment transport” by G. Galappatti and C. B. Vreugdenhil. Journal of Hydraulic Research, 24(5), 437–442. doi: 10.1080/00221688609499319
   Web of Science ®Google Scholar
• Armanini, A., & di Silvio, G. (1988). A one-dimensional model for the transport of a sediment mixture in non-equilibrium conditions. Journal of Hydraulic Research, 26(3), 275–292. doi: 10.1080/00221688809499212
   Web of Science ®Google Scholar
• Ashida, K., & Michiue, M. (1971). An investigation of river bed degradation downstream of a dam. In Proceedings of the 14th IAHR Congress, Paris, France.
   Google Scholar
• Balayn, P. (2001). Contribution ‘a la modélisation numérique de l’évolution morphologique des cours d'eau aménagés lors de crues [A contribution to numerical modelling of bed evolution of channelized stream during floods] (Unpublished doctoral dissertation). Claude Bernard University, Lyon, France, Lyon 1.
   Google Scholar
• Bell, R. G., & Sutherland, A. J. (1983). Nonequilibrium bed-load transport by steady flow. Journal of Hydraulic Engineering, 109(3), 351–367. doi: 10.1061/(ASCE)0733-9429(1983)109:3(351)
   Web of Science ®Google Scholar
• Belleudy, Ph. (2000). Numerical simulation of sediment mixture deposition, part 1: Analysis of a flume experiment. Journal of Hydraulic Research, 38(6), 417–425. doi: 10.1080/00221680009498295
   Web of Science ®Google Scholar
• Belleudy, Ph. (2001). Numerical simulation of sediment mixture deposition, part 2: A sensitivity analysis. Journal of Hydraulic Research, 39(1), 25–31. doi: 10.1080/00221680109499799
   Web of Science ®Google Scholar
• Béraud, C. (2012). Modélisation numérique des impacts de recharges sédimentaires en rivière aménagée. Cas du Vieux-Rhin entre Kembs et Breisach [Numerical modelling of the sediment feeding impacts in engineered rivers. The case of the Old Rhine, between Kembs and Brisach] (Unpublished doctoral dissertation). C. Bernard University, Lyon, France, Lyon 1.
   Google Scholar
• Béraud, C., Le Coz, J., Camenen, B., & Paquier, A. (2011). 1D numerical simulation of sediment downstream fining during bed aggradation using a simplified grain size description. In Proceedings of the 7th IAHR symposium on River, Coastal and Estuarine Morphodynamics (pp. 1–10). Beijing, China. (CD Rom)
   Google Scholar
• Blom, A. (2008). Different approaches to handling vertical and streamwise sorting in modeling river morphodynamics. Water Resources Research, 44(3), 1–16. doi: 10.1029/2006WR005474
   Web of Science ®Google Scholar
• Camenen, B., Grabowski, R. C., Latapie, A., Paquier, A., Solari, L., & Rodrigues, S. (2016). On the estimation of the bed-material transport and budget along a river segment: Application to the middle Loire river, France. Aquatic Sciences, 78, 71–81. doi: 10.1007/s00027-015-0442-3
   Web of Science ®Google Scholar
• Camenen, B., Holubová, K., Lukac̆, M., Le Coz, J., & Paquier, A. (2011). Assessment of methods used in 1D models for computing bed-load transport in a large river: The Danube river in Slovakia. Journal of Hydraulic Engineering, 137(10), 1190–1199. doi: 10.1061/(ASCE)HY.1943-7900.0000427
   Web of Science ®Google Scholar
• Camenen, B., & Larson, M. (2005). A bedload sediment transport formula for the nearshore. Estuarine, Coastal & Shelf Science, 63, 249–260. doi: 10.1016/j.ecss.2004.10.019
   Web of Science ®Google Scholar
• Colombini, M., Seminara, G., & Tubino, M. (1987). Finite-amplitude alternate bars. Journal of Fluid Mechanics, 181, 213–232. doi: 10.1017/S0022112087002064
   Web of Science ®Google Scholar
• Cui, Y., Paola, C., & Parker, G. (1996). Numerical simulation of aggradation and downstream fining. Journal of Hydraulic Research, 34(2), 185–204. doi: 10.1080/00221689609498496
   Web of Science ®Google Scholar
• Cui, Y., & Parker, G. (1998). The arrested gravel front: Stable gravel-sand transitions in rivers; Part 2: General numerical solution. Journal of Hydraulic Research, 36(2), 159–182. doi: 10.1080/00221689809498631
   Web of Science ®Google Scholar
• Daubert, A., & Lebreton, J. C. (1967). Etude expérimentale et sur modèle mathématique de quelques aspects des processus d'érosion des lits alluvionnaires, en régime permanent et non-permanent [Study with a mathematic model on some erosion processes in alluvial rivers for steady and unsteady regimes]. In Proceedings of the 12th IAHR Congress Congress (vol. 3, pp. 26-37). Fort Collins, CO, USA.
   Google Scholar
• Deigaard, R. (1980). Longitudinal and transverse sorting of grain sizes in alluvial rivers (series paper No. 26). Denmark: Institute for Hydrodynamic and Hydraulic Engineering, Technical Univiversity of Denmark.
   Google Scholar
• di Silvio, G.. (1992). Modelling sediment transport under different hydrological and morphological circumstances. In P. Billi, R. D. Hey, C. R. Thorne, & P. Tacconi (Eds.), Gravel bed river III: Dynamics of gravel-bed rivers (pp. 363–372). Chichester: John Wiley and Sons.
   Google Scholar
• Egiazaroff, I. V. (1955). Calculation of nonuniform sediment concentrations. Journal of Hydraulic Division, 91(HY4), 225–253.
   Google Scholar
• El kadi Abderrezzak, K., & Paquier, A. (2009). One-dimensional numerical modeling of sediment transport and bed deformation in open channels. Water Resources Research, 45(5), 1–20. doi: 10.1029/2008WR007134
   Web of Science ®Google Scholar
• El kadi Abderrezzak, K., & Paquier, A. (2011). Applicability of sediment transport capacity formulas to dam-break flows over movable beds. Journal of Hydraulic Engineering, 137(2), 209–221. doi: 10.1061/(ASCE)HY.1943-7900.0000298
   Web of Science ®Google Scholar
• El kadi Abderrezzak, K., Paquier, A., & Gay, B. (2008). One-dimensional numerical modelling of dam-break waves over movable beds: Application to experimental and field cases. Environmental Fluid Mechanics, 8(2), 169–198. doi: 10.1007/s10652-008-9056-9
   Web of Science ®Google Scholar
• Ferguson, R. I., Church, M., & Weatherly, H. (2001). Fluvial aggradation in vedder river: Testing a one-dimensional sedimentation model. Water Resources Research, 37(12), 3331–3347. doi: 10.1029/2001WR000225
   Web of Science ®Google Scholar
• Ferguson, R. I., & Wathen, S. J. (1998). Tracer-pebble movement along a concave river profile: Virtual velocity in relation to grain size and shear stress. Water Resources Research, 34(8), 2031–2038. doi: 10.1029/98WR01283
   Web of Science ®Google Scholar
• Gomez, B., Rosser, B. J., Peacock, D. H., Murray Hicks, D. H., & Palmer, J. A. (2001). Downstream fining in a rapidly aggrading gravel bed river. Water Resources Research, 37(6), 1813–1823. doi: 10.1029/2001WR900007
   Web of Science ®Google Scholar
• Hirano, M. (1971). River bed degradation with armouring. Transaction of the Japanese Society of Civil Engineering, 3(2), 55–65. (In Japanese).
   Google Scholar
• Hoey, T. B., & Ferguson, R. (1994). Numerical simulation of downstream fining by selective transport in gravel bed rivers: Model development and illustration. Water Resources Research, 30(7), 2251–2260. doi: 10.1029/94WR00556
   Web of Science ®Google Scholar
• Klingeman, P. C., Chaquette, C. J., & Hammond, S. B. (1979). Bed material characteristics near Oak Creek sediment research facilities (Technical Report). Corvallis, OR: Water Resources Research Institute, Oregon State University.
   Google Scholar
• Langendoen, E. J., & Alonso, C. V. (2008). Modeling the evolution of incised streams: I. Model formulation and validation of flow and streambed evolution components. Journal of Hydraulic Engineering, 134(6), 749–762. doi: 10.1061/(ASCE)0733-9429(2008)134:6(749)
   Web of Science ®Google Scholar
• Meyer-Peter, E., & Müller, R. (1948). Formulas for bed-load transport. In Proceedings of the 2nd IAHR Congress (pp. 39-64), Stockholm, Sweden.
   Google Scholar
• Mikos̃, M. (1993). Fluvial abrasion of gravel sediments (Technical Report No. 123). Zurich: Miteilungen der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie der ETH Zürich.
   Google Scholar
• Morris, P. H., & Williams, D. J. (1999). A worldwide correlation for exponential bed particle size variation in subaerial aqueous flows. Earth Surface Processes & Landforms, 24, 835–847. doi: 10.1002/(SICI)1096-9837(199908)24:9<835::AID-ESP15>3.0.CO;2-G
   Web of Science ®Google Scholar
• Paola, C., & Seal, R. (1995). Grain size patchiness as a cause of selective deposition and downstream fining. Water Resources Research, 31(5), 1395–1407. doi: 10.1029/94WR02975
   Web of Science ®Google Scholar
• Paquier, A., & El Kadi Abderrezzak, K. (2008). A model for bedload transport and morphological evolution in rivers: Description and pertinence. In S. Benzoni Gavage & D. Serre (Eds.), Hyperbolic problems: Theory, numerics, applications (pp. 285–296). Berlin: Springer.
   Google Scholar
• Parker, G. (1990). Surface-based bedload transport relation for gravel rivers. Journal of Hydraulic Research, 28(4), 417–436. doi: 10.1080/00221689009499058
   Web of Science ®Google Scholar
• Parker, G. (1991). Selective sorting and abrasion of river gravel. I: Theory. Journal of Hydraulic Engineering, 117(2), 131–147. doi: 10.1061/(ASCE)0733-9429(1991)117:2(131)
   Web of Science ®Google Scholar
• Parker, G., & Cui, Y. (1998). The arrested gravel front: Stable gravel-sand transitions in rivers; Part 1: Simplified analytical solution. Journal of Hydraulic Research, 36(1), 75–100. doi: 10.1080/00221689809498379
   Web of Science ®Google Scholar
• Phillips, B. C., & Sutherland, A. J. (1989). Spatial lag effects in bed-load sediment transport. Journal of Hydraulic Research, 27(1), 115–133. doi: 10.1080/00221688909499247
   Web of Science ®Google Scholar
• Qian, H., Cao, Z., Pender, G., Liu, H., & Hu, P. (2015). Well-balanced numerical modelling of non-uniform sediment transport in alluvial rivers. International Journal of Sediment Research, 30, 117–130. doi: 10.1016/j.ijsrc.2015.03.002
   Web of Science ®Google Scholar
• Rahuel, J. L., Holly, F. M., Chollet, J. P., Belleudy, P. J., & Yang, G. (1989). Modeling of riverbed evolution for bedload sediment mixtures. Journal of Hydraulic Engineering, 115(11), 1521–1542. doi: 10.1061/(ASCE)0733-9429(1989)115:11(1521)
   Web of Science ®Google Scholar
• Recking, A. (2013). Simple method for calculating reach-averaged bed-load transport. Journal of Hydraulic Engineering, 139(1), 70–75. doi: 10.1061/(ASCE)HY.1943-7900.0000653
   Web of Science ®Google Scholar
• Seal, R., Paola, C., Parker, G., Southard, J. B., & Wilcock, P. R. (1997). Experiments on downstream fining of gravels: I. Narrow-channel runs. Journal of Hydraulic Engineering, 123(10), 874–884. doi: 10.1061/(ASCE)0733-9429(1997)123:10(874)
   Web of Science ®Google Scholar
• Seal, R., Parker, G., & Mullenbach, C. P. B. (1995). Laboratory experiments on downstream fining og gravel, narrow channel runs 1 through 3: Supplemental methods and data (External Memorandum No. 239). University of Minnesota, MN: St Anthony Falls Laboratory.
   Google Scholar
• Stecca, G., Siviglia, A., & Blom, A. (2014). Mathematical analysis of the Saint-Venant-Hirano model for mixed-sediment morphodynamics. Water Resources Research, 50, 7563–7589. doi: 10.1002/2014WR015251
   Web of Science ®Google Scholar
• Sternberg, H. (1875). Untersuchungen über längen- und querprofil geschiebeführender flüsse [Study on the longitudinal and transversal bed-load transport in rivers]. Zeitschrift Bauwesen, 25, 483–506.
   Google Scholar
• Strickler, A. (1923). Beiträge zur frage der geschwindigkeitsformel und der rauhigkeitszahlen für ströme, kanäle und geschlossene leitungen [Contributions to the questions of velocity formulations and roughness values for rivers, canals, and closed ducts] (Mitteilung No. 16). Bern: Amt für Wasserwirtschaft.
   Google Scholar
• Surian, N. (2002). Downstream variation in grain size along an alpine river: Analysis of controls and processes. Geomorphology, 43, 137–149. doi: 10.1016/S0169-555X(01)00127-1
   Web of Science ®Google Scholar
• Toro-Escobar, C. M., Paola, C., & Parker, G. (1997). Transfer function for the deposition of poorly sorted gravel in response to streambed aggradation. Journal of Hydraulic Research, 35(4), 563–566. doi: 10.1080/00221689709498411
   Web of Science ®Google Scholar
• Toro-Escobar, C. M., Paola, C., Parker, G., Wilcock, P. R., & Southard, J. B. (2000). Experiments on downstream fining of gravel. II: Wide and sandy runs. Journal of Hydraulic Engineering, 126(3), 198–208. doi: 10.1061/(ASCE)0733-9429(2000)126:3(198)
   Web of Science ®Google Scholar
• van Niekerk, A., Vogel, K. R., Slingerland, R. L., & Bridge, J. S. (1992). Routing of heterogeneous sediments over movable bed: Model development. Journal of Hydraulic Engineering, 118(2), 246–262. doi: 10.1061/(ASCE)0733-9429(1992)118:2(246)
   Web of Science ®Google Scholar
• Viparelli, E., Sequeiros, O. E., Cantelli, A., Wilcock, P. R., & Parker, G. (2010). River morphodynamics with creation/consumption of grain size stratigraphy 2: Numerical model. Journal of Hydraulic Research, 48(6), 727–741. doi: 10.1080/00221686.2010.526759
   Web of Science ®Google Scholar
• Vogel, K. R., van Niekerk, A., Slingerland, R. L., & Bridge, J. S. (1992). Routing of heterogeneous sediments over movable bed: Model verification. Journal of Hydraulic Engineering, 118(2), 263–279. doi: 10.1061/(ASCE)0733-9429(1992)118:2(263)
   Web of Science ®Google Scholar
• Wilcock, P. R., & Crowe, J. C. (2003). Surface-based transport model for mixed-size sediment. Journal of Hydraulic Engineering, 129(2), 120–128. doi: 10.1061/(ASCE)0733-9429(2003)129:2(120)
   Web of Science ®Google Scholar
• Wright, S., & Parker, G. (2005). Modeling downstream fining in sand-bed rivers. II: Application. Journal of Hydraulic Research, 43(6), 621–631. doi: 10.1080/00221680509500382
   Web of Science ®Google Scholar
• Wu, W., Viera, D. A., & Wang, S. S. Y. (2004). One-dimensional numerical model for nonuniform sediment transport under unsteady flows in channel networks. Journal of Hydraulic Engineering, 130(9), 914–923. doi: 10.1061/(ASCE)0733-9429(2004)130:9(914)
   Web of Science ®Google Scholar
• Wu, W., & Wang, S. S. Y. (2007). One-dimensional modeling of dam-break flow over movable beds. Journal of Hydraulic Engineering, 133(1), 48–58. doi: 10.1061/(ASCE)0733-9429(2007)133:1(48)
   Web of Science ®Google Scholar
• Wu, W., & Wang, S. S. Y. (2008). One-dimensional explicit finite-volume model for sediment transport. Journal of Hydraulic Research, 46(1), 87–98. doi: 10.1080/00221686.2008.9521846
   Web of Science ®Google Scholar
• Wu, W., Wang, S. S. Y., & Jia, Y. F. (2000). Nonuniform sediment transport in alluvial rivers. Journal of Hydraulic Research, 38(6), 427–434. doi: 10.1080/00221680009498296
   Web of Science ®Google Scholar
• Yu, A. B., Standish, N., & McLean, A. (1993). Porosity calculation of binary mixtures of nonspherical particles. Journal of the American Ceramic Society, 76(11), 2813–2816. doi: 10.1111/j.1151-2916.1993.tb04021.x
   Web of Science ®Google Scholar