Morphological Distribution in Micro-Injected Polypropylene Parts in the Presence of β-Nucleating Agent

References

• Yu , L. Y. , Koh , C. G. , Lee , L. J. , Koelling , K. W. and Madou , M. J. 2002 . Experimental investigation and numerical simulation of injection molding with micro-features . Polym. Eng. Sci , 42 : 871
   Web of Science ®Google Scholar
• Piotter , V. , Mueller , K. , Plewa , K. , Ruprecht , R. and Hausselt , J. 2002 . Performance and simulation of thermoplastic micro injection molding . Microsyst. Technol , 8 : 387
   Web of Science ®Google Scholar
• Sha , B. , Dimov , S. , Griffiths , C. and Packianather , M. S. 2007 . Investigation of micro-injection moulding: Factors affecting the replication quality . J. Mater. Process. Tech. , 183 : 284
   Web of Science ®Google Scholar
• Ruprecht , R. , Gietzelt , T. , Muller , K. , Piotter , V. and Hausselt , J. 2002 . Injection molding of microstructured components from plastics, metals and ceramics . Microsyst. Technol. , 8 : 351
   Web of Science ®Google Scholar
• Piotter , V. , Bauer , W. , Benzler , T. and Emde , A. 2001 . Injection molding of components for microsystems . Microsyst. Technol. , 7 : 99
   Web of Science ®Google Scholar
• Liou , A. C. and Chen , R. H. 2006 . Injection molding of polymer micro- and sub-micron structures with high-aspect ratios . Int. J. Adv. Manuf. Tech. , 28 : 1097
   Web of Science ®Google Scholar
• Ruprecht , R. , Hanemann , T. , Piotter , V. and Hausselt , J. 1998 . Polymer materials for microsystem technologies . Microsyst. Technol. , 5 : 44
   Web of Science ®Google Scholar
• Varga , J. 2002 . β-modification of isotactic polypropylene: Preparation, structure, processing, properties, and application . J. Macromol. Sci. Phys. , B41 : 1121
   Web of Science ®Google Scholar
• Leugering , H. J. 1967 . Einfluß der kristallstruktur und der überstruktur auf einige eigenschaften von polypropylen [Influence of the crystal structure and the structure of some properties of polypropylene] . Makromol. Chem. , 109 : 204
   Google Scholar
• Shi , G. , Zhang , X. and Qiu , Z. 1992 . Crystallization kinetics of β-phase polypropylene . Makromol. Chem. , 193 : 583
   Web of Science ®Google Scholar
• Ikeda , N. , Kobayashi , T. and Killough , L. September 1996 . “ Novel β-nucleator for polypropylene; Polypropylene '96 ” . Zurich , , Switzerland : World Congress .
   Google Scholar
• Varga , J. , Mudra , I. and Ehrenstein , G. W. 1999 . Highly active thermally stable β-nucleating agents for isotactic polypropylene . J. Appl. Polym. Sci. , 74 : 2357
   Web of Science ®Google Scholar
• Mathieu , C. , Thierry , A. , Wittmann , J. C. and Lotz , B. 2002 . Specificity and versatility of nucleating agents toward isotactic polypropylene crystal phases . J. Polym. Sci., Part B: Polym. Phys. , 40 : 2504
   Web of Science ®Google Scholar
• Fujiwara , Y. 1975 . Das Doppelschmelzverhalten der β-Phase des isotaktischen polypropylens [The double melting behavior of the β-phase of isotactic polypropylene]. Colloid. Polym. Sci . 253 : 273
   Google Scholar
• Jones , A. T. , Aizlewood , J. M. and Beckett , D. R. 1964 . Crystalline forms of isotactic polypropylene . Makromol. Chem. , 75 : 134
   Google Scholar
• Leugering , H. J. and Kirsch , G. 1973 . Beeinflussung der kristallstruktur von isotaktischem polypropylen durch kristallisation aus orientierten schmelzen . Angew. Makromol. Chem. , 33 : 17
   Google Scholar
• Varga , J. and KargerKocsis , J. 1996 . Rules of supermolecular structure formation in sheared isotactic polypropylene melts . J. Polym. Sci., Part B: Polym. Phys. , 34 : 657
   Web of Science ®Google Scholar
• Somani , R. H. , Hsiao , B. S. , Nogales , A. , Fruitwala , H. , Srinivas , S. and Tsou , A. H. 2001 . Structure development during shear flow induced crystallization of i-PP: In situ wide-angle X-ray diffraction study . Macromolecules , 34 : 5902
   Web of Science ®Google Scholar
• KargerKocsis , J. , Varga , J. and Ehrenstein , G. W. 1997 . Comparison of the fracture and failure behavior of injection-molded α- and β-polypropylene in high-speed three-point bending tests . J. Polym. Sci., Part B: Polym. Phys , 64 : 2057
   Web of Science ®Google Scholar
• KargerKocsis , J. and Varga , J. 1996 . Effects of β-α transformation on the static and dynamic tensile behavior of isotactic polypropylene . J. Appl. Polym. Sci. , 62 : 291
   Web of Science ®Google Scholar
• Chen , H. B. , Karger-Kocsis , J. , Wu , J. S. and Varga , J. 2002 . Fracture toughness of α- and β-phase polypropylene homopolymers and random- and block-copolymers . Polymer , 43 : 6505
   Web of Science ®Google Scholar
• Ferro , D. R. , Meille , S. V. and Brckner , S. 1998 . Energy calculations for isotactic polypropylene: A contribution to clarify the β crystalline structure . Macromolecules , 31 : 6926
   Web of Science ®Google Scholar
• Addink , E. J. and Beintema , J. 1961 . Polymorphism of crystalline polypropylene . Polymer , 2 : 185
   Web of Science ®Google Scholar
• Natta , G. , Peraldo , M. and Corradini , P. 1959 . Smectic mesomorphic form of isotactic polypropylene . Rend. Accad. Naz. Lincei. , 26 : 14
   Google Scholar
• Poncin-Epaillard , F. , Brosse , J. C. and Falher , T. 1997 . Cold plasma treatment: Surface or bulk modification of polymer films? . Macromolecules , 30 : 4415
   Web of Science ®Google Scholar
• Kumaraswamy , G. 2005 . Crystallization of polymers from stressed melts. J. Macromol . Sci-Polym. Rev. , C45 : 375
   Web of Science ®Google Scholar
• Viana , J. C. 2004 . Development of the skin layer in injection moulding: Phenomenological model . Polymer , 45 : 993
   Web of Science ®Google Scholar
• Schrauwen , B. A.G. , Von Breemen , L. C.A. , Spoelstra , A. B. , Govaert , L. E. , Peters , G. W.M. and Meijer , H. E.H. 2004 . Structure, deformation, and failure of flow-oriented semicrystalline polymers . Macromolecules , 37 : 8618
   Web of Science ®Google Scholar
• Fujiyama , M. and Zuma , K. 1979 . Skin/core morphology and tensile impact strength of injection-molded polypropylene . J. Appl. Polym. Sci. , 23 : 2807
   Web of Science ®Google Scholar
• Zheng , G. Q.A. , Huang , L. , Yang , W. , Yang , B. , Yang , M. B. , Li , Q. and Shen , C. Y. 2007 . Hierarchical crystalline structure of HDPE molded by gas-assisted injection molding . Polymer , 48 : 5486
   Web of Science ®Google Scholar
• Ratta , V. , Wilkes , G. L. and Su , T. K. 2001 . Structure-property-processing investigations of the tenter-frame process for making biaxially oriented HDPE film. I. Base sheet and draw along the MD . Polymer , 42 : 9059
   Web of Science ®Google Scholar
• Keller , A. and Kolnaar , H. W. 1997 . Flow-induced orientation and structure formation . Mater. Sci. Technol. , 18 : 189
   Google Scholar
• Somani , R. H. , Yang , L. , Hsiao , B. S. , Agarwal , P. K. , Fruitwala , H. A. and Tsou , A. H. 2002 . Shear-induced precursor structures in isotactic polypropylene melt by in-situ rheo-SAXS and rheo-WAXD studies . Macromolecules , 35 : 9096
   Web of Science ®Google Scholar
• Kalay , G. and Bevis , M. J. 1997 . Processing and physical property relationships in injection molded isotactic polypropylene .1. Mechanical properties . J. Polym. Sci., Part B: Polym. Phys. , 35 : 241
   Web of Science ®Google Scholar
• Chen , Y. H. , Zhong , G. J. , Wang , Y. , Li , Z. M. and Li , L. B. 2009 . Unusual tuning of mechanical properties of isotactic polypropylene using counteraction of shear flow and β-nucleating agent on β-form nucleation . Macromolecules , 42 : 4343
   Web of Science ®Google Scholar
• Su , R. , Zhang , Z. Q. , Gao , X. , Ge , Y. A. , Wang , K. and Fu , Q. 2010 . Polypropylene injection molded part with novel macroscopic bamboo-like bionic structure . J. Phys. Chem. B , 114 : 9994
   PubMed Web of Science ®Google Scholar
• Whiteside , B. R. , Martyn , M. T. , Coates , P. D. , Allan , P. S. , Hornsby , P. R. and Greenway , G. 2003 . Micromoulding: Process characteristics and product properties . Plast. Rubber. Compos. , 32 : 231
   Web of Science ®Google Scholar
• Giboz , J. , Copponnex , T. and Mele , P. 2007 . Microinjection molding of thermoplastic polymers: A review . J. Micromech. Microeng. , 17 : 96
   Web of Science ®Google Scholar
• Yao , D. G. and Kim , B. 2002 . Simulation of the filling process in micro channels for polymeric materials . J. Micromech. Microeng. , 12 : 604
   Web of Science ®Google Scholar
• Chien , R. D. , Jong , W. R. and Chen , S. C. 2005 . Study on rheological behavior of polymer melt flowing through micro-channels considering the wall-slip effect . J. Micromech. Microeng. , 15 : 1389
   Web of Science ®Google Scholar
• Whiteside , B. R. , Martyn , M. T. , Coates , P. D. , Allan , P. S. , Hornsby , P. R. and Greenway , G. 2003 . Micromoulding: Process characteristics and product properties . Plast. Rubber. Compos. , 32 : 231
   Web of Science ®Google Scholar
• Attia , U. M. , Marson , S. and Alcock , J. R. 2009 . Micro-injection moulding of polymer microfluidic devices . Microfluid. Nanofluid , 7 : 1
   Web of Science ®Google Scholar
• Ito , H. , Yagisawa , Y. , Saito , T. , Yasuhara , T. , Kikutani , T. and Yoshitoshi , Y. 2005 . Fundamental study on structure development of thin-wall injection molded products . Theor. Appl. Mech. Japan , 54 : 263
   Google Scholar
• Ito , H. , Kikutani , T. and Kasama , K. Surface replication and structural development in micromolding for micro/nanocomposites . Vol. October , pp. 15 – 18 . Atlanta , GA : Proceeding of the ASME International Manufacturing Science and Engineering Conference .
   Google Scholar
• Giboz , J. , Copponnex , T. and Mele , P. 2009 . Microinjection molding of thermoplastic polymers: Morphological comparison with conventional injection molding . J. Micromech. Microeng. , 19 : 1
   Web of Science ®Google Scholar
• Lu , Z. and Zhang , K. F. 2009 . Crystal distribution and molecule orientation of micro injection molded polypropylene microstructured parts . Polym. Eng. Sci. , 49 : 1661
   Web of Science ®Google Scholar
• Liu , F. , Guo , C. , Wu , X. , Qian , X. and Liu , H. 2011 . Zhang, J. Morphological comparison of isotactic polypropylene parts prepared by micro-injection molding and conventional injection molding. Polym. Adv . 23 DOI: 10.1002/pat.1946
   Google Scholar
• Olleya , R. H. and Bassetta , D. C. 2003 . An improved permanganic etchant for polyolefines . Polymer , 23 : 1707
   Web of Science ®Google Scholar
• Li , J. X. and Cheung , W. L. 1998 . On the deformation mechanisms of β-polypropylene: 1. Effect of necking on β-phase PP crystals . Polymer , 39 : 6935
   Web of Science ®Google Scholar
• Pantani , R. , Coccorullo , I. , Speranza , V. and Titomanlio , G. 2005 . Modeling of morphology evolution in the injection molding process of thermoplastic polymers . Prog. Polym. Sci. , 30 : 1185
   Web of Science ®Google Scholar
• Kantz , M. R. , Newman , H. D. and Stigale , F. H. 1972 . The skin-core morphology and structure-property relationships in injection-molded polypropylene . J. Appl. Polym. Sci. , 16 : 1249
   Web of Science ®Google Scholar
• Fujiyama , M. , Wakino , T. and Kawasaki , Y. 1998 . Structure of skin layer in injection-molded polypropylene . J. Appl. Polym. Sci. , 35 : 29
   Web of Science ®Google Scholar
• Lotz , B. , Wittmann , C. and Lovinger , A. 1996 . Structure and morphology of poly(propylenes): A molecular analysis . Polymer , 37 : 4979
   Web of Science ®Google Scholar
• Varga , J. and Ehrenstein , G. W. 1996 . Formation of β-modification of isotactic polypropylene in its late stage of crystallization . Polymer , 37 : 5959
   Web of Science ®Google Scholar
• Lotz , B. 1998 . α and β phases of isotactic polypropylene: A case of growth kinetics ‘phase reentrency’ in polymer crystallization . Polymer , 39 : 4561
   Web of Science ®Google Scholar
• Huo , H. , Jiang , S. J. , An , L. and Feng , J. C. 2004 . Influence of shear on crystallization behavior of the β phase in isotactic polypropylene with β-nucleating agent . Macromolecules , 37 : 2478
   Web of Science ®Google Scholar