References
- Brebu, M. Environmental Degradation of Plastic Composites with Natural Fillers—a Review. Polymers 2020, 12, 166–187. DOI: https://doi.org/10.3390/polym12010166.
- Kumar, R.; Kumar, K.; Bhowmik, S.; Sarkhel, G. Tailoring the Performance of Bamboo Filler Reinforced Epoxy Composite: Insights into Fracture Properties and Fracture Mechanism. J. Polym. Res. 2019, 26, 54–68. DOI: https://doi.org/10.1007/s10965-019-1720-x.
- Dobrzyńska-Mizera, M.; Knitter, M.; Barczewski, M. Walnut Shells as a Filler for Polymeric Materials. Drewno: prace Naukowe, Doniesienia, Komunikaty 2019, 62, 153–168. DOI: https://doi.org/10.12841/wood.1644-3985.D12.02.
- Montava-Jordà, S.; Quiles-Carrillo, L.; Richart, N.; Torres-Giner, S.; Montanes, N. Enhanced Interfacial Adhesion of Polylactide/Poly (Ε-Caprolactone)/Walnut Shell Flour Composites by Reactive Extrusion with Maleinized Linseed Oil. Polymers 2019, 11, 758–778. DOI: https://doi.org/10.3390/polym11050758.
- Tian, H.; Yao, Y.; Liu, D.; Li, Y.; Jv, R.; Xiang, G.; Xiang, A. Enhanced Interfacial Adhesion and Properties of Polypropylene/Carbon Fiber Composites by Fiber Surface Oxidation in Presence of a Compatibilizer. Polym. Compos. 2019, 40, E654–E662. DOI: https://doi.org/10.1002/pc.24938.
- Dinesh, S.; Kumaran, P.; Mohanamurugan, S.; Vijay, R.; Singaravelu, D. L.; Vinod, A.; Sanjay, M. R.; Siengchin, S.; Bhat, K. S. Influence of Wood Dust Fillers on the Mechanical, Thermal, Water Absorption and Biodegradation Characteristics of Jute Fiber Epoxy Composites. J. Polym. Res. 2020, 27, 9–21. DOI: https://doi.org/10.1007/s10965-019-1975-2.
- Ge, X.; Yu, L.; Liu, Z.; Liu, H.; Chen, Y.; Chen, L. Developing Acrylated Epoxidized Soybean Oil Coating for Improving Moisture Sensitivity and Permeability of Starch-Based Film. Int. J. Biol. Macromol. 2019, 1, 370–375. DOI: https://doi.org/10.1016/j.ijbiomac.2018.11.239.
- Juliana, A. H.; Lee, S. H.; Paridah, M. T.; Ashaari, Z.; Lum, W. C. Development and Characterization of Wood and Non-Wood Particle Based Green Composites. In Green Biocomposites; Jawaid, M., Sapuan, S., Alothman, O., Eds.; Springer: Cham, Switzerland, 2017; pp. 181–198. DOI: https://doi.org/10.1007/978-3-319-46610-1_8.
- Zhou, Y.; Fan, M.; Chen, L. Interface and Bonding Mechanisms of Plant Fibre Composites: An Overview. Compo. Part B Eng. 2016, 15, 31–45. DOI: https://doi.org/10.1016/j.compositesb.2016.06.055.
- Latif, R.; Wakeel, S.; Zaman Khan, N.; Noor Siddiquee, A.; Lal Verma, S.; Akhtar Khan, Z. Surface Treatments of Plant Fibers and Their Effects on Mechanical Properties of Fiber-Reinforced Composites: A Review. J. Reinf. Plast. Compos. 2019, 38, 15–30. DOI: https://doi.org/10.1177/0731684418802022.
- DeArmitt, C.; Rothon, R. Dispersants and Coupling Agents. In Applied Plastics Engineering Handbook: Processing and Materials; Myer, K., Ed.; William Andrew Publishing: USA, 2017; pp. 501–516. DOI: https://doi.org/10.1016/B978-0-323-39040-8.00022-5.
- Coleman, E. A. Plastics Additives. In Applied Plastics Engineering Handbook; Myer, K. Ed.; William Andrew Publishing: Sawston, Cambridge, 2011; pp. 419–428. DOI: https://doi.org/10.1016/B978-1-4377-3514-7.10023-6.
- Stark, N. M.; Gardner, D. J. Outdoor Durability of Wood–Polymer Composites. In Wood–Polymer Composites; Kristiina, O., Niska, M. S., Eds.; Woodhead Publishing: Sawston, Cambridge, 2008; pp. 142–165. DOI: https://doi.org/10.1533/9781845694579.142.
- Abdullah, S. A. S.; Zuhudi, N. Z. M.; Anuar, N. I. S.; Isa, M. D. Anuar, NI. Mechanical and Thermal Characterization of Alkali Treated Kenaf Fibers. IOP Conf. Ser: Mater. Sci. Eng. 2018, 370, 012048. DOI: https://doi.org/10.1088/1757-899X/370/1/012048.
- Ashori, A. Hybrid Thermoplastic Composites Using Nonwood Plant Fibers. In Hybrid Polymer Composite Materials 2017; Vijay Kumar, T., Manju Kumari, T., Asokan, P., Eds.; Woodhead Publishing: Sawston, Cambridge, 2017; pp. 39–56. DOI: https://doi.org/10.1016/B978-0-08-100787-7.00002-0.
- Väisänen, T.; Das, O.; Tomppo, L. A Review on New Bio-Based Constituents for Natural Fiber-Polymer Composites. J. Clean. Prod. 2017, 149, 582–596. DOI: https://doi.org/10.1016/j.jclepro.2017.02.132.
- Xie, Y.; Hill, C. A.; Xiao, Z.; Militz, H.; Mai, C. Silane Coupling Agents Used for Natural Fiber/Polymer Composites: A Review. Compos. Part A. Appl. Sci. Manuf. 2010, 41, 806–819. DOI: https://doi.org/10.1016/j.compositesa.2010.03.005.
- Bledzki, A. K.; Mamun, A. A.; Lucka-Gabor, M.; Gutowski, V. S. The Effects of Acetylation on Properties of Flax Fibre and Its Polypropylene Composites. Express Polym. Lett. 2008, 2, 413–422. DOI: https://doi.org/10.3144/expresspolymlett.2008.50.
- Fuqua, M. A.; Ulven, C. A. Characterization of Polypropylene/Corn Fiber Composites with Maleic Anhydride Grafted Polypropylene. J. Biobased Mat. Bioenergy 2008, 2, 258–263. DOI: https://doi.org/10.1166/jbmb.2008.405.
- Fuqua, M. A.; Huo, S.; Ulven, C. A. Natural Fiber Reinforced Composites. Polym. Rev. 2012, 52, 259–320. DOI: https://doi.org/10.1080/15583724.2012.705409.
- Ahmad, R.; Hamid, R.; Osman, S. A. Physical and Chemical Modifications of Plant Fibres for Reinforcement in Cementitious Composites. Adv. Civ. Eng. 2019, 2019, 18. Article ID 5185806. DOI: https://doi.org/10.1155/2019/5185806.
- Arrakhiz, F. Z.; El Achaby, M.; Kakou, A. C.; Vaudreuil, S.; Benmoussa, K.; Bouhfid, R.; Fassi-Fehri, O.; Qaiss, R. Mechanical Properties of High-Density Polyethylene Reinforced with Chemically Modified Coir Fibers: Impact of Chemical Treatments. Mater. Des. 2012, 37, 379–383. DOI: https://doi.org/10.1016/j.matdes.2012.01.020.
- Bhattacharjee, S.; Bajwa, D. S. Degradation in the Mechanical and Thermo-Mechanical Properties of Natural Fiber Filled Polymer Composites Due to Recycling. Constr. Build. Mater. 2018, 30, 1–9. DOI: https://doi.org/10.1016/j.conbuildmat.2018.03.010.
- Tufan, M.; Güleç, T.; Peşman, E.; Ayrilmis, N. Ayrilmis, N. Technological and Thermal Properties of Thermoplastic Composites Filled with Heat-Treated Alder Wood. Bioresources 2016, 11, 3153–3164. DOI: https://doi.org/10.15376/biores.11.2.3153-3164.
- Guo, Y.; Zhu, S.; Chen, Y.; Li, D. Thermal Properties of Wood-Plastic Composites with Different Compositions. Materials 2019, 12, 881–893. DOI: https://doi.org/10.3390/ma12060881.
- Golofit, T.; Zielenkiewicz, T.; Gawron, J.; Cieslak, K.; Tomaszewski, W.; Chmielarek, M.; Maksimowski, P.; Pawlowski, W. Examination of Chemical Composition of Wood-Plastic Composites by Differential Scanning Calorimetry and Infrared Spectroscopy. Polimery 2019, 64, 333–339. DOI: https://doi.org/10.14314/polimery.2019.5.3.
- Jeske, H.; Schirp, A.; Cornelius, F. Development of a Thermogravimetric Analysis (TGA) Method for Quantitative Analysis of Wood Flour and Polypropylene in Wood Plastic Composites (WPC). Thermochim. Acta 2012, 543, 165–171. DOI: https://doi.org/10.1016/j.tca.2012.05.016.
- Renneckar, S.; Zink Sharp, A. G.; Ward, T. C.; Glasser, W. G. Compositional Analysis of Thermoplastic Wood Composites by TGA. J. Appl. Polym. Sci. 2004, 93, 1484–1492. DOI: https://doi.org/10.1002/app.20599.
- Cao, X.; Zhu, M.; Fan, F.; Yang, Y.; Zhang, Q.; Chen, Y.; Wang, X.; Deng, Z. All-Cellulose Composites Based on Jute Cellulose Nanowhiskers and Electrospun Cellulose Acetate (CA) Fibrous Membranes. Cellulose 2020, 27, 1385–1391. DOI: https://doi.org/10.1007/s10570-019-02880-5.
- Narayanasamy, P.; Balasundar, P.; Senthil, S.; Sanjay, M. R.; Siengchin, S.; Khan, A.; Asiri, A. M. Characterization of a Novel Natural Cellulosic Fiber from Calotropis Gigantea Fruit Bunch for Ecofriendly Polymer Composites. Int. J. Biol. Macromol. 2020, 150, 793–801. DOI: https://doi.org/10.1016/j.ijbiomac.2020.02.134.
- Giri, J.; Adhikari, R.; Biodegradable Copolyester-Based Natural Fibers–Polymer Composites: Morphological, Mechanical, and Degradation Behavior. In Advances in Sustainable Polymers; Katiyar, V.; Kumar, A.; Mulchandani, N., Eds.; Springer: Singapore, 2020; 289–319 DOI: https://doi.org/10.1007/978-981-15-1251-3_13.
- Mirabella, F. M.; Bafna, A. Determination of the Crystallinity of Polyethylene/α‐Olefin Copolymers by Thermal Analysis: Relationship of the Heat of Fusion of 100% Polyethylene Crystal and the Density. J. Polym. Sci. B Polym. Phys. 2002, 40, 1637–1643. DOI: https://doi.org/10.1002/polb.10228.