References
- Rempe KR, Smith KS. SIMULATE-3 pin power reconstruction: methodology and benchmarking. Nucl Sci Eng. 1989;103:334–342.
- Iwamoto T, Yamamoto M. Pin power reconstruction methods of the few-group BWR core simulator NEREUS. J Nucl Sci Technol. 1999;36:1141–1152.
- Bahadir T, Lindahl S-Ö, Palmtag S. SIMULATE-4 multigroup nodal code with microscopic depletion model [CD-ROM]. Paper presented at: Proceedings of the M&C2005; 2005 Sep 12–15; Avignon, France.
- Yamaji K, Matsumoto H, Nakano M. Development of the new pin-by-pin core calculation method with embedded heterogeneous assembly calculation [CD-ROM]. Paper presented at: Proceedings of the Physor2006; 2006 Sep 10–14; Vancouver, Canada.
- Cho NZ, Yuk S, Yoo HJ, Yun S. Overlapping local/global iteration framework for whole-core transport solution [CD-ROM]. Paper presented at: Proceedings of the Physor2012; 2012 Apr 15–20; Knoxville, TN.
- Tada K, Yamamoto A, Yamane Y, Kitamura Y. Applicability of the diffusion and simplified P3 theories for pin-by-pin geometry of BWR. J Nucl Sci Technol. 2008;45:997–1008.
- Tada K, Yamamoto A, Yamane Y. Treatment of staggered mesh for BWR pin-by-pin core analysis. J Nucl Sci Technol. 2009;46:163–174.
- Tatsumi M, Yamamoto A. Advanced PWR core calculation based on multi-group nodal-transport method in three-dimensional pin-by-pin geometry. J Nucl Sci Technol. 2003;40:376–387.
- Hoareau F, Fiscounakis M, Couyras D, Gullo M, Pora Y. A pin by pin microscopic depletion scheme using an homogeneous core calculation with pin-power reconstruction [CD-ROM]. Paper presented at: Proceedings of the ICAPP’09; 2009 May 10–14; Tokyo, Japan.
- Stålek M, Demazière C. Development and validation of a cross-section interface for PARCS. Ann Nucl Energy. 2008;35:2397–2409.
- Iwamoto T, Yamamoto M. Advanced nodal methods of the few-group BWR core simulator NEUREUS. J Nucl Sci Technol. 1999;36:996–1008.
- Yokota H. Suchikaisekinyumon I. Tokyo: Kaisei Publishing; 2003. Japanese.
- Karve A, Turinsky PJ. FORMOSA-B: a boling water reactor in-core management optimization package II. Nucl Technol. 1999;131:48–68.
- Okuno H, Naito Y, Suyama K. OECD/NEA burnup credit criticality benchmarks phase IIIb: burnup calculations of BWR fuel assemblies for storage and transport. Ibaraki: Japan Atomic Energy Research Institute; 2002.
- Yamamoto A, Ikehara T, Ito T, Saji E. Benchmark problem suite for reactor physics study of LWR next generation fuels. J Nucl Sci Technol. 2002;39:900–912.
- Fujita T, Tada K, Endo T, Yamamoto A, Kosaka S, Hirano G, Nozaki K. An optimization approach to establish an appropriate energy group structure for BWR pin-by-pin core analysis. J Nucl Sci Technol. 2012;49:689–707.
- HELIOS methods (Version 1.11). Idaho Falls (ID): Studsvik Scandpower; 2009.
- Hébert A. A consistent technique for the pin-by-pin homogenization of a pressurized water reactor assembly. Nucl Sci Eng. 1993;113:227–238.
- Yamamoto A, Ikeno T. Impact of pin-by-pin thermal-hydraulic feedback modeling on steady-state core characteristics. Nucl Technol. 2005;149:175–188.
- Ama T, Hyoudou H, Takeda T. Effect of radial void distribution within fuel assembly on assembly neutronic characteristics. J Nucl Sci Technol. 2002;39:90–100.
- Tada K, Yamamoto A, Kosaka S, Hirano G, Yamane Y. Development of a prototype pin-by-pin fine mesh calculation code for BWR core analysis [CD-ROM]. Paper presented at: Proceedings of the Physor’08; 2008 Sep 14–19; Interlaken, Switzerland.