The verification tests of the melting conditions for homogenization of metallic LLW at the JAEA

References

• International Atomic Energy Agency (IAEA). Application of thermal technologies for processing of radioactive waste: IAEA. 2006. IAEA-TECDOC-1527.
   Google Scholar
• Mitsuta Y, Takeuchi Y, Minami T, Kataoka H, Aoyama A, Mutou S, Torita K, Torii A. [Melting treatment of non-combustible solid waste for MIHAMA nuclear power plant.] Nihon-Genshiryoku-Gakkai 2003-Nen Aki-No-Taikai Yoko-Shu [Proc Ann Fall Mtg At Energy Soc Jpn]; 2003 Sep 24–26; Shizuoka (Japan) [in Japanese].
   Google Scholar
• Tsuji Y. Plasma arc melting treatment of low level radioactive waste with centrifugal hearth. Purazuma-Kakuyugo-Gakkai Shi [J. Plasma Fusion Res.] 1997;73:949–955 [in Japanese].
   Google Scholar
• Nakamura H, Fujiki K. Melting tests for recycling slightly radioactive metallic wastes arising from decommissioning. Nucl Technol. 1997;117:195–205.
   Web of Science ®Google Scholar
• Nakashio N, Higuchi H, Momma T, Kozawa K, Touhei T, Sudou T, Mitsuda M, Kurosawa S, Hemmi K, Ishikawa J, Kato M, Sato M. Trial operation of the advanced volume reduction facilities for LLW at JAEA. J Nucl Sci Technol. 2007;44:441–447.
   Web of Science ®Google Scholar
• Kagaku-Kougakukai [Soc. Chem. Eng. Jpn.]. Kagaku kougaku benran [Chemical engineering handbook]. 5th ed. Tokyo: Maruzen; 1988. p. 890 [in Japanese].
   Google Scholar
• Nihon-Imono-Kyokai [Jpn. Foundry Soc.]. Imono benran [Foundries handbook]. Tokyo: Maruzen; 1986. p. 498 [in Japanese].
   Google Scholar
• Sato Y, Sugisawa K, Aoki D, Yamamura T. [Viscosity of molten Fe-Cr-Ni ternary alloy as a basic system of stainless steel.] Zairyo To Purosesu [Curr Adv Mater Proc]. 2003;16:1017 [in Japanese].
   Google Scholar
• Higuchi H, Ohsugi T, Nakashio N, Momma T, Touhei T, Ishikawa J, Iseda H, Mitsuda M, Ishihara K, Sudou T, Yano M, Kato M, Irie H, Yokota A, Takahashi K, Makino M, Ichinosawa Y, Someya K, Kozawa K, Kurosawa S, Hemmi K. Construction, management and operation of advanced volume reduction facilities. Japan Atomic Energy Agency; 2007. JAEA-Technology 2007-038 [in Japanese].
   Google Scholar
• Touhei T, Someya K, Takahashi K, Iseda H, Kozawa K, Momma T. Improvement of the casting process in the metal melting system. Japan Atomic Energy Agency; 2009. JAEA-Technology 2009-031 [in Japanese].
   Google Scholar
• Touhei T, Nakashio N, Ohsugi T, Ishikawa J, Mizoguchi T, Hanawa R, Someya K, Takahashi K, Iseda H, Kozawa K, Momma T. Verification of improvement of the casting process in metal melting system. Japan Atomic Energy Agency; 2010. JAEA-Technology 2010-008 [in Japanese].
   Google Scholar
• Sakai A, Amazawa H, Nakata H, Takahashi K, Kihara S. Selection of main nuclides from the viewpoint of safety assessment for near surface disposal of low-level radioactive waste generated from research, industrial and medical facilities -Part 3. Japan Atomic Energy Agency; 2010. JAEA-Technology 2010-021 [in Japanese].
   Google Scholar
• Matsumura K, Hirai T, Kitajima H, Hayashi M, Kanagawa Y, Taniguchi T, Okamoto M. [A study on fabrication technology of waste package for non-combustible miscellaneous solid waste from nuclear power plant.] Hoshasei-Haikibutsu-Kenkyuu [J. Nucl Fuel Cycle Environ.] 1996;2:153–181 [in Japanese].
   Google Scholar
• Nakashio N, Nakashima M, Hirabayashi T. [Characterization of 50L-scale solidified products yielded by melting treatment of miscellaneous solid wastes and evaluation of radioisotope tracer distribution.] Nihon-Genshiryoku-Gakkai Wabun-Ronbun Shi [Trans At Energy Soc Jpn.] 2004;3:279–287 [in Japanese].
   Google Scholar
• Obata M, Teshima T, Kurahashi T, Kanagawa Y, Hayashi M, Karigome S, Akagawa Y. [Radionuclides behavior during nuclear waste melting by the induction heat melting system.] Genshiryoku-Bakkuendo-Kenkyuu [J. Nucl Fuel Cycle Environ.] 1998;4:21–30 [in Japanese].
   Google Scholar
• Amakawa T, Adachi K, Yasui S. [Fundamental research on thermal plasma technology for treatment of low level radioactive solid waste part II – influence of waste composition on material properties of solidified products.] Denki-Gakkai Ronbun Shi A [Trans IEE Jpn.]. 1999;119-A:357–364 [in Japanese].
   Google Scholar