References
- The RELAP5 Development Team. REALP5/MOD3 Code manual volume IV models and correlations, NUREG/CR-5535, 1995, US Nuclear Regulatory Commission.
- Ozaki T, Hibiki T, et al. Effect of void fraction covariance on two-fluid model based code calculation in pip flow. Prog Nucl Energy. 2018;108:319–333.
- Ozaki T, Hibiki T, Miwa S, et al. Development of one-dimensional two-fluid model with consideration of void fraction covariance effect. J Nucl Sci Technol. 2018;55:575–598.
- Yun BJ, Euh DJ, Song CH. Downcomer boiling phenomena during the reflood phase of a large-break LOCA for the APR1400. Nucl Eng Design. 2008;238:2064–2074.
- Lee DW, No HC, Lee EH, et al. Experiment and RELAP5 analysis for the downcomer boiling of APR1400 under LBLOCA reflood phase”. Nucl Technol. 2006;153:175–183.
- Euh DJ, Huh BG, Yun BJ, Song CH and Kim IG. Performance evaluation of the safety analysis codes for subcooled boiling in a nuclear reactor downcomer during the late reflood phase of an LBLOCA. Nucl Technol. 2008;164:368–384.
- Ishii M. One-dimensional drift-flux model and constitutive equations for relative motion between phases in various two-phase flow regimes, Technical Report, ANL-77-47, 1997, Argonne National Laboratory, Argonne, IL, USA.
- Kataoka I, Ishii M. Drift flux model for large diameter pipe and new correlation for pool void fraction. Int J Heat Mass Transfer. 1987;30:1927–1939.
- Zuber N, Findlay JA. Average volumetric concentration in two-phase flow systems. J Heat Transfer. 1965;87:453–468.
- Hibiki T, Ishii M. One-dimensional drift-flux model for two-phase flow in a large diameter pipe. Int J Heat Mass Transfer. 2003;46:1773–1790.
- Hibiki T, Situ R Mi Y, et al. Modeling of bubble-layer thickness for formulation of one-dimensional interfacial area transport equation in subcooled boiling in two-phase flow. Int J Heat Mass Transfer. 2003;46:1409–1423.