232
Views
2
CrossRef citations to date
0
Altmetric
Article

Proposal and applicability of estimated criticality lower-limit multiplication factor using the bootstrap method

ORCID Icon, ORCID Icon & ORCID Icon
Pages 1008-1017 | Received 25 Sep 2020, Accepted 07 Mar 2021, Published online: 30 Jun 2021

References

  • Okuno H. Development of a statistical method for evaluation of estimated criticality lower-limit multiplication factor depending on uranium enrichment and H/Uranium-235 atomic ratio. J Nucl Sci Technol. 2007;44(2):137–146.
  • Owen DB. Factors for one-sided tolerance limits and for variables sampling plans. Washington D.C: Sandia Corporation; 1963. ( SCR-607).
  • Efron B. Bootstrap methods: another look at the jackknife. Ann Stat. 1979;7(1):1–26.
  • Efron B, Tibshirani RJ. An introduction to the bootstrap. New York (NY): Chapman & Hall; 1994.
  • Hayashi T, Endo T, Yamamoto A. Calculation method of estimated criticality lower-limit multiplication factor using the bootstrap method. Portland (OR): Proc. M&C; 2019 [2019 Aug 25–29].
  • Kiedrowski BC, Brown FB, Conlin JL, et al. Whisper: sensitivity/uncertainty-based computational methods and software for determining baseline upper subcritical limits. Nucl Sci Eng. 2015;181(1):17–47.
  • Hayashi T, Nishioka F, Endo T, et al. Estimated criticality lower-limit multiplication factor of low-enriched uranium dioxide-concrete system using the bootstrap method. EPJ Web Conf. 2021;247:17001.
  • Hayashi T, Endo T, Yamamoto A. Application of bootstrap method to estimated criticality lower-limit multiplication factor considering nuclear data-induced uncertainty. Trans Am Nucl Soc. 2020;122:458–461.
  • Werner CJ, editor. MCNP user’s manual: code version 6.2. LA-UR-17-29981. Los Alamos (NM): Los Alamos National Laboratory; 2017.
  • Haeusler E, Mason DM, Newton MA. Weighted bootstrapping of means. Cwi Q. 1991;4:213–228.
  • Palmiotti G, Salvatores M. Use of integral experiments in the assessment of large liquid-metal fast breeder reactor basic design parameters. Nucl Sci Eng. 1984;87(3):333–348.
  • Aliberti G, Palmiotti G, Salvatores M, et al. Nuclear data sensitivity, uncertainty and target accuracy assessment for future nuclear systems. Ann Nucl Energy. 2006;33(8):700–733.
  • Broadhead BL, Rearden BT, Hopper CM, et al. Sensitivity- and uncertainty-based criticality safety validation techniques. Nucl Sci Eng. 2004;146(3):340–366.
  • International Criticality Safety Benchmark Evaluation Project (ICSBEP) [Internet]. France: OECD nuclear energy agency. 2019 Oct 1 cited 2020 Sep 21. Available from https://www.oecd-nea.org/science/wpncs/icsbep/handbook.html
  • Rearden BT, Jessee MA, editors. SCALE code system. ORNL/TM-2005/39 ver. 6.2.3.. Oak Ridge (TN): Oak Ridge National Laboratory; 2016.
  • Kiedrowski BC, Brown FB, Wilson PPH. Adjoint-weighted tallies for k-eigenvalue calculations with continuous-energy Monte Carlo. Nucl Sci Eng. 2011;168(3):226–241.
  • Misawa T, Unesaki H, Pyeon C. Nuclear reactor physics experiments. Kyoto (Japan): Kyoto University Press; 2010.
  • Jones FE, Harris GL. ITS-90 density of water formulation for volumetric standards calibration. J Res Natl Inst Stan. 1992;97(3):335–340.
  • Chadwick MB, Herman M, Obložinský P, et al. ENDF/B-VII.1 nuclear data for science and technology: cross sections, covariances, fission product yields and decay data. Nucl Data Sheets. 2011;112(12):2887–2996.
  • Okuno H, Nomura Y, Ryufuku S (translators). Nuclear criticality safety handbook: version 2 (English translation). Tokyo (Japan): Japan Atomic Energy Research Institute; 2001. JAERI-Review-2001-028

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.