Multi-objective optimization based on economic analysis for a printed circuit heat exchanger with application to Brayton cycle

References

• Huang C, Cai W, Wang Y, et al. Review on the characteristics of flow and heat transfer in printed circuit heat exchangers. Appl Therm Eng. 2019;153: 190–205.
   Web of Science ®Google Scholar
• Liu G, Huang Y, Wang J, et al. A review on the thermal-hydraulic performance and optimization of printed circuit heat exchangers for supercritical CO2 in advanced nuclear power systems. Renewable Sustainable Energy Rev. 2020;133: 110290.
   Web of Science ®Google Scholar
• Yang Y, Bai W, Wang Y, et al. Coupled simulation of the combustion and fluid heating of a 300MW supercritical CO2 boiler. Appl Therm Eng. 2017;113:259–267.
   Web of Science ®Google Scholar
• Mylavarapu SK, Sun X, Glosup RE, et al. Thermal hydraulic performance testing of printed circuit heat exchangers in a high-temperature helium test facility. Appl Therm Eng. 2014;65: 605–614.
   Web of Science ®Google Scholar
• Ren Z, Zhao C-R, Jiang P-X, et al. Investigation on local convection heat transfer of supercritical CO2 during cooling in horizontal semicircular channels of printed circuit heat exchanger. Appl Therm Eng. 2019;157: 113697.
   Web of Science ®Google Scholar
• Seo J-W, Kim Y-H, Kim D, et al. Pressure drop characteristics in straight microchannel of printed circuit heat exchangers. Entropy 2015;17:3438–3457.
   Web of Science ®Google Scholar
• Lee S-M, Kim K-Y. Optimization of zigzag flow channels of a printed circuit heat exchanger for nuclear power plant application. J Nucl Sci Technol. 2012;49:343–351.
   Web of Science ®Google Scholar
• Nikitin K, Kato Y, Ngo L. Printed circuit heat exchanger thermal–hydraulic performance in supercritical CO2 experimental loop. Int J Refrig. 2006;29:807–814.
   Web of Science ®Google Scholar
• Kim IH, No HC, Lee JI, et al. Thermal hydraulic performance analysis of the printed circuit heat exchanger using a helium test facility and CFD simulations. Nucl Eng Des. 2009;239:2399–2408.
   Web of Science ®Google Scholar
• Yang Y, Li H, Yao M, et al. Investigation on the effects of narrowed channel cross-sections on the heat transfer performance of a wavy-channeled PCHE. International J Heat Mass Transfer. 2019;135: 33–43.
   Web of Science ®Google Scholar
• Khan HH, Sharma MAA, Srivastava A, et al. Thermal-hydraulic characteristics and performance of 3D wavy channel based printed circuit heat exchanger. Appl Therm Eng. 2015;87:519–528.
   Web of Science ®Google Scholar
• Nikitin K, Kato Y, Ishizuka T. ICONE15-10826 EXPERIMENTAL THERMAL-HYDRAULICS COMPARISON OF MICROCHANNEL HEAT EXCHANGERS WITH ZIGZAG CHANNELS AND S-SHAPED FINS FOR GAS TURBINE REACTORS. The Proceedings of the International Conference on Nuclear Engineering (ICONE); 2007 Apr 22–26;  Nagoya, Japan. 2007; 2007.15:_ICONE1510-_ICONE.
   Google Scholar
• Ngo TL, Kato Y, Nikitin K, et al. New printed circuit heat exchanger with S-shaped fins for hot water supplier. Exp Therm Fluid Sci. 2006;30:811–819.
   Web of Science ®Google Scholar
• Kim DE, Kim MH, Cha JE, et al. Numerical investigation on thermal–hydraulic performance of new printed circuit heat exchanger model. Nucl Eng Des. 2008;238:3269–3276.
   Web of Science ®Google Scholar
• Li X, Tang D, Fan Y, et al. Numerical analysis of slotted airfoil fins for printed circuit heat exchanger in S-CO2 Brayton Cycle. J Nucl Eng Radiat Sci. 2019;5. DOI:https://doi.org/10.1126/science.aax5123
   Web of Science ®Google Scholar
• Lance BW, Carlson MD Printed circuit heat exchanger flow distribution measurements. 2017.
   Google Scholar
• Chu WX, Bennett K, Cheng J, et al. Numerical study on a novel hyperbolic inlet header in straight-channel printed circuit heat exchanger. Appl Therm Eng. 2019;146:805–814.
   Web of Science ®Google Scholar
• Lee S-M, Kim K-Y, Kim S-W. Multi-objective optimization of a double-faced type printed circuit heat exchanger. Appl Therm Eng. 2013;60:44–50.
   Web of Science ®Google Scholar
• Saeed M, Kim M-H. Thermal-hydraulic analysis of sinusoidal fin-based printed circuit heat exchangers for supercritical CO2 Brayton cycle. Energy Convers Manag. 2019;193:124–139.
   Web of Science ®Google Scholar
• Yang Y, Li H, Yao M, et al. Optimizing the size of a printed circuit heat exchanger by multi-objective genetic algorithm. Appl Therm Eng. 2020;167:114811.
   Web of Science ®Google Scholar
• Meshram A, Jaiswal AK, Khivsara SD, et al. Modeling and analysis of a printed circuit heat exchanger for supercritical CO2 power cycle applications. Appl Therm Eng. 2016;109:861–870.
   Web of Science ®Google Scholar
• Hesselgreaves JE, Law R, Reay DA. Chapter 2 - industrial compact exchangers. In: Hesselgreaves JE, Law R, Reay DA, editors. Compact heat exchangers. Second ed. Oxford: Elsevier Inc.; 2017. p. 35–89.
   Google Scholar
• Peter Fritzson VE, Idebrant A, Aronsson P, et al. Modelica – a strongly typed system specification language for safe engineering practices; 2008. OAI:CiteSeerX.psu:10.1.1.113.3433.
   Google Scholar
• Gnielinski V New equations for heat and mass transfer in the turbulent flow in pipes and channels. NASA STI/Recon Technical Report A. 1975;41:8–16.
   Google Scholar
• Ngo TL, Kato Y, Nikitin K, et al. Heat transfer and pressure drop correlations of microchannel heat exchangers with S-shaped and zigzag fins for carbon dioxide cycles. Exp Therm Fluid Sci. 2007;32:560–570.
   Web of Science ®Google Scholar
• Yoon SH, No HC, Kang GB. Assessment of straight, zigzag, S-shape, and airfoil PCHEs for intermediate heat exchangers of HTGRs and SFRs. Nucl Eng Des. 2014;270:334–343.
   Web of Science ®Google Scholar
• Kim ES, Oh CH, Sherman S. Simplified optimum sizing and cost analysis for compact heat exchanger in VHTR. Nucl Eng Des. 2008;238:2635–2647.
   Web of Science ®Google Scholar
• Xu J, Sun E, Li M, et al. Key issues and solution strategies for supercritical carbon dioxide coal fired power plant. Energy. 2018;157:227–246.
   Web of Science ®Google Scholar