References
- Desquines J, Koss DA, Motta AT, et al. The issue of stress state during mechanical test to assess cladding performance during reactivity-initiated accident (RIA). Journal of Nuclear Materials. 2011;412 2 :250–267. .doi:10.1016/j.jnucmat.2011.03.015 https://www.sciencedirect.com/science/article/pii/S002231151100273X .
- Papin J, Cazalis B, Frizonnet J, et al. Summary and interpretation of the CABRI REP-Na program. Nuclear Technology. 2007;157(3):230–250 doi:10.13182/NT07-A3815 .
- Schmitz F, Papin J. High burnup effects on fuel behaviour under accident conditions: the tests CABRI REP-Na. Journal of Nuclear Materials. 1999;270 :55–64. .doi:10.1016/S0022-3115(98)00895-2 https://www.sciencedirect.com/science/article/pii/S0022311598008952 .
- Fuketa T, Sasajima H. Behavior of high burnup PWR fuels with low-tin Zircaloy-4 cladding under reactivity-initiated-accident conditions. Nuclear Technology. 2001;133(1):50–62 doi:10.13182/NT01-A3158 https://doi.org/10.13182/NT01-A3158 .
- Fuketa T, Nagase F, Ishijima K, et al. NSRR/RIA experiments with high-burnup PWR fuels. Nuclear Safety. 1996;37(4):328–342 http://inis.iaea.org/search/search.aspx?orig_q=RN:37113993ER.
- Neogy S, Srivastava D, Chakravartty J, et al. Microstructural evolution in Zr-1Nb and Zr-1Nb-1Sn-0.1Fe Alloys. Metallurgical and Materials Transactions A. 2007;38(3):485–498 .doi:10.1007/s11661-006-9026-0DO .
- Hang T, Xitao W, Weijia G, et al. Recrystallization behavior of cold-rolled Zr–1Nb alloy. Journal of Nuclear Materials. 2015;456:321–328. .doi:10.1016/j.jnucmat.2014.09.084 https://www.sciencedirect.com/science/article/pii/S0022311514006904 .
- Lee D. Recrystallization and mechanical behavior of Zircaloy-2 tubing. Journal of Nuclear Materials. 1970;37 2 :159–170. .doi:10.1016/0022-3115(70)90082-6 https://www.sciencedirect.com/science/article/pii/0022311570900826 .
- Sauby M, Lee D. Recovery behavior of cold-worked and quenched Zircaloy with varying oxygen content. Journal of Nuclear Materials. 1974;50(2):175–182. .doi:10.1016/0022-3115(74)90154-8 https://www.sciencedirect.com/science/article/pii/0022311574901548 .
- Nagai N, Kakuma T, Fujita K. Texture control of Zircaloy tubing during tube reduction. ASTM Int. 1982 ASTM STP 754 ;26–38.
- Bauer AA, Lowry LM. Tensile properties and annealing characteristics of H. B. Robinson spent fuel cladding. Nuclear Technology. 1978;41(3):359–372 doi:10.13182/NT78-A32120 https://doi.org/10.13182/NT78-A32120 .
- Steinberg E, Weidinger H, Schaa A. Analytical approaches and experimental verification to describe the influence of cold work and heat treatment on the mechanical properties of Zircaloy cladding tubes. ASTM Int. 1984 ASTM STP 824 ;106–121.
- Bäro G, Wessjohann H, Nicoll A. On the short-time recrystallization of Zircaloy-4 above 600°C. ASTM Int. 1984 ASTM STP 824 ;200–209.
- Merle P, Vauglin C, Fantozzi G, et al. Study by thermoelectric power measurements of recovery and recrystallization of cold-rolled Zircaloy-4 sheets. ASTM Int. 1987 ASTM STP 939 ;555–576.
- Lim Y-S, Kim H-G, Jeong Y-H. Recrystallization behavior of Zr-xNb Alloys. Materials Transactions. 2008;49(7):1702–1705. .doi:10.2320/matertrans.MRP2008020 .
- Rumball W. The effect of chromium, oxygen and microstructure on the hardness of zirconium-chromium alloys. Journal of the Less Common Metals. 1975;39(1):35–42 . .doi:10.1016/0022-5088(75)90215-5 https://www.sciencedirect.com/science/article/pii/0022508875902155 .
- Sarkar A, Chakravartty J. Hot deformation behavior of Zr–1Nb alloy: characterization by processing map. Journal of Nuclear Materials. 2013;440(1):136–142. .doi:10.1016/j.jnucmat.2013.04.080 https://www.sciencedirect.com/science/article/pii/S0022311513006983 .
- Cazalis B, Desquines J, Poussard C, et al. The PROMETRA program: fuel cladding mechanical behavior under high strain rate. Nucl Technol. 2007;157:215–229 doi:10.13182/NT07-A3814 https://doi.org/10.13182/NT07-A3814 .
- Hunt CEL, Schulson EM. Recrystallization of Zircaloy-4 during transient heating. Journal of Nuclear Materials. 1980;92:184–190. doi:10.1016/0022-3115(80)90101-4 https://www.sciencedirect.com/science/article/pii/0022311580901014 .
- Gagné M, Schulson E. The effects of annealing on cold-worked Zr3Al. Metall Mater Trans a-Physical Metallurgy Mater Sci. 1976;7:1775–1783 doi:10.1007/BF02817896.
- D. O. Zimmermann AJ, Padilha AF. Rolling and recrystallization behavior of pure zirconium and zircaloy-4. Matéria (Rio J.). 2019;24(3). DOI:10.1590/s1517-707620190003.0767.
- Dunlop J, Bréchet Y, Legras L, et al. Modelling isothermal and non-isothermal recrystallisation kinetics: application to Zircaloy-4. Journal of Nuclear Materials. 2007;366(1–2):178–186 doi:10.1016/j.jnucmat.2006.12.074. (https://www.sciencedirect.com/science/article/pii/S0022311507000104) .
- Sills HE, Holt RA. Predicting high-temperature transient deformation from microstructural models. Zirconium Nucl Ind. 1979 ASTM STP 681 ; 325–341. .
- Garzarolli F, Manzel R, Reschke S, et al. Review of corrosion and dimensional behavior of Zircaloy under water reactor conditions. ASTM Int. 1979 ASTM STP 681 ;91–106.
- Muntasell J, Navarro J, Cesari E, et al. Recovery and recrystallization of zircaloy-4. Thermochimica Acta. 1985;87:169–176 doi:10.1016/0040-6031(85)85332-6. .