References
- Alashe, W. D.; Barnes, E. B.; Bath, K. L.; Jacobsen, K. E.; and O'Keefe, M. K. (1994). “Engine Idle Quality Robustness Using Taguchi Methods”. Proceedings of the Symposium on Taguchi Methods, American Supplier Institute Press, Dearborn, MI, pp. 111–121.
- American Supplier Institute (1993). Advanced Course in Quality Engineering. American Supplier Institute Press, Dearborn, MI.
- Box, G. E. P. (1988). “Signal-to-Noise Ratios, Performance Criteria, and Transformations” (with discussion). Technometrics 30, pp. 1–40.
- Kacker, R. N. (1985). “Off-Line Quality Control, Parameter Design, and the Taguchi Method”. Journal of Quality Technology 17, pp. 176–188.
- Leon, R.; Shoemaker, A. C.; and Kacker, R. N. (1987). “Performance Measures Independent of Adjustment: An Explanation and Extension of Taguchi's Signal-to-Noise Ratios” (with discussion). Technometrics 9, pp. 253–285.
- Miller, A. and Wu, J. C. F. (1994). “Improving a Measurement System Through Designed Experiments”. Technical Report No. 224, Department of Statistics, University of Michigan, Ann Arbor, MI.
- Nair, V. N. (Editor) (1992). “Taguchi's Parameter Design: A Panel Discussion”. Technometrics 34, pp. 127–160.
- Nair, V. N. and Pregibon, D. (1986). “A Data Analysis Strategy for Quality Engineering Experiments”. AT&T Technical Journal 65, pp. 73–84.
- Nair, V. N. and Pregibon, D. (1988). Discussion of “Signal-to-Noise Ratios, Performance Criteria, and Transformations”. Technometrics 30, pp. 24–30.
- Nair, V. N. and Shoemaker, A. C. (1990). “The Role of Experimentation in Quality Engineering: A Review of Taguchi's Contributions” in Statistical Design and Analysis of Industrial Experiments edited by Subir Ghosh, Marcel Dekker, New York, NY, pp. 247–277.
- Phadke, M. S. (1989). Quality Engineering Using Robust Design. Prentice-Hall, Englewood Cliffs, NJ.
- Taguchi, G. (1991a). Taguchi Methods, Research and Development Vol. 1. American Suppliers Institute Press, Dearborn, MI.
- Taguchi, G. (1991b). Taguchi Methods, Signal-to-Noise Ratio for Quality Evaluation, Vol. 3. American Supplier Institute Press, Dearborn, MI.
- Vining, G. G. and Myers, R. H. (1990). “Combining Taguchi and Response Surface Philosophies: A Dual Response Surface Approach”. Journal of Quality Technology 22, pp. 38–45.
- Welch, W. J.; Yu, T. K.; Kang, S. M.; and Sacks, J. (1990). “Computer Experiments for Quality Control by Parameter Design”. Journal of Quality Technology 22, pp. 15–22.
- Winterbottom, A. (1992). “The Use of Generalized Signal-to-Noise Ratio to Identify Adjustment and Dispersion Factors in Taguchi Experiments”. Quality and Reliability Engineering International 8, pp. 45–56.